Counting matching models…
I am told there is no standard for paint pole threads, but this fits the two paint poles and the broom handle that I have. This is just a threaded cylinder to use as a starting point for your model. I am including the .stl file and the…
I took measurements from a Bauer Li-Ion battery and I use this to hold my battery powered vacuum on the wall and out of the way. Someone more ambitious may use this as a start to a battery adapter - I have done the “Bauer" side of things…
Time Lapse video link: This is NOT recommended as a first print. Take a look around at the several other remixes and decide which one you want to tackle. There is a lot of excellent information in all of them. I have built one of these…
I have seen a few other base plates, but they do not account for the ability to use brass inserts - this one does. There is nothing fancy about this - just a copy of the original PC base plate.
This is an aerator - if you're lucky this will cool your pool down a few degrees and you won't need to get a chiller. This works great for our pool and it knocks down the temperature about 5 degrees F which gets it back in the warm, but…
The plastic base for our inflatable Grinch with Max cracked in several pieces and no longer held air, nor properly acted as a stable base. I removed each piece, hot-glued them together and took measurements. This has to be printed on an…
This is a two piece (my printer is not big enough to print a single piece this large) replacement for a router base plate. It does NOT serve as a router base plate - just an insert to make the table top a reasonably smooth surface. I made…
I wanted some switch covers for my Decora style light switches - I have some wi-fi lighting and I wanted the circuit to always stay on. The irritating thing about covers is that when you need to cycle the power to add a wi-fi component,…
I have a Kinetico K5 drinking water system and changing the filter is not too tough, except for the very last one. I cannot get my ham hands in the assembly far enough to get a decent grip on the front filter. So, after I finally got it…
These gears will replace the gears on the A&A pop-up valve assembly. Please watch the video. I do NOT recommend the printed gears for positions 4 & 5 - you should swap those positions as the gears will last longer. These will work and…
I needed to trim some expanding foam that expanded much more than I thought it would. The instructions on the can say to use a serrated knife. I was going to use our bread knife, but I was given "the look" so I decided to print one. It…
This is a holder for a Ryobi Stud Finder - it works with the standard original parts of the Honeycomb Wall System
We had a cheap wire caddie that fell apart and I finally 3D printed one to take its place. I used M2x3 melt-in inserts and M2 screws to hold the sides on. I used clear packing tape to hold the dovetail halves together - my printer is not…
This is a fixed angle Simplisafe indoor camera mount for use in a Lack, or similar, enclosure. The holes accept #8x1-¼" wood screws and find purchase in a Lack table just fine. I am including pictures of the mount installed as well as the…
My CVS and Kroger Plus/Fry's loyalty cards were getting to be unreadable and I was on my second for each one. I found a barcode generator at https://barcode-maker.com/ which lets you pick from MANY different types of barcodes. CVS is…
Print one base, one ruler (if desired), one fly - to push the bow material together, one end cap, 2 BladeUR-LL, 2 BladeUL-LR and assemble. Print in the orientation shown in the 3MF file. Use 4-M3x10 screws to hold everything together and…
These are all currently available results.
