Counting matching models…
Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports. There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and…
Scale to prefered size
I added text to it so you can remember the use. PLA, 0.15 mm layer height , 10%infill.
Print at 100% scale for 1/14
Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…
Print lying on back with front upwards.
Can be printed without support
Print at 100% scale for 1:14
It can be scale adjusted in slicer . Perfect as accessories for your RC worksite or for loading on your Tamiya trucks.
print upright, no supports needed
No supports nedded .scale in your slicer to suit your needs,100% is 1/14 scale
Print lying down. Upload your makes, i would love to see them.
Print with round part lying down on the bed. 0.3 layer height , with a brim. No supports needed. Place to stand in the middle vertical slot of the AMS box
Print frame in black and engine in red/yellow or blue. Print upright . Join both finished prints with a drop of superglue.
Print upright. Upload your makes, i would love to see them. See my smaller uploaded version too.
Printed without any supports and at 0.3mm layer height -draft.
1/14 scale electricity transformer for model contruction, diorama or engineering.
Printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
Printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
Print upright. Upload your makes, i would love to see them.
Troubleshooting file, if you need to double check your software calibration or if hardware like your bed is not uneven
Print in place ,It can be rescaled in your slicer to suit your choice. 100% is 1/14 scale
All parts print separate and fit into the allocated indentations/grooves. Print the handle, axles and foot stand with a brim .A drop of quick drying glue to hold them in place. Let me see your makes. :-)
printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale. Print upright. Upload your makes, i would love to see them.
Upload your makes, i would love to see them.
Easy print as standalone art or as a base for plants/corals .
I got best results by printing at a 45 degree angle with supports
printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
No supports, print upright, scale 100% for 1/14
3mm layer height Print upright Brim 3 walls/perimeters
Pint at 0.2 , even 0.3 gives good results. 10% infil.
Print with 0.2mm layer height ASA,PETG or even PLA works fine.
Designed to be printed in PLA. 20% infill , 0.2 layer height. Print upside down. for best results , first prime the base then paint with flourecent orange paint. Optimised for JSB pellets but will work for a lot other brands.
Tactical mount for 20mm diameter flashlight. 0.2 layer height Print in ASA or ABS.
Their are 2mm holes for glueing a 2mm wire at the back of the welding machine and in each tool lead. Use a 2mm metal wire into the hole for the electrode. Print welding leads upright with a brim (see gcode file).
The shirt has a habit of getting ripped. Protect the front of your rider with this item
Print at 35-60 degree angle . use supports.
Print lying down. No supports needed. scale 100% for 1/14
No supports needed. Scale 100% for 1/14
print at 90 degree angle with supports, see pic.
print with 0.2mm layer height Thighten with bolt/screw and nut. PLA,PETG or ASA(with ASA or ABS takeaccount for filament contaction)
Dumpster body prints withut support , for best result with the lid print upright on side with supports (see picture) . Attach lid to dumpster with wire or screw into the 2mm hinge holes. Upload your makes, i would love to see them.
2 piece model. Printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
Hang your DJI FPV drone on the wall. Print on the side. No supports . 30% infill.
printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale. Upload your makes, i would love to see them.
No supports needed, scale to suit your needs ,100% is 1/14 scale
Designed for use with the guns original/stock rubber shoulder pad.
Print in PETG , ASA or ABS if your light source heats up. If you are using a single RBG led that keeps cool , you can use PLA
Choose the STL file or the multicolored (4 colours) file version done in Bambu studio. Both can be printed as one piece. I have also uploaded the 5 separate components if you want to print them separately and assemble it yourself. Printed…
Can be printed in PLA,PETG ,ABS,ASA or TPU 0.2mm layer height 20% infill. Update: i have added the version with space for an O ring for a tighter fit.
1:14 scale model of a man sitting and welding
Upload your makes, i would love to see them.
Print in PETG ,ASA or ABS so it can withstand heat
ATM for your diorama, can be scaled in size
PLA, 0.2mm layer height ,20% infill
Print in PETG or ASA. Put two 6x3mm neodym magnet in each hole. Put a little drop og glue on the back of the outer magnet and hold it to the AUX fan casing, when this sticks, remove the cover and glue the inner magnets in the bottom of…
All in one print for your RC construction , Crawler or dollhouse dioramas. The version with the thicker lift ring is for extended durability if you want repeatedly lift with crane hook or grapple.
All good prints need a good display piece. Print cactus in green and base in brown, grey or other desert color. The 3 Cacti are to be places in the 3 depressions made for them on the mount Scale to fit your print bed or even print 2 rocks…
The AGN Vixen can experience loss of barrel alignment of a few centimeters when pressure is applied to the shrould either by holding the shroud or resting it against a support. This washer fits snugly into the small space between the…
0.2 layer height. PLA Engraved with the words ‘AGT Uragan’
Only the antelope ears need supports, tree supports are well suited for this. Print in 0.2 or 0.15 layer height , 20% infill for best results. Paint on supports only under the antelope ears Can be painted using coloring tool in any slicer…
printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
Print standing upright , brim for stability ,with 100% infill and 0.2 layer height
Print at 0.16 layer height or less, 30%rectilinear infill , turn on Ironing for all top surfaces for best results. Can be printed in multicolor.
For 2 colours printing, change the filament colour from Z=3.28 layer height
designed for 1/16 scale but can be scaled to prefered size.
Print lids upright. Use a small drill bit if neccessary to clean out hingeholes.
Only the Seal's nose need supports Print in 0.2 , 20% infill for best results. Paint on supports only under the seal nose Can be painted using coloring tool in any slicer for realistic results, the uploaded 3MF files are for Bambu studio…
Print in 0.2 , 20% infill for best results. Supports only needed under the bears belly. Can be painted using coloring tool in any slicer for realistic results, the uploaded 3MF files are for Bambu studio slicer. If you like this , see my…
Only the elephant chest need supports Print in 0.2 or 0.15 layer height , 20% infill for best results. Paint on supports only under the elephant chest/belly Can be painted using coloring tool in any slicer for realistic results, the…
PLA, Print upside down, 0.15 layer height, no supports needed
1/14 scale but con be scaled to fit your desire.
Covers the excessive silver and gives it a more tactical look . Print in black TPU og Flexi filament. 0.2 layer height.
Print upright. 0.2mm layer height. Brim .
An extra mounting option for a tactical mount like a target flashlight etc.
2.0 mm layer height, 20% infil, 3 perimeters. Tree Supports.
20% infill 0.2mm height
printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
0.2 mm layer height I have made a Gcode for the Bambulabs with paint-on support for direct print. I also have upoaded Gcode for a multicoloured version
A bus stop sign to go with my Bus stop. - see my page for the bus stop canopy stl
3 perimeters/walls, 0.2 mm layer height, 20% gyroid infill
Print in PETG , 4 perimeters/walls, 0.2mm The link below is the oil/water separator /filter in the pictures above but it should work for many more on Amazon and Aliexpress with a diameter of about 30mm.…
Understanding your roots, your history and your past , gives you resolution and will to understand your future.
Print without supports, 0.3mm , using ASA. This is for the fan suction air inlet and air inlet to the combustion chamber combined into one so you do not have to make 2 openings.
Always remember which are your favorite pellet for the particular gun with this cool customized pellet tin holder
Customised Boat Keyholder. Print with 0.16mm layerheight or less, Preferably Arachne if you want to print multicolour.
Print face down. PLA is fine.
print in PETG . 4 perimeter walls 20%infill
Print at 0.16 layer height or less. 30% rectilinear infill. Turn ironing on for all top surfaces for best results.
The base printed at 0.3mm and 50% infill is more than adequate to hold most hollow cork barks upright. I have also made 3 hollow slots in the bottom to allow for glueing 3 x 10cm Ø iron/brass rods incase you need for bottom weight if your…
Customised Boat Keyholder. Print with 0.16mm layerheight or less, Preferably Arachne if you want to print multicolour.
Customised Boat Keyholder. Print with 0.16mm layerheight or less, Preferably Arachne if you want to print multicolour.
Slight adjustment of scale may be neccessary depending on the shrinking properties of the particular filament you are using. It should be a very tight fit and inserts with a rubber hammer.
Model of El-box for construction site
The logo allows minimal light from the LCD screen at night to create a lighted effect
