Counting matching models…
Wings to be able to mount a Cisco C1000 into a standard 19" rack. I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic…
Lost most of the supplied keys, made this design in order to be able to make more when needed. Print at 0.2 (or better) layer height, slowly since there are some very small indents on the sides that are needed to unlock the blocker.
A simple mount for a Steinel heat gun (type-3841). Nothing fancy.
Needed the option to mount the smaller POE injectors. Add a clip (found on my page) and voila! Other types of Ubiquiti injector will “fit” like the small POE-24-12 but the fit isn't as tight.
A simple bracket to mount my soldering iron under my desk. *** Added STL file
Thing to make the Ubiquiti POE-54V-80W Din Rail mountable. Works best in PETG or PC. You will need a Din Rail clip, either from the jungle site or make one yourself (model can be found on my profile). Note that it is a very tight fit.
Gridfinity (4x3x6) compatible insert for an Wera Kraftform screwdriver kit. This is for a Canadian specific kit with 3.5mm flat, Robertson #1 (sq6), Robertson #2 (sq8), Phillips #1 and Phillips #2. “Bits” can be tilted up for easy removal.
A 1x4x6 gridfinity for a wera 1013 bit holder and 14 bits. Bits can be a little tricky to remove as there is not all that muck space in the 1x4 bins. I printed my model mirrored.
Clip on sleeves to help differentiate Wago using color codes. Tight fit when printed in PETG or PC. Print laying flat. The sweet spot for me for cooling vs strength is obtained when printing 6-8 clips at a time. Only for 2 and 3 position…
Prints standing up with no support. Can be printed with either fine or coarse layers with little effect on functionality. *** Added Step and STL files.
1X1X3 bin for Exacto and a box of blades
I needed a quick solution to make the Flex switch Din Rail mountable. With this bracket and a readily available Din Rail clip I can now install my switches in enclosure with Din Rail. I also have a model with the ports facing down instead…
Wall mount for drill or impact with a few slots for spare bits. Can be printed at almost any resolution without significant loss to functionality.
We are using Axis M5074/M5054 and M5054/M5055 camera underground where they can be exposed to water, this mount will prevent water ingress from the back. Can either be mounted on standard Unistrut or for less permanent install there is…
FS doesn't seem to offer a 6 fiber only plate for their FHD enclosures. So I modeled this to be able to grab the connectors and hardware from a Corning CP-06 and transplant it in this plate. You can simply print the “plateonly” modle and…
These are all currently available results.
