Counting matching models…
Is shorter than LDO one, and goes at the back of the printer for an easy access to it. BOM : 3 wago 2 pins as on the pics 2 JST XH female 2 pins 2 x 40 mm cables Some heat-shrinkable sleeve Iron soldering Just have to solder 2 wires to…
Just use : 4 JST XH male 2 pins 8 x 40 mm cables some heat-shrinkable sleeve 2 x m3 T-nut (hammered also) 2 x m3 screw (lengh 8 to 10/12 mm depending if using cover or not) Just have to solder cables to jst and secure it with some…
############################# UPDATE ############################# 14/09/2023 : added DXF folder with dxf files if you want to order your pannel CNC's cut by specialized website (or if you have a CNC) added mirrored files for the hinge in…
This is a nozzle holder for hot air gun station Atten 858D+ : https://eleshop.fr/atten-at858d-hot-air-soldering-station.html Easy to print, just unscrew the 2 screws on the side, place the nozzle holder and screw back with originals…
Just made the walls thicker than the original. On my pics, in Sunlu ABS grey are the original, and in red are the remix with thicker walls. Also rotated it to have it at the right printing orientation when importing it into the slicer.…
Wasn't intended to publish, but since some people asked me on VoronDesign for the files, i have decided to share it. I got the steps from github and the missing one directly from nateb16 (nate5815 on discord) that i greatly thanks for his…
No supports, use ASA or PETG material.
Will have to use supports, use ASA or PETG material.
Same BOM as on Github, wiring on the right, to be attach on the outside of the 2020 extrusion.
BOM : 3 x m3 heatset insert (Length 4mm, OD 5mm) - from Voron BOM 1 x m3x20 SHCH 3 x m3x8 BHCS 1 x m3 T-nut or hammered T-nut Just disassemble your C310, and keep the cable and the PCB (you can unplug the cable from PCB with the connector…
Last week, there was those drawer locker during the Lidl DIY week at Lidl. I bought 2 of the one with 32 little drawers and 1 with the biggest drawers at our local shop. Link to order on website as well :…
I have tried differents solutions and tips you can find on the web, none worked. This one was definatly the win. There is a paper template to print and assemble with tape, use it to cut the mosquito net (x6). It takes some time, but it…
BOM : 3 x m3 heatset insert (Length 4mm, OD 5mm) - from Voron BOM 2 x m3x16 SHCH or BHCS screw 1 x m3x6 BHCS Original m5 BHCS M5x10 might be too short, so use a M5x12 or longuer Just disassemble your C310, and keep the cable and the PCB…
Those covers suits a HA12 reinforcing bars. You can fix to it a label with your type of tomatoes, with a simple M3 screw. I have decided to reduce the m3 hole where goes the screw, that way you can drill the m3 hole with the m3 screw (no…
Dimensions are 15 mm long. There are files for 8 mm braided sleeve with 1, 2, 3, 4 or 6 guides → see files named “Guide gaine tressee 7.5 mm”. There are also files for AWG18/16 (with heating shrinkable sleeve or not) with 1, 2, 3, 4, 6…
No supports, use ASA or PETG material. I used 20 mm long m6 threaded rode, 2 m6 nuts and a m6 x 20 x 1.5 mm washer.
Just created to replace the stock broken one. Printed in PLA, no supports. Just have to clip it into the chair.
These are all currently available results.
