Counting matching models…
I've used some of the other risers, but they didn't flow with the Q1 aesthetic. So I rounded things out a bit and made it snap-together. The corner pieces have built in support for printing. You will need 2 of each corner and 4 of the…
Say hello to the brightest LED upgrade for your Q1. Pick up some 8mm wide 24v LED strip LED's ( for example ) , print the parts, install and 2 wires later, you are blinded. I printed in PC-ABS blend to handle the constant chamber heat.…
I found the 12's to be a bit too long back-to-back for some locations. They print super fast. Use your material of choice, I use ABS for my builds. Use the extrusion factor to adjust the fit as needed. Don't be afraid or too proud to use…
I've insulated my printer and found that the electronics area compromised the heated chamber. This divider will help to separate the electronics from the chamber air. Will not make it air-tight, but add a blockage to the convection path.
I liked the V2.4 top hat mod, and decided to make one for the Micron as well. This is designed for the 180 version, I will likely also add the 120 and 160 versions soon. These are designed to print flat and will fit on the Micron+ build…
The print orientation is the best I found to print. Use tree support with 45 degree threshold. Use PETG at the least, I suggest ABS if you can print it.
The least intrusive slot cover I've come across. These are somewhat fragile, but I was able to install them successfully even printing them flat, in the weakest config. Will not drop into the slot. Print flat with .2 layers and .4 line…
If you don't use the aux cooling fan, re-purpose it to filter the enclosure. Carefully remove the top duct in 2 parts. Spin it 90 degrees and add the printed parts. The filter box will need an M3 heatset. The lid will need an M3x12 screw.…
Rear panel insert for bowden tube connectors. I use 1 on each side printed with 4 walls, 4 top and bottom, 20% infill. The walls are important to get good threads. Hex on the inside where they should be.
2/4/24: Added low profile version. About 2mm shorter and sunk BHCS down 1.5mm. To make for easier multicolor printing across all slicers. Really sets off the build!
Add-on to this great PFA mod! When you don't have a black frame, the foam tape stands out like crazy. Use the corners from Github. These sides will fit a Micron+. Step files included so you can modify the length to suit your build. Print…
I liked the V2.4 top hat mod, and decided to make one for the Micron as well. This was originally designed for the 180 version, so I modified it to fit the 120. If you are interested in the mini-fridge door version, drop me a comment.…
These are all currently available results.
