Counting matching models…
Those are great clamps, i'm using it everytime i use my CNC. Enjoy :) Edit: Added a V2 140mm clamp as requested Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: sunlu PLA…
I needed an adapter to plug this sanding machine to my vaccum (35 mm). It was a little bit tricky to adjust it perfectly. It fit just a little tight to the machine so it won't move when we use it. It's not the best design i've ever made…
This is a dust shoe in 2 parts, i use it on my openbuilds workbee but it will fit to any 65mm router. The vacuum pipe diameter is 35mm. The top part will be attached to a 65 mm router (katsu or makita) with 4mm screw/bolt . The bottom one…
You'll need: A 330mm wheel - https://www.aliexpress.com/item/4000417198540.html?spm=a2g0s.9042311.0.0.27424c4dU2Z6Ag M3 threaded inserts 4.2x5mm - https://www.aliexpress.com/item/4000513304304.html?spm=a2g0s.9042311.0.0.27424c4dhffj8O M3…
It's just a support for my airbrush compressor. It might fit to other compressor as its generic. Category: Art Tools
This steering wheel is a remix from this https://www.thingiverse.com/thing:4058270 I designed almost every parts in Fusion 360, the only files used from the parent are the handles. The plate can be 3D printed but on my design it was a…
I changed the battery of my TT02B and the holder didn't fit with the new lipo battery. So i designed a new one. I added a vesion with an a buzzer support (battery tester) so it will buzz when the tension si too low. Print Settings Printer…
My NICE remote didn't came with a wall supoort so i made one :)
There are 2 designs, they both fit great to a moleskine notebook. Your can print it using PLA/PETG and even TPU (that's the one i'm using right now). If you need specific version just ask me :)
I needed to adapt the drag chain mount of workbee CNC machine for my drag chain (18x37). I reinforced the mount because the one i previsously had broke too easely. I can send you yhe orginal fusion objet if you want. Print Settings…
I made a Simucube V1 with a small MIGE so i nedded a case. It will fit a Granite device Simucube (with the IONI pro board) and a Mean Well PSU 450W - SE-450-48…
Mount for your thurstmaster warthog joystick on you 45x45 simrig. For the vertical version, the axes must have been threaded as shown on the picture. Then you put the mount with srews. I added a cover so the joystick's electronic won't be…
t's just a support for my airbrush compressor. It might fit to other compressor as its generic. It fits perfectly (i think) for the "NEO for IWATA" airbrush. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
The original's one are too big so i made a small version. Should be printed in PETG or ABS as PLA is not stong enough. I only had ablue PETG, I'll buy a new one in black... Enjoy. Print Settings Printer Brand: Creality Printer: CR-10…
This is a remix of the case from Leo_N but i made it completly from scatch... (cause editing a stl file is a pain in the a..) It's designed to be attached to the side of the AM8 frame. I added 3 versions of the case (with a SD card…
Embout de plinthe de cuisine Ikea method
This is an update of my previous design. After 2 years of practice, this object needed few tweaks :) Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 100% Notes: This…
I made this for my personal use. There is 2 versions : - 50.5 mm is for standard funwheel with centerplate. - 52.5mm is for funwheel with centerplate and 2mm railguards It works quite well in my car trunk :) Warning: it won't fit with the…
An extension of this thing ( https://www.prusaprinters.org/prints/73985-thurstmaster-warthog-joystick-mount-for-45x45-90x4 ) but now for the trottle. Works fine for me... Enjoy :) Print Settings Printer Brand: Creality Printer: CR-10…
Just a case for my DAC using an old Rpi1 B+ and A DAC (Sabre ES9023) Everything works fine with Rune Audio... You would use a few nylon screws to attach the electronic to the support. Enjoy :) Print Settings Printer Brand: Ultimaker…
You‘ll need 4 insert for this design (OD 4.6x5) and 4 3mm screws.
I wanted to set firmly the oculus sensor to my sim rig (profile 45x45)... Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I used brim Category: Games
So this is a remix of the fabulous Alted version for the MPCNC now designed for the openbuilds frames. It use the flexibility of the 2 arms to stick the pen/cutter to the spoilerboard and compensate its irregularities. You will need 2 M5…
These are all currently available results.
