Counting matching models…
The dovetail connections are a bit unintuitive but you sort of turn them into eachother until they lock. They seem to hold fine in this application if you get your tolerances correct. Clicks together with printed pins, no hardware or glue…
I made these to help someone that currently has to use crutches. They have a diameter of 20.3mm. I wasnt happy with the available designs because they come loose on their own to easily, so the clamp here actuallly uses a fine M12x1…
(I found a cheap used Shimpo wheel recently, so I didn't refine this system any further since i got rid of the Vevor one. it's still a bit janky but it does work.) Needs 8x M3x16 (or longer) socket head cap screws. Or really, any other M3…
Originally, I wanted a little container for loose tea, so I made one with "tea" written on it. (Pretty creative, right?) It's somewhat airtight and watertight because the threads are pretty fine; it's certainly better than nothing. Then I…
Needs 4x M3x10 (or longer) socket head cap screws and 1x M5x16 (or longer) hex head screw and M5 hex nut. The little gear on the side is clamped down with the M5 screw, which locks the jaws solidly in place. The jaws are a bit hard for…
Before I had a safety lever with a bolt hold open notch, I designed this so I could more easily clean my rifle without disassembling it. It's not super strong, so it's only for light work. It's very tight, at least in my AK, because I…
Just a simple model to clamp the Barrel of a Tikka T3x CTR in a vise without damaging the finish. Just to hold it in place while mounting a scope or something.
The mounting holes are 4x Ø4.2mm and 2x Ø6.5mm. The base has 3 variants: one for directly threading M3 machine screws into the plastic, one for M3 Ruthex threaded inserts, and one for gluing in M3 hex nuts. To assemble, you will need 2x…
Backstory: The two 3010 fans in my formbot kit were absolute garbage, the one for the hotend started rattling after 3 prints and the one for the electronics had an incredibly annoying loud pitch and barely moved any air. I had two gdstime…
These are all currently available results.
