Counting matching models…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
Strip PET Bottle cutter. Two width version: 8 and 10mm Four width version: 4, 6, 8 and 10mm Added custom request model with heights of 1,3,5,7,9mm Enjoy Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
Four Triangles Keys 9, 10, 11 and 12mm Hollow triangle Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: PLA Category: Hand Tools
Three paper or cardboard embosser of Butterflies silhouettes Updated: Added Big Butterfly and rotated models Printed in one piece. Hinge system Tip: use Fine Sandpaper for more clean embossing Print setting: 0.2 Layer 20% Infill Not…
Tool for embossing paper and cardboard in 30 and 60 mm widths Updated 60mm version without screws Updated: Added step files of roller blanks rollers for who want their own designs 60mm suitable for business card Models with little hearts…
Two rings Toroid coil winder machine Slider version here: https://www.printables.com/model/1296274-slider-type-toroidal-winder Compact version with electronics control schematic: (electronics compatible with this)…
Model with or without additional articulated tail Update: Added redesign model and stand version2 To print in place without supports Ball joints: head, wings and tail Include stand Tip: Once printed, to loosen each joint first moves…
Compact toroidal winder machine Slider version here: https://www.printables.com/model/1296274-slider-type-toroidal-winder This is a functional equipment, watch videos: Updated: New video operation and handling Short video test working…
Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…
Embosser for paper and cardboard with hearts, Rose, Bird, Hummingbird, Swallow, Seagull, Flamingo, Dolphin, Seahorse, Angelfish, Cheetah, Clover, Infinity symbol Try version V2 with 0.3mm clearance if the hinge sticks. Hinge system…
Tool for Clips Remover. Panel automotive doors tool I use 0.6 Nozzle for stronger part Print Settings Printer: FLSUN Q5 Rafts: No Supports: Yes Resolution: 0.3 Infill: 100% Filament: any PLA870 any Category: Hand Tools
Butterfly and Dragonfly silhouette Aprox. 100x70mm dragonfly and 75x65mm Butterfly (1mm height). Scale it to your preference. Print setting: 0.2 Layer 20% Infill Not Supports PLA
Four paper or cardboard embosser of Cats silhouettes Printed in one piece. Hinge system Tip: use Fine Sandpaper for more clean embossing Enjoy Print setting: 0.2 Layer 20% Infill Not Supports PLA
Duct Air Intake Fan Horn or Turbine for Elegoo Centauri Carbon Initially this model was purely aesthetic and intention that it affected as little as possible cooling fan capacity. However, after tests and designs these ducts improve…
Adapter for Toyota Yaris Cross. To install a tweeter in the triangle plastic cover front doors without damaging the original. The design is for the left door. Mirror on the Y axis for the right door. Three versions, one ready to mount the…
Corrugator for paper or aluminium foil. Used for diy Ribbon Microphones Use two M4 hex Socket bolts 40mm long and nut. One is stuck inside the crank the bushing makes joint with cog Print Settings Printer: FLSUN Q5 Rafts: No Supports: No…
Bed Level Test for FLSUN Super Racer and Q5 with or without label 240mm external diameter for SR 180mm external diameter for Q5 0.6mm thick. Scale Z if you want other thickness
Attachable letters for Game Board or Educational Enjoy Print setting: 0.2 Layer 20% Infill 2wall 2Bottom 4Top PLA
Enclosure for FLSUN SR with acrylic panels with door aperture. Update!! Active Heat Chamber for enclosure here : https://www.printables.com/model/1193992-flsun-sr-active-mini-chamber-heater For Print larges parts undivided pieces is…
Archery Pin Arrow Nock Added version 2 stronger Tip: Adjust width outer wall to best fit Print settings: Layer 0.16 Walls 3 can be printed vertically but more resistant horizontally advisable brim no supports Best PTEG or Nylon
Adapter to install Bambu H2D Hotend Heating assembly on Elegoo Centauri Carbon for quick change Nozzle. The overall height has been intentionally shortened by a few tenths of millimeter for safety reasons related to the cleaning area. A…
One ring with slider type This toroid winder accepts smaller cores than my two-ring winders and simplifies the number of rings and bearings. Update : Since this is a design derived from my two ring design, the position of the counter…
Letters A-Z for embossing paper or card. 13mm lenght letters Blank for separator Updated: added numbers and some characters Attach together and it will form hinge for stamping To fit together first join flat Print setting: 0.2 layer 3…
Direct drive for Flsun Super racer with Orbiter V2/ Mini Sherpa extruder and Bambu hotend Also LGX lite extruder compatible Use Original fans Use M3 nut brass (3mm lenght) inserts for Orbiter/Sherpa, Bambu and effector fix to housing For…
Direct Drive for FLsun super racer with Bambu hotend and HGX 2.0 extruder This compact extruder claims light weight and high grip M3 inserts of OD4.5mm Length 3mm for fixing the bamboo heatsink and for effector plate M2.5 insert Length…
Door bracket replacement for Liebherr fridge Print Settings Printer: FLSUN Q5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Sakata Petg White Category: Parts
Set of Tools Holder for Wall Hex, Bit Hex, Sockets, Tweezers, Srewdrivers, ER20Collet, ER32Collet, Spatulas, pliers... Print Settings Printer Brand: Flsun Printer: Flsun Super Racer Rafts: Doesn't Matter Supports: Doesn't Matter…
Direct drive for FLSUN SR with the removable Bambu A1 hotend and LGX lite or HGX V2 extruder. Subject to changes! Original 4010 fans can be used Adapters for two 5015 fans Updated adapter for CPAP 3010 Fan for hotend heatsink Insert the…
Replace Feet pad for MacBook pro 2015 (A1398) With lips. No need glue. With or without tip Added model 2mm height Print setting: 0.1mm layer 100% infill Not Supports material: TPU
FLSUN super racer with Bambu hotend and Bondtech LGX Lite extruder Updated Added grille exhaust for best air guide. The grille diverts air away from the bed, especially helping with enclosed prints. Added house fan3010 "David version"…
Mini Libra Extruder adapter for FLSUN SR Use three M3 countersunk screw to join the two parts and two M3 screws with inserted nuts for the mini libra extruder. Cut a piece of ptfe tube to guide the filament to the hotend (all metal or…
Duct for FLSUN Super racer Best air guidance than the original and quick disassembly Fit with real Volcano Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: Esun Abs+ Category: 3D Printer Parts
New version Duct Fan Layer for FLSUN SR Super racer Height for real volcano block Quick disassembly only loose screws Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: any PLA870 any Category:…
Reel for winding enameled wire or other wires. It can wind more than 500g of enameled copper. Two screwable parts. Small holes to hold the wire Enjoy
Ring Adapter M12 lens for Macro aplications. Nozzle Camera Length 6, 5 and 10mm. And others bushings type for 15x15 mini camera usb. Allows closer focus. Lens M12 metric pitch is 0.5mm. It is necessary very small layers (0.1mm) Important:…
All-in-one House/effector for the FLSUN Superracer with LGX Lite Extruder and X1C Bambu Hotend Added step file House/effector Updated: Added Adapter for BTT ADXL345 V2.0 Accelerometer [adxl345] cs_pin: PIS:gpio9 spi_software_sclk_pin:…
A Simple Optometry Trial Frame for 38mm lens. Up to 3 lens for eye. Include Occluder. Updated: Added new frame Version2 with individual spring per lens for a better fit 144mm width frame 66mm PD Adjustable Temple Arm length Tip: fine sand…
This is a remix of this fantastic model for Elegoo Centauri Carbon with 10mm round magnets , which I had on hand. Another some minor modifications for a better fit. This model provide open air ducts for best hotend cooling and hole for…
Stand for T12 Soldering Station with Tips Holder Two version: with or without Tip cleaner Added T12 Power Supply Version (not tested, please feedback) Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Large button for add to the standard foot switch of guitar pedal Print Settings Printer: Flsun Q5 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: any pla any Category: Music
Vase for pencils or ornament Print setting: vase mode: 0.2 layer 5 Bottom layers
Toyota Yaris Cross Hood Rod Holder and gasket The looseness of the retainer causes it to make noise. This is a complete replacement part made of TPU to eliminate vibrations or just a TPU gasket to put it with the original part Print…
Replacement for the original cover with the hole for installing the light in the rear seats and do not destroy the original. Updated(30/03/2026) Added Step Files For great finish you can print in resin. Also by mixing resin you can get…
All-in-one House/effectors for the FLSUN Superracer with HGX Lite V2 Extruder and X1C Bambu Hotend and TZ V6 Hotend Update: Added Effector/house LGXLite/HGX Lite Combo with X1C Bambu Hotend Also Houses for original effector. Need Effector…
right angle joint aluminum profiles Design for 20mm square profile but scale for other Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,2mm Infill: 20% Filament: any pla any Category: Parts
Direct Drive for FLSUN Super Racer with Bondtech LGX Lite, Orbiter V2 And Mini Libra/Sherpa Updated: Now add models with nut inserts compatible Use Original Fans Original Effector or Printed Effector Use M3 Screw Bolt head and M3 Nuts for…
Simple adapter for FLSUN Super Racer and Bondtech LGX lite, Orbiter V2 and Libra/Sherpa using original effector housing. See this for Full Printed Housing (30g lighter):…
Filament Cleaner Vessel Put little rectangle sponge or foam inner Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: any PLA any Category: 3D Printer Parts
Flsun Q5 Mini Sherpa Direct Drive (HGX lite extruder compatible) The extruder is angle mounted allowing full movement on the bed House is a single printable piece, supports are necessary, if you print it upside down less support material.…
Super simple but effective Spool filament holder for FLSUN SR Also compatible with FLSUN Q5 Put Little amount grease inner two parts for spin smooth Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution:…
Adapter Plate for direct mount BMG/V6 extruder type on CR10/Ender3 with 8 or 12mm Inductive sensor Bed level and adjustable 5015 blower fan layer. Easy adjustable height to bed of extruder and blower fan and fast dismount for test…
Removable Nozzle Camera Mount for FLSUN SR Use USB square miniature camera 15mmx15mm. Can adjust focus screwing optic. Different arm lengths for focal lengths. I have tried 6, 9 and 12mm lenses. Camera used:…
Custom Nail design for archery target Printer setting: 0.2 layer 15% infill No supports brim is recommended
Box for 30 trial Optometry Lens and box for trial frame Individual printed springs hold each lens avoiding disorder and damage Use two M2.5x10 screw for hinges Printer setting: 0.2 Layer 3 Wall 3 Bottom/5Top 10% Infill Tree Supports for…
Housing for diy Vactrol single or double Photoresist cell (LDR) and Led 5mm or 3mm Led Red or white can be used Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: any pla or petg black…
Small models for fast Tests for retraction, pressure advance, extrusion, seam
Active chamber for my Enclosure Flsun Super racer: https://www.printables.com/model/702303-flsun-sr-superracer-enclosure Version2 for PTC up to 400W (My choice 220V 200W INSULATED) https://es.aliexpress.com/item/1005007442989854.html Mini…
Cuvette for pH calibration of Idronaut Multiparameter Oceanograhic Sensor. The original (also 3D printed) is very tight. Print Settings Printer: Creality CR10 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: any PLA, PETG any…
Tool to facilitate Aiwa DAT alignment. Holds the tape in place once the slide is removed. Compatible with AIWA XD-S260 and XD-S1100 models Once the slide is removed, you have access to all the posts for adjustment. This tool allows you to…
Rubber Brake for DAT AIWA XD-S260 And XD-S1100 These small rubber cylinders designed to brake the reel degrade over time; this is a replacement made of TPU 95A material Three diameters 4, 4.2 and 4.4mm for best fit Print Settings: 0.2…
These are all currently available results.
