Counting matching models…
Quadruped I Printable Quadruped Robot Step by Step assembly instruction. With code This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without…
Quadruped II Printable Quadruped Robot Step by Step assembly instruction. With code This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without…
Robotic Arm Arduino based Robotic Arm Full Assembly guide and code-base This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs,…
QuadBee - Defend Your Country! Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where…
HexaPod - RC Controlled RC Controlled HexaPod. Full instructions This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code…
Wheeliebot - w/ Code Small selfbalancing bot. RC-controlled can jump This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code…
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! Most common 73 parts are included: 3704 Black Technic Axle 2 3705 Black Technic Axle 4 3705 Green Technic Axle 4 3705 MdStone Technic Axle 4…
Robotic Arm (Arduino project) Complete Robotics arm. Controlled through an arduino. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without…
I based this model off the 4 gb ram edition. Parasolid and step file formats available for download if you scroll all the way to the bottom in the files area or just download all files. Raspberry Pi 4 Model B - Buy it here from Amazon
LEGO Technic Gears - most common gears and colors. Parts included: 3647 Technic Gear 8 Tooth 3649 Technic Gear 40 Tooth 3650 Technic Gear 24 Tooth Crown Type III (x pattern) 4019 - 4562487 - 4211563 Technic Gear 16 Tooth 4143 Technic Gear…
Titan A RC-controlled quadruped with Tracks. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code archives, or…
Arduino compatible Ultrasonic sensor Buy the HC-SR04 Sensor HERE
1602A / I2C LCD Display Module - 16 X 2 Text LCD - I2C CTRL Adaptor included Buy from Amazon here!
Print the mold in a harder material. PLA or ABS is fine alternatives. Print the bait seperately in a flex material. TPU is not the best option for lures but it works well enough. You can support my work and buy me a coffee here: Buy me a…
Printable mold for a crawfish bait for fishing. Print the molds in PLA or ABS for good Silicone molding results. You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!
Replica of the HW-040 Rotary Encoder. The model is based exclusively on measurements taken from the one I have in possesion. For compatibiliy please check the module dimensions. File format: STEP Buy it here! : https://amzn.to/4nO8hpF
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!
Quadruped II - v1.0 A place for the v1.0 files of This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code archives, or…
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! An assortment of threaded inserts for injecction molding to put into your models. Included Models: M2x3x3.5 M2x4x3.5 M2x5x3.5 M2x6x3.5…
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! 6541 Technic Brick 1 x 1 with Holes 3700 Technic Brick 1 x 2 with Hole 3701 Technic Brick 1 x 4 with Holes 3894 Technic Brick 1 x 6 with Holes…
Infill 15% Any material will do. PCTG/ABS/ASA is stable good materials. PLA will print fine! Mix silicone glitter and some powerbait and you will have your foreverjig when fishing!
INA219 sensor model. The textured Solidworks model is in the .ZIP folder. Lower detail STEP files are also available. The Solidworks model has two configurations for the with/without pin header. The model also contains electrical…
Arduino Giga R1 WiFi model, based on the original Step model from Arduino but with pin headers and labeling Buy it here!
Presenting a revamped iteration of the original Prusa Enclosure V2. Apart from the corners nothing has been changed. No need to change any fasteners. You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you…
This is a Mean Well LRS-350 power supply. Buy the 12v model HERE Buy the 24v model HERE
Stepper Motor Nema 34 shaft D14 length 68-151mm You can buy them here: https://amzn.to/47cNghk
The housing is for a rectangular hygrometer which you can place inside the Prusa Core One. I have modelled and uploaded several models to fit the most popular dimensions of Neodym magnets. This project contains affiliate links, using them…
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know!
Silica gel container for a IKEA 365+ food storage container
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! It is built already with 10 standard colors, which are still in use by Lego company after 2011. Colours are adjusted with colour guide from:…
Printable fishing lure. Replica of the classic Imakatsu Java stick lure
You ccan buy the L293D Motor Driver Shield HERE Operating Voltage: 4.5V to 36V (motor supply) Logic Voltage: 5V (from Arduino) Current per Channel: 600 mA continuous (1.2 A peak) Number of Channels: 4 (drives 2 stepper motors or 4 DC…
A small four-legged walking robot driven by twelve micro servos. Each leg has three joints (abduction, hip and knee), every joint turns on a self-lubricating bushing, and an IMU keeps the body level while the legs trot. An Arduino Nano…
You can buy the Rasberry Pi Zero 2 here This is an on going project of the new raspberry pi zero. All dimensions are accurate to the CAD drawings provided. I have modelled a variety of the SMD components or readjusted from existing other…
A 3D-printed, motorized model of NASA's Curiosity and Perseverance rovers. Sawppy copies the real rovers' rocker-bogie suspension, so all six wheels stay on the ground over rocks, curbs and garden edges. Four corner wheels steer, which…
# 28BYJ-48 Stepper Linear Actuator with Printed Ball Screw A pocket-sized motion axis you can print in an evening. The slide uses the cheap 28BYJ-48 5 V stepper that comes with most Arduino kits, a printed rail with a recirculating linear…
Infrared sensor is most commonly used for object detection and avoidance. The effective range of the sensor is 2 - 30 cm, trimmer (potentiometer) is used to calibrate the sensor for desired range. Operating Voltage 3 - 5 V DC. It can…
Rasberry Pi 5 - Case 15% infill No supports
Infill 15% No support Print with any material. PLA prints fine PTCG/ASA/ABS is good choices. For the baits. Mix silicone with glitter and some powerbait for guaranteed fishing luck! :)
Open Duck Mini v2 is a 42 cm tall, two-legged robot in the style of a cartoon duck droid. It walks on its own with a reinforcement-learning policy that runs on a Raspberry Pi Zero 2 W. Five servos per leg and four in the neck and head…
Simple Peg to hold your polaroid pictures. I printed the spring in PETG for additional strength. PegLeg Infill: 15% Base supports from build plate Organic Supports PegSpring 50% Infill
Power Supply L215xW115xH50mm Buy S-250-12v HERE Buy S-250-24v HERE Buy S-250-36v HERE Buy S-250-48v HERE
An active cooling case for the Raspberry Pi 4. Along with Thermal & Flow Simulation (dm for simulation files) Aesthetically designed.
CUBOTino is a compact robot that solves a scrambled 3x3 Rubik's cube on its own. A Pi Camera reads all six faces, a Raspberry Pi Zero 2 W works out the solution, and two servos flip and turn the cube until it is solved. A small screen…
OpenSlider XYZ Camera Slider OpenSlider XYZ is a 3D-printable motorized camera slider for timelapse and product/video motion shots. It uses printed axis mounts and carriages on 2040 V-slot extrusion, GT2 belts and pulleys, NEMA 17 stepper…
A light, fast, open-source research quadruped. Solo-8 has eight brushless actuators (hip and knee on each leg) with low-ratio timing-belt transmissions, so the legs are back-drivable and torque-controlled. It can jump, trot and recover…
Stack-chan is a palm-sized companion robot. An M5Stack Core2 shows an animated face, and two small SG90 servos let it look left, right, up and down. It runs JavaScript firmware, so you can add your own behaviours, connect it to chat or…
A pair of small 6-axis robot arms for teaching robots by demonstration. You move the leader arm by hand and the follower copies it in real time. Record those demonstrations and train a policy with Hugging Face LeRobot so the follower can…
Kayra is a small humanoid robot you can print at home. The legs, hips, chest and arms are printed parts driven by standard hobby servos. A Pimoroni Servo 2040 controls the body, and an optional ESP32-CAM head streams video to a PC for…
LeKiwi is a small three-wheel robot base that drives in any direction. Three omni wheels sit 120 degrees apart, each turned by a Feetech STS3215 bus servo. A Raspberry Pi 5 runs the robot and streams two camera feeds to your laptop. The…
Parallel SCARA Plotter V2 A compact parallel SCARA drawing plotter built around printable parts and Arduino-style control. This package gathers the print files, firmware references, and rebuild docs for easier use. What is included…
Biomimetic Human Hand A printable biomimetic robotic hand project with many mechanical parts, electronics references, and a structured rebuild package for people who want to study or recreate the design. What is included Printable…
A two-wheel self-balancing robot that uses quiet gimbal BLDC motors under field-oriented control instead of geared DC motors. An MPU6050 measures pitch, two encoders track the wheels, and a cascaded PID loop keeps the robot upright while…
Cloudy is a compact, fully 3D-printed differential-drive robot base built for ROS 2. Two NEMA 17 steppers drive belt-reduced wheels, four sprung caster wheels keep it level, and a closed body holds an on-board Linux computer, a 2D lidar,…
# Modular Mini Conveyor Belt for Arduino Automation A small, fully 3D-printed conveyor belt for automation experiments on the desk. A TT gear motor drives the belt through an L9110S motor driver, an Arduino Nano runs it, and an IR…
# MagLev Electromagnet Levitator for Arduino A desk-top magnetic levitation stand. A permanent magnet on top of a hand-wound coil pulls a small neodymium "floater" upwards; a linear Hall sensor under the coil watches the floater, and an…
JoystickBox Arduino Controller A small printable controller box for Arduino Nano shield, Bluetooth controller, and joystick hardware. This package makes the printable files and sourcing notes easier to find. What is included Printable…
Loki is a small round home robot you print yourself. It drives on two brushless gearmotors, maps your rooms with a spinning 360-degree LiDAR and uses a phone in its head as a face. An ESP32 runs the Kaia.ai micro-ROS firmware and talks to…
# Useless Music Box with Arduino Nano The useless box, with a twist: when you flip the toggle switch the lid lifts, a printed finger comes out, a buzzer plays one of ten short tunes (Super Mario, Tetris, Star Wars and friends), and the…
https://www.printables.com/model/1475637-wheeliebot-w-code All relevant information about the project is in the original project. The only difference is that clubmembers get access to Stepparts and Solidworks parts when applicable. Also…
Description https://www.printables.com/model/1451339-quadruped-v10-full-project All relevant information about the project is in the original project. The only difference is that clubmembers get access to Step and Solidworks parts when…
Project files for the Quadruped II model. Full project description can be found here: https://www.printables.com/model/1451339-quadruped-ii
Introduction Early access for clubmembers. Future project to build a controllable hexapod. The purpose is to give the members early access to what I am currenty having in mind. Perhaps you will make a working walking hexapod before I do…
Fully modelled Lego Set. Assembled and modeled identical to the assembly guide for the real set.
Fully modeled Lego set D11 bulldozer - 42131 Buy the original set here -> Amazon Link
These are all currently available results.
