Steam Deck Stand
A minimalistic stand for a Steam Deck, with a cutout for the air intake and small bumps that locate into the screw. Valve's official models of the deck were used to create this in Autodesk Fusion 360.
- Downloads
- 986
- Likes
- 88
- Rating
- 5
Counting matching models…
A minimalistic stand for a Steam Deck, with a cutout for the air intake and small bumps that locate into the screw. Valve's official models of the deck were used to create this in Autodesk Fusion 360.
This is a small cylindrical container with a screw cap that can be used to store all sorts of things in your pocket or bag. You can store something about 15 mm in diameter and 100 mm in length. There is a small cone shape at the bottom to…
I printed the original but it didn't fit due to difficulty supporting the part without the supports fusing. PETG is necessary for this model and doesn't work well with supports so I decided to make a design that didn't need supports. By…
This raises the controller when rested on the knee and also tilts it forward a bit more. This makes it more erganomic to play games like VTOL VR, particularly when pitching up or down. I printed this with 0.2 mm layers with tree supports…
Replaced downward fillets with chamfers and filleted some sharp edges to improve DFM. There is a suppressed feature in the f3d file which contains a patch for the logo. I've only included the right hand version, you can mirror the part…
You can use this to make an adapter to join two pipes together. You can define many parameters so it is easy to get right: // Basic Parameters First_pipe_outer_diameter = 30; First_pipe_inner_diameter = 28; Second_pipe_outer_diameter =…
These will allow you to level your ender 3 and have it keep its level by locking the bed levelling knobs in increments. You need 4 of each model. One fits to the bed frame, the other fits to the bed levelling knobs. The thread pitch of…
I added a hole for thread to the original 3D scan of the witcher by Bravach. Instructions Printed using white PLA in a Velleman Vertex K8400. Sliced using CuraEngine at 0.2mm layer height and 10% infill. I also added a circular hole for a…
A spool clip for 1.75mm Velleman filament spools. It is 10mm thick by default, but you can scale the Z dimension to change this Instructions Print these at 0.2mm layer height. Use a low infill, if any, as this will keep them flexible…
An ice scraper with a blade inspired by a snow plough. It's made of 2 bodies so a fuzzy skin can be added to the handle. Printing parameters: Print from the tip of the handle using a large brim I used clear PETG because it is tough I…
A series of prints used to determine the dimensional error of your parts as a function of length. Each part has an inside and outside point to measure from with vernier calipers, which may reveal other issues with printing. These can be…
The instructions suggest using a box cutter to cut these blinds to width, but on a test cut I quickly found this would be difficult. Instead, I used a kitchenknife and this printed guide to make it easier to cut straight. This was…
These are all currently available results.