Counting matching models…
Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…
CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…
CArts Little Acro Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 450 g Drive: brushless motor (up to 28mm diameter, 25mm length) Propeller : folding propeller Battery: 2S-3S Lipo 500-1000 mAh Controls:…
Phone case for the Samsung A22 Printed in PETG or PLA. Printable in TPU with adjusted scale-factors. (x,y: ca. 99% ; z: ca. 105%) More 3d-printing tips on my website:…
Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…
CArts Little Acro EDF-Version Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 600-650 g Drive: EDF 50mm diameter Propeller : folding propeller Battery: 3S Lipo 1000 mAh Controls: elevator / rudder /…
Phone case for the Samsung A03 Printed in TPU (Varioshore-TPU). Do not print in PLA or PETG. It won't fit! More 3d-printing tips on my website: https://c-arts-modelle.de/carts_modelle_web/3ddruck/3ddruck_tipps_engl.html
Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…
Swappable thermal wing for the Lukisegler rc-glider This wing is designed for the Lukisegler rc-glider ( https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider ) to give it better thermal gliding properties. You can…
Samsung A04s smartphone-case Rigid smartphone case With raised lip (height about 1.5 mm) for a better protection of the display. Printed in TPU. Do not print in PETG or PLA! The case will not fit! More 3d-printing tips on my website:…
Small control horn for RC planes Printed in PLA or PETG with a layer-height of 0,12 mm. The 3mf and gcode files contain 4 control horns and 4 counter plates. They are printed as multiple parts in one pass to reduce stringing. Kleine…
Lukisegler XXS 3d-printed free-flight glider. Printed in LW-PLA. Reinforcement for the fuselage and main spar printed in regular PLA. Wingspan: 400mm Length: 260mm Weight: 18g Additional parts: 1x M3 x 20 screw 5-6x M3 nut 4x M4 nut.…
Lukisegler update (english) Update of the wing-parts 10 (l/r) and 12 (l/r) from version 2 (v02) to version 3 (v03). The perforation for the servo-cables are now included in the printed part. It is no longer necessary to cut the holes by…
The Lukisegler 3.0 – Improved Fuselage Concept The Lukisegler version 3.0 is based on an improved fuselage construction concept. The 3D-printed parts are made from LW-PLA and printed with infill for a lightweight yet durable structure. It…
Zlin Agroturbo 1100 Version 1.0 (12.11.2023) Wingspan: ca. 1100 mm Body length: ca. 750 mm Take-off weight: ca. 550 - 650 g Motor: Brushless Motor 28mm Durchmesser (2200kV) ESC: 30A brushless-ESC Propeller: 7*5 ‘’ Battery: 3s Lipo 800 -…
Samsung A14 smartphone-case Rigid smartphone case With raised lip (height about 1.5 mm) for a better protection of the display. Printed in TPU. Do not print in PETG or PLA! The case will not fit! Needs Supports. More 3d-printing tips on…
Lukisegler-NG XS e, Update to brushless electric drive Wingspan: approx. 900 mm Fuselage length: approx. 500 mm Take-off weight (LW-PLA): approx. 120 g Controls: elevator / aileron / motor Center of gravity: 8 mm behind the profile nose…
Lukisegler update (english): Servoplate for 9g Servos Servoplate for 9g servos (standard-mini-servos). Lukisegler update (deutsch): Servoplate für 9g Servos Servoplatte für 9g Servos (Standard-Mini-Servos).
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
Creating wings in FreeCad and PrusaSlicer, optimized for single perimeter printing. I made some video tutorials, how I create my RC-airplane wings. I do the CAD-part in FreeCad, a free, opensource CAD software. The gluing surfaces are…
This case can be printed in PETG or TPU I have provided 3mf-files for PETG and 3mf-files for TPU ( x,y scaling factor 0,992, z scaling factor 1,04 ) The TPU version has to be adjusted in x,y and z direction for a snug fit! I also raised…
RC Airplane hanger for small airplanes The height of the hanger is adjustable. It is designed for a load of max. 1kg. You will need one or two 4mm x 20mm wood screws to secure the two parts and at least 2 (better 4) 4mm woodscrews to…
Sanding Disc Organizer (50 mm) With this organizer, Velcro sanding discs (diameter 50 mm) can be stored neatly. It consists of individual modules that can be linked together. The modules can be rotated. This allows for space-saving…
Crank wheel for the Comgrow ROBO CNC router Printed in PLA or PETG 3-4 perimeters 0,2mm layer-height 10-15% infill Additional parts: 1x M4 x 40mm screw 12x 3mm x 10mm sheet metal screws Montage and installation video: Handrad für die…
End cap for a shower curtain holder (tube diameter 20 mm) This is a replacement end cap for a self tightening shower curtain holder. The tube diameter is 20 mm. rubber or cork can be glued to the back of the cap so that it has a better…
Wooden smartphone holder (CNC-Version) The smartphone stand is in the shape of a chair/armchair. The smartphone can be placed horizontally or vertically on the stand. A cable feedthrough in the base allows you to charge your smartphone.…
These are all currently available results.
