Counting matching models…
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
Simple design, super-snug fit. If you have access to multicolor printing, then add filament swap after first layer which is at 0.2mm. Meant to be printed at 0.2mm layer height with up to 0.6mm layer width. 14.09.2025 - added version with…
Pattern depth is 1mm, dual-colour print is possible with different base colour and contrasting top colour. Use auto-orient for printability. Do not print it out of PLA due to the heat after driving and the sun. ABS/ASA are good options,…
Made this because of my custom length hotend. I did not feel like cutting neither my CNC toolhead mount nor the Eddy itself, so I made an adjustable mount that utilizes Cartographer mounting hardware. You need some M3 bolts, two out of…
Panels are made for 5mm thick Polycarbonate panel for frameless mounting onto 2020 extrusions. Spacing for the hinges is actually 5.5mm to make room for cloth tape for vibration noise dampening and extra sealing. Rotation should be at…
Only requirement is to print it out of a material that is UV resistant. No supports needed, regular settings for any functional print. It's just very slightly oversized to make it friction-fit with the layer lines but doesnt really matter…
So here it is - my original design to fit two or four spools into Flying Bear Reborn 2 with the option to lock the spools in place and having the material dry while I'm printing other stuff. Also as I'm doing a frame conversion to the…
It's still in testing. So far so good, just some minor gripes but nothing that makes the toolhead not perform. This version is made for M3x8 flatheads. You need to drill and tap the radiator for M3 bolts. Reasoning behind this is that the…
As an owner of now over 12 year old PC case named Silverstone Raven RV03 I had this big issue with it that there was just no way to properly mount any watercooling radiators into it. So, I ditched the external radiator and decided to go…
A basic model of 10x35x4mm. I scaled mine twice the size on X and Y, inserted text with depth of 1mm and paused at the beginning of the layer the text printing starts to swap out material.
01.2025 - had some issues with the back-to-front version, it melted at higher temps. Added a new model with duct tips moved 5mm away from the nozzle without the louvred tips aka got them more solid aswell. Currently testing and…
The original fan mounts of RV03 are whack - they are put in an offset and overall in a weird way. So, as I moved forward on installing watercooling into this case I designed this bracket that is held in place with gravity and should you…
ATTENTION - cooling fan changes coming soon. Also increased the depth of the current fan mounts in case you want to swap them out thus there's enough room for a printed adapter sheet for a smaller version. Might actually ditch the…
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
A BentoBox mod for 9733 blower fan that has stronger static pressure and higher airflow. It is designed to create a vacuum in the tower sucking the air from top to bottom. The idea was to make the intake sound quieter and keep the blower…
I upgraded my Trident corner extrusions from 2020 to 4040s and that rendered the original printed pieces unusable. New parts needed are the hinges and latch hinges, however to make the mounting more accurate and a bit smoother based on my…
First, look the video Extrusion Quality - Mystery issue resolved ! (youtube.com) I watched it myself after I was bored and decided to give it a go on my HGX Lite extruder that I have used for about 500-600 hours now. Extruder is about 9…
Info from the original author: Uses a M3x25 instead of the default pin. You'll also need a M5x16 + nut and 2x M5x10 + 2x extrusion nuts. Mounted in the rear right corner for the highest distance possible.
I grew impatient after I received my RIDGA set but the pack of idlers were not delivered yet so I found some bearings from the drawer, measured it and started remodeling the idler arm to fit the bearing so I can already start testing the…
Moving from 2209 driver setup to 5160Plus I was unable to get my sensorless XY homing to work like it was with 2209s. Decided to buy clicky switches with a bit longer metal spring so I can actually use my XY joint as endstop switch bump.…
Print it with strong plastic, preferrably at least PETG but not with carbon or glass filler, Voron print settings. Use 3mm drillbit, I actually got it done with wood drillbit as the sharp tip helped to better hold the drill in place. Use…
I had loads of above Aliexpress-average quality Creality's original 4010 blower fans that I decided to fit to A4T toolhead, however it was designed for smaller hubbed versions. I decided to give it a go and just delete some of the…
Beefier version of the slotted PCI-E slot cover.
As the original, this remix is inspired by: Stealing Noctua's quiet airflow mod Compared to original design, this is more aerodynamic and optimized for radiators. Use auto-orient to get better face on the print bed if you're not sure. I…
01.2025 update - after testing 3010 version for a while I was getting heatcreep issues with PETG with higher amount of retractions. After some consideration I decided to go even smaller and make a better focused and enclosed duct with…
I migrated from A4T toolhead due to crappy fans I had (sleeve bearing was shot after 50 hours of 70C chamber printing on one fan). I got those fans for free, so I did not cry much nor I was gonna order fancy ones from USA from Fabreeko…
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
Prints without supports, orientation should be correct in the file. Infill above 30%, 4 or more layers and walls. The more the better. Holes for panels are M5 size, holes for 2020 attachment are M3.
This is dumb. 95A TPU at 41mm3/s and I bet it could do even more, but for me its enough lol. Look it at WristWatch extruder with MK8 + smooth idler pushing 95A TPU at 41mm3/s at 250C #3dprinting It is compatible with IDGA gearsets but…
Literally added some extra mass so it would benefit more from extra walls with some more exotic material like PPA-CF. I noticed the original design still flopped around a bit even when printed from PC-PBT-GF20, but this one seems visibly…
Redesigned extruder adapter (Sherpa Mini pattern), redesigned hotend mount (single piece vs two pieces), Beacon probe support. Stuff is being tested, BOM and guides will be added sometimes in the future.
Yes, with a Voron logo.
01.07.2024 - Uploaded a stiffer and thinner model as I wanted to horizontally mount the turbine, at least for testing purposes. Photos of this will be uploaded once it's installed as planned. Couldn't find an internal mount as I do not…
Printed these bad boys out of PCTG. Nice and strong, yet flexible. Filed the flat side so it'd be more rough and has better adhestion with the glue.
Finally got my hands on a Goliath hotend, but soon after I realized that: - original M2.5x5.5 bolts are soft as and the hex slot stripped super easily and I could not get them out from the original printed part anyways, so I just had…
M3x10 bolts and T-nuts for mounting. meant for 22mm OD/18mm ID CPAP hose. Print as oriented, use supports. 4 walls, 20% infill and well-tuned part cooling needed.
Filleted version looks nice, but chamfered even more so.
I rebuilt my Flying Bear Reborn 2 into a very custom Voron Trident 350. At some point it was time to replace the old dual-Z with the Trident's triple. To make thing fit and line up properly, I worked out these modified Z-stepper plates.…
What the title says. Needed hardware is M2.5 or M3 bolts that are 5-6mm long, just smash them in there.
Printed all parts out of PETG, usual Voron settings, no supports needed. BOM: M3x25 bolt, two M3x8 bolts for OptoTap, two M2.5s for switch should you want to use it, one BMG gear (preferrably idler as the one with grub scew can be used…
A full redesign of my earlier 2020 CPAP hose bridge ( 2020 profile CPAP slim bridge by minilogique | Download free STL model | Printables.com ). Print as is, will need relatively well tuned supports, otherwise you just have to do some…
Needed a model for 2x5015 instead of 9733. Made to work with parts from the 9733 BentoBox mod below.
Toolhead designed exclusively around CNC TAP and Goliath (CHC XL, Goliath Lite etc) hotend. Monolithic design, proven hotend radiator cooling, proven part-cooling. Can support Peopoly Lancer Long IF you cut the radiator down in size and…
I did not find a design to replace the broken rear hinge of the Logitech C270 webcam. Mine broke so I made a new hinge that's meant to superglued on. I used an STP file of another maker ( Voron Trident C270 Mount by Ibot_3D | Download…
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer.
Print as-is, no supports needed. 4-5 walls is recommended, do not use carbon-fibre filled filaments for electrical safety reasons, glass-fibre is good to go. Fuzzy skin makes it look as mint or even better than just printing it with…
Print it with like 7-8 walls, basically make it solid. Use best filament you have that does not creep and takes most heat. It might still bend after a while, but at least it will still hold grip before it touches the extruder body. No…
As my previous 2-channel filament splitter broke and I also needed to run filament from external dryer, I made this remix to fit my personal rig - Voron Trident with 4040/20 cornerposts so it has extra room behind the XY rear horisontal…
⚠ IT IS STILL IN TESTING PHASE! Currently tested COM is 2mm front of the rail and 3mm above the rail's centerline with the files and calculations I have access to (tested with WW MK8 CAD). Printed toolhead with assembled WW MK8 without…
I had success with my MK8 version of WristWatch extruder so I figured having two of these in one extruder will be even better. Sherpa Crew Mini with MK8 gearsets pulling soft matte PLA at 220C with some extra friction @60mm3/s BOM follows…
These are all currently available results.
