Counting matching models…
Step 1: Print the base and 2 nuts and bolts. I recommend printing with support (for under the pci slot). Try to press fit the bolts into the hex holes in locations that will best support your GPU. If you can't get it, try to keep it…
I needed a new motherboard tray so I designed one. The dimensions are set to the size of my Asus TUF Gaming B550M-Plus WiFi motherboard. To use this, you have to do the spring mod, so that your case opens and closes by pushing in the rear…
I made this vent to allow more airflow for my Apple Powermac G4 case. I'm running a Ryzen 9 3950x with a 280mm AIO. It makes the case appear as if someone had just hit the eject button. I used a honeycomb design for the vent, reminiscent…
I made this vent to match the CD drive vent that I made for more case airflow. This zip drive vent is held in place by 2 M3.5 screws, I happened to have m3.5x8 on hand but shorter should work no problem. I have removed my drive bays to…
I build this mount to hold my PiKVM, which is based on a Pi Zero 2W, the Geekworm C779 camera, and 3d printed case designed by @Luke_330998 at the following url: https://www.printables.com/model/547372-pikvm-zero-case He did a fantastic…
I made this for my Mackie 1402-VLZ. I widened the original from 24mm to 25mm and added a bump out on the underside to keep it centered in place between the faders.
These are all currently available results.
