Counting matching models…
This cap will work with all rotring 600 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip. You…
I got this phone as my daily driver as I really like the screen and phone jack. Although the phone got crazy fast charging, I still prefer wireless charging as I have it everywhere in my house. Hence, I design this case to fit a wireless…
This cap will work with all Uni-ball Kurutoga () mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the…
Since most of the AM5 motherboard is quiet bad at dealing with dual rank high speed DDR5 RAMs running on 4 slots, I made this dust cover to protect the unused memory slots. I did not test it with DDR4 memory slots, but I made the key gap…
I made this microphone stand that can hold 3 dynamic handheld microphones. It should be compatible with most common microphone sizes. I intentionally made the gap between each microphone large enough so you can leave the pop filter…
This cap will work with all Staedtler 925-25 and 925/35 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with…
This cap will work with all Pentel PGx and P20x mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.
This is the dust cover for PCI-e X16 slot. Please use soft material like TPU to print it, otherwise you might risk to damage the slot.
This cap will work with all Pentel SMASH mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.
As my new bike is not trek, it only comes with a garmin+gopro mount for the handlebar. And since it is an carbon aero handlebar, I also cannot use the round handlebar mount comes with the light. Hence, I design the mount by referencing…
I am a beginner, and I made this tray to fit only my tools. Hence the slots might not be that universal. Feel free to use it as a template and remix the tool slots yourself. I printed it with Bambu ABS filament. I set the walls to 6 and…
Nvidia just discontinue physX and I need my old GPU to run my old games. However, the PCI-E slot is at the wrong place on my MB. Hence I will need to raise the GPU above the mother board, and use soft ribbon cable under neath to make it…
This cap will work with all Pentel PG100x mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip. You…
This cap will work with all Pilot S20 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip. You…
This try is just slightly bigger than a SIM card, but will provide sufficient protections to both the SIM card and its toolkit.
My original strap broke after only 2 years of summer usage. It is almost impossible to find replace for it, so I decided to make my own based on the original design. You will need to print it with very flexible material, otherwise it will…
I am very new to 3D designs, but I have test print this, and everything seems to fit just fine. I am using 0.4 nozzle Bambu Lab X1 Carbon with Bambu PLA filament. I use 0.16mm layer height to add a bit of precision, while the rest of the…
This is a motherboard under glow mounting kit for ARGB LED strips. It should fit all standard ATX motherboard size. I would recommended to print the cover with translucent PETG. Please use the second picture for the installation guide.…
I do not want to clip this pump on my frame as it looks very ugly. Hence I will not be able to fix the CO2 cartridge at the end of the pump as it is too long for my saddle bag. This clip will help to organized the saddle bad better. I…
This cap will work with all Pilot S30 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip. You…
This cap will work with all FaberCastell TK-Fine Vario L mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with…
I took the stand idea from Rex's own razor stand and made my own twist to it. I have added an container for blades. I also added water drains at the bottom of the razor stand to minimize the water stain. This is also a low profile stand…
Since I shave less than twice a week, it is much better to store my razor disassembled to prevent rust build up on the razor blade. This is the a very low profile stand that took up less space than the factory stand come with Henson. I…
I made this for people that need replacement part for their Pilot Dr. Grip Ballpoint pens. It should work with most of the models as long as they take BRFN-30 or BRFN-10 refills. I try to make it exactly the same as the original model, so…
As the InWin case is very limited in space, I have to be very creative for mounting additional radiators for the CPU. I assume you can change the base plate to fit whatever mounting standard you want, but I made it for the InWin S-frame…
Since I have many fountain pens, I try to convert some of them into ballpoint so I can carry then on a plane. This model is made to fit an Pilot BRFN-30 Refill, and will be compatible to all Pilot Capless (Vanishing point) style fountain…
As my 750ml fidlock bottle is too big for the original bottle cage mount of my bike, I designed the plate to shift the mounting point higher so the two bottle will not interfering with each other. I will recommend the 9.3mm version as it…
I made this to transfer my steering wheel buttons on to the new quick release system. As the car only allow you to use the steering wheel button to control the information screen on the car, it is essential for me to keep it. My car is a…
This is a refill sharpener used to convert URM85N refill into a BRFN-30 compatible refill. "S" slot is used for the ink tube, while "T" slot is used for the tip. Here is the list of material you will need for this: M2.5 x 6 screws (2)…
This cap will work with all Platinum MSD1500B mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
This cap will work with all Ohto PM150x and MS01 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the…
This cap will work with all Staedtler 925-77 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
Since the bike have a special shape for the steering tube mount, and the spacer is hollow, I made a cover for it so the universal steering tube mount will not look out of place. I have also made a model for the original spacer in case you…
This cap will work with all Platinum ProUse 171 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
I am not sure how useful this is as it only works for one very specific mixer:…
Since I am facing rust issue with my Rex razor, especially for the head and the blades, I decided to dry the razor after each shave. This razor holder allow me to store each piece separately so it can dry faster. It also help me to load…
I have remix the original pen holder design by @deal_industries. You can find the original work at: https://www.printables.com/model/239301-stylized-pen-holder It has a base that will fit the turn table found at…
As a beginner, I tend to use mild razor for the ATG while use the more aggressive slant razor for the rest. Hence, I need a place to hold the razors while I am switching in between them. This tray will also hold the rest of my shaving…
This organizer can fit 3 large spice container. It can also been slotted together to create a longer version as you wish. The handler is also optional if you have tight fit. Please let me know if there any ideas for improvement. I print…
This is a mount adapter for Aquacomputer ULTITUBE D5 that fit the inwin S-frame case. I made it out of ABS, so if you are printing with other material, you might need to test print it to figure out the proper scale.
Initially I thought this will just be a plate with few screw holes, but my roof soffit panel is extra long (360mm to be exact), so I cannot fit it with my printer. Given the camera is quite heavy, and I want some flexibility to adjust the…
This is an adapter that will convert the Bontrager computer mount to a Garmin computer mount. I use the original computer mount as the design reference, so it should work with any bontrager computer. I will suggest to use PETG or ABS for…
This is a razor drying stand for the Focus Tritok Flattop razor. I got the stainless steel version (R61), but it should also work with the aluminum version (R51). It also contain a blade holder for drying the blade after use as well.
I made a divider that fit into the original Genesis G80 centre storage box shelf. It will hold coins and cards separately and keep them rattling around while driving.
I made few caps cross different lines of Pentel Orzen pencils, please check the name of the model file for more details. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this…
As this is my first expensive bike, so I decide to put an gps tracker inside the frame. I repurposed the access port for the old Shimano DI2 system and integrate the tracker mount underneath it. I have test is with some riding, it does…
I made this dust cover for the Heatkiller 360L radiator. Initially, The goal is to match the colour profile of my PC build, as well as provide dust cover for the fan intake. I have tried to use the makerlab to transfer some 2D image onto…
As the Genesis G80 model before the 2025 refresh has an additional space in the centre storage compartment, I design an tissue box for it. The goal is to keep it neat and easy to pull out.
This is inspired by the “hidethebell” design which put the bell under the regular Garmin/Wahoo computer mount. The screw cutout for this plate will work for the new MOST bike computer mount. As the computer mount comes with additional…
I tested it on 2013 Honda Civic sedan, so I assume it will work for all 9th gen cars. This will all your seat belt buckle to move around like the stock one even if you use after market harness screws.
As I have the Pro version of the pen, it has dual tips, and the other tip does not comes with any caps, hence I come up with this one. I do not think 0.4mm nozzle will be cable to print the thread correctly, but as PLA is soft enough, it…
I want to down size my saddle bag, but still want to keep 25g co2 cartridges. Given the saddle bag I got is hard shell with quick release, it does not come with external strap for the CO2 cartridges. Therefore, the only option for me is…
These are all currently available results.
