Counting matching models…
only normal size can mount 120mm fan if you put switch wider than standard 10 inch (around 220mm) switch will place deeper than 20mm, you need to put screw in 120mm fan hole to lock switch in place 120mm fan screw or M4 longer than 6mm is…
hole size M3 (spare HDD SSD mounting screws mostly come with motherboard) My print settings layer height: 0.2 wall: 3 infill: 15% If you enjoy my work, please consider support at link in profile.
have 3 type patch panel patch panel NUC - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone (14.5mm) patch panel with label - read below My…
3U too big for small bedsize 1U onlyfan version - if you just want to mount fan or have small bedsize mod version please check Mods folder in 10 inch Rack Front Cover for cable hook If you enjoy my work, please consider support at link in…
3mm blank i use to manage cable with PVC cable tray plate mod come with small hook (R6mm) check in mods folder or make something to hook check diy folder If you enjoy my work, please consider support at link in profile.
remix from 6.5 inch rack External 2.5 Hard Disk Cage for 10 inch 1U still mainly design for external hard disk so i keep old tray to use in this one have space left and i dont want it waste i create half size tray above half size tray…
USW Flex 2.5G-8-POE (212.9 x 99.4 x 33.5 mm) USW Flex 2.5G-8 (212.9 x 76 x 33.5 mm) both model share same wide and height, so it can use same rack for USW Flex 2.5G-8 just print adapter (small green one in image) and you can use M3 screw…
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk My print settings layer height: 0.2 wall: 3 infill: 15% If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change…
It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…
v1 vs v2 different read in change log below you need to print 1-3 to use as drawers 4-5 is optional rack shelf (rack mount) rack shelf backplate drawer drawer insert rack shelf top backplate print separate from rack shelf so you can turn…
remix from 6.5 inch rack If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change name 10 inch USW Flex 2.5G-5 with Patch Panel A > 10 inch USW Flex 2.5G-5 right label 10 inch USW Flex 2.5G-5 with…
Support Skadis design to use with 3D printable rack | 10-inch and 6-inch Support Rack Shelf share weight from rack 1u above, use with support beam not necessary but why not ? (150, 200 250use same model) for Skadis Handles and Footer…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection this shelf cannot put into RackMate TT i want to put external hard disk in rack but i have some limitation 2U must fit Seagate One Touch (115.3 x 80 x 20.9) so it…
at first i decide to make for 80mm fan only in 2U then i try to alter grill till it can mount most common pc case fan size, some fan can mount only 2 hole in horizontal but 80mm can do all 4 check table below fan size (mm) Type A Type B…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection this model have 3 type patch panel patch panel with label - check 10 inch Keystone Patch Panel for more info patch panel NUC - some NUC higher than 1U and i dont…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection design to use with 3D printable rack | 10-inch and 6-inch rack frame but original rack part dont have hole, its require at lest 1 of my skadis remix in list (2…
remix from 6.5 inch rack ZimaBlade by request, more info read in remix source i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection this shelf cannot put into RackMate TT 200mm design to use with 10 inch rack frame 154mm depth same as 10 inch Rack Shelf Regular 150mm design to use with 6 inch…
Remix from 10 inch rack Unifi USW Flex Mini 6.5 inch rack Raspberry Pi more info and front plate for rpi check in source link i dont have device to test this print, use at your own risk My print settings layer height: 0.2 wall: 3 infill:…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection rack mount design by use 3D Model Resources for IceWhale Products as reference and i dont have device to test this print, use at your own risk Rack mount use M3…
sample image from 6.5 inch rack design to use with 3D printable rack | 10-inch and 6-inch rack frame but original rack part dont have hole, its require at lest 1 of my skadis remix in list (2 each) to mount 3D printable rack - Handles and…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection 3U If you enjoy my work, please consider support at link in profile.
NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone (14.5mm) can mount on both side no support need (need cleanup spaghetti a…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection this shelf cannot put into RackMate TT it require to use L-shape connector for usb-c, display port (14mm or lower) for right side raspberry pi i dont have device…
this shelf is start design before an announcement of RackMate TT so some of it is wider than 130mm like external harddisk cage (133mm), most of it work or check 6.5 inch rack fit Rackmate TT for all model that work with RackMate TT Why…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection rack mount design by use 3D Model from Jet KVM website as reference and i dont have device to test this print, use at your own risk My print settings layer height:…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone…
this shelf cannot put into RackMate TT Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection you need to print 1-3 to use as drawers 4-5 is optional rack shelf (rack mount) rack shelf backplate drawer drawer insert…
same as 10 inch rack Front Panel Universal Fan Mount read compatible fan size at 10 inch rack Front Panel Universal Fan Mount (limit 120mm fan)
Skadis Version design for Ikea Skadis T-nut or drill direct to to whatever you want to stick it design to fit a little bit tight if you want more tight just stick something between charger and holder My print settings layer height: 0.2…
These are all currently available results.
