Counting matching models…
Update 7 Mar 2023: Added another version V2 that has a hole opening instead of open V slot. ***** Printed this https://www.thingiverse.com/thing:3606705 and wanted a drainer to go along. The original 3D model has been taken down, and all…
Update 24 Feb 2023: Added new versions (V2) and (V3) with some minor tweaks. Made the claws slightly weaker and the gap for the filament to snap into slightly smaller. PLA print tested working with Sunlu S2 Filament Dryer. A thinner and…
Update 6 May 2023: Added V2 with some hex holes and V3 with more holes for filament savings. ***** Remixed from https://www.printables.com/model/200469-bed-frame-phone-holder. I like the design but wanted something more secure. It should…
Update 7 May 2024: Added new version with holes to mount 80mm and 92mm fan. Also reduced the stand size to create clearance from rubber feet. ***** Bought this fanless mini PC from AliExpress to replace my existing old PC turned pfsense…
I have a few thick laptops to organize. I did a single laptop stand design a few days ago and expanded on that. Some overhang on the middle 2 ribs, will probably need supports to prevent sagging. ***** Want to buy me a coffee?…
I want an easy way to prevent the motherboard from touching the work surface while I'm testing/troubleshooting. Drive an M3 screw through the center hole to use it to locate the motherboard in position. It is possible to put the rest of…
Update 12 Oct 2023: I realized that the x4 was actually x1, my apologies for any confusion caused. Renamed x4 to x1, no change in design. Update 5 Oct 2023: Added STL version of the model. Cover to protect PCIe cards during storage. *****…
Update 17 Feb 2025: I have done a sturdier design V4 for a while now. Made the catch stronger (maybe too strong), added bridges at the 4 corners to reduce the square frame collapsing. Update 27 Apr 2023: Removed <Eibos Easdry Extender…
Update 4 Nov 2023: Added V2. I reduced the protruding height of the guide as I realized there is some interference when the print head moves to the edges. Simple clip-on bed corner guides for those who use magnetic sheet build plate on…
Update 9 Oct 2023: I have a Define S as well and the side wall surrounding this original feet is too tall for it, so I have reduced the side wall height from 15mm to 10mm for V2. This does not affect the height extension. Should work on…
I started with the taller version, I realized it still holds it stable at a lower height, though a taller stand is less prone to accidental toppling. (I extended the side wall for the taller version after printing, so the photo is…
I was looking for additional cooling for my slim case and liked don frechdachs' design but it was for a normal height slot. So I created a new design for a low profile PCI slot. Some differences in the design concept. I tried to keep it…
Update 26 May 2023: I was having issues with the filament runout sensor giving me false negatives. I realized tilting the filament sensor slightly resolves the intermittent detection, hence the new part name ending with “slanted”. Update…
Update 9 Apr 2023: Add enlarged straw hole version (+0.2mm diameter). I have not tested printing this, will do so and update if issues are observed. ***** I chanced upon this https://www.thingiverse.com/thing:5354341 and was impressed…
I find this solution ( https://www.thingiverse.com/thing:4892480 ) very good, however I like to be able to move the endstop further to the front, hence I shifted the holes closer to make it more compact. Also changed the mounting holes…
Update 5 Jun 23: Added a new base foot with pin, so that there is no need to print the pin separately. However, fitment might be an issue for some printers, do a test print before mass printing. ***** I love this simple modular design by…
Drain your cutlery, sponge, soap, and other possibilities with the same base drainer! Swap out the top tray and you are able to hold different items! If you look at the photo of the drainer top view and notice the layer lines, the lowest…
Designed my own cleaver knife sheath. Blade size is around 170 x 80 x 3mm. There is a catch at the end to prevent the sheath from slipping out, press to release. No supports required for me, though there are 55 deg overhangs and slight…
Remixed from Nightdre4mer 's design which I have used for over a year. Features Added a few angled surfaces (to allow water to flow off) Added more fillets Added a model with a cutout to add your own top design for your knives. (I kept it…
My previous design was too thin and caused the edges to crack and break apart. I have thickened the walls and made it slightly shorter while maintaining the overall width of 150mm. All these changes will improve structure rigidity. I have…
Update 17 May 2022: This current design start breaking apart at the edges. I will update the design to be stronger, stay tuned! I was looking for a smaller sized dustpan to get into narrower areas but could not find anything suitable. Had…
Warning! Clips may loosen over time due to heat creep depending on the temperatures and filament material used. Proceed with Caution! As you can tell from the photo, I have it mounted on a USB to M.2 interface. It was getting too hot to…
I found Wired1's solution https://www.thingiverse.com/thing:29572 most suitable for my use. Then the heatsink I ordered arrived and I wanted to add that in for an additional cooling effect. (FYI, the addition of a heatsink to the motor…
What started out as finding a solution to do a quick alignment of the dual Z motors accidentally became a way to prevent the nozzle from crashing too hard into the bed. If it doesn't crash too hard, the bed level will not be too skewed…
Update 6 May 2024: Added a 25mm version as another switch I bought is slimmer. This should work for TP Link metal case switches as well. The 5 port and 8 port network switches I bought have different heights and depths, and I want to use…
Nothing to hoot about, changed the inner diameter of the M4 screw cylinder for bigger head (7.2mm to 9.0mm), I have only M4 screws with washers attached on hand. Everything else is the same as felixna's design.…
Saw a few filament bin designs for other 3D printers but didn't see any for this model, so this is my take on how to collect unwanted filament bits easily. Able to put on either side of the bed frame. The green piece is PLA, and the…
I decided to do a remix instead of updating the earlier design because there are many new parts. Main focus is changing the mounting holes on the base part and the cable chain bracket on the other end to hold a 10x15mm cable chain instead…
A simple tissue box holder that hangs to the bed frame, for times when you do not feel like getting up from bed. Both parts can print without supports, (I have to tweak my settings to address the filament sag on the base part 😂) No…
Update 28 Feb 2023: Saw a better deal and updated the affiliate link. ***** Finally found a low cost USB powered LED clock that will sync time off the internet via Wi-Fi! But didn't have a case/holder. So I designed a simple snap on…
I have designed and printed it and pretty sure it will work for 120mm slim fan. Unfortunately 15mm thickness still not slim enough to put back the cover, I will add photos later if I can find slimmer fans cheaply, most likely 12mm thick…
Having a problem finding space to put your filament spool near your print head? Current filament spool holder not rolling smoothly? Try this design! Easy to print Using readily available standard hardware Easy to mount on 2020 extrusion…
A simple cover piece I designed for someone. Print in orientation as shown in the pictures with tree support and brim. The hole where the thumb screw goes through is designed for M3 0D4.5x3mm brass insert. ***** Want to buy me a coffee?…
Update 28 May 2024: I have remixed a V2 to rectify issues I encountered with this design. My initial desire to keep it slimmer resulted in the base of the ring being too near the center of gravity and making it roll over with a slight…
I was using derebbe 2x4010 design https://www.thingiverse.com/thing:2804665 after I upgraded to TMC drivers. I observed some issues, 2 nuts were interfering with the taller heatsinks, which I resolved by using 1 and hot glue the…
Update 30 Sep 2023: Minor changes with more interference catch to hold on better. Use this (V1) if the earlier version has problems latching onto the extrusion. Simple bracket to snap on hygrometer to any 2020 extrusion. Print in place…
Still have plenty of room for improvement, print with caution! I may or may not come back to improve on these flaws, but you are welcome to print and try it out. Most computer cases have a mounting for a fan at the bottom of the case.…
Changed my mailbox lock and realised it can only work 1 direction (key will only be released at counter clockwise position) which is against the direction of the previous lock. And there I go to do a design to clear the interference on…
Common problem with Oru Bay owners that their coaming latch will break. I measured off the existing part, increased the material volume at the weakest points. Same design applicable for both front and rear latch. Take note that because it…
Update 24 Feb 2024: Changed the joints to screw thread, does not wobble anymore. Removed earlier version. Organize your festive goodies! (Sometimes the snack you want is at the bottom of the stack. Three different container diameter size,…
Easy fix to an annoying problem. Somehow the printer has a 310x310 bed and the X and Y limit switches line up to the edges of the bed. We cannot utilize the full 300x300 bed size if 0,0 is at the edge of the bed. This is a failure of the…
These are all currently available results.
