Counting matching models…
Very well balanced. Designed to be printed on it's back. Part is very strong this way. I used organic tree supports and it worked great. Took the idea from the stealth ps5 stand. Modeled off a known good ps4 controller body and molded the…
Changed print orientation to make part a lot stronger. No support, quick print
2 models, 1 with hole, 1 without 4 position throttle lever set. ALWAYS RIDE WITH KILL-SWITCH LANYARD SECURELY ATTACHED TO YOU! -Enjoy-
This unique Easter egg decor is compatible with tealights up to 40mm in diameter. I designed these to specifically print well in PETG, so PLA should be a breeze. The optional base has a spot to recess a tealight into and provisions to…
4.5mm guard with additions to make it easily printable. I added 3 supports to the back that snap off after printing. A brim that holds all 10 comb feet down to the bed securely that is also easily removable after printing. Pictured is the…
30% less material, 30% more space. If you use these custom grids with the custom bins I have modified you will get maximum storage space out of your mini toolbox. Bins for top and middle drawer are 20mm in height. The bins for the bottom…
What this project accomplishes Easy/Fast filament loading/unloading from a single position above your printer. The least amount of hardware needed. The least amount of filament needed. (about 130g per box) The least amount of holes being…
Print on side. Will need small support for hook. Recommended to be printed in ASA or equivalent material. -Enjoy-
This is #5 of 6 very unique trees of my 2024 Christmas Tree LED Tealight collection. The full collection can be found here . Each tree has an inset base for a tealight up to 45mm in diameter. Simply set the LED tealight into the base cup…
Scale to your liking. Pretty Delicate piece so be careful handling.
UPDATE: Added a 1mm more clearance version. UPDATE: I have added a model for a “regular” 5015 fan. This model has internal ducting to help with the small fan outlet. UPDATE: Added 1mm more clearance version to "regular" 5015 alternative…
The holes vary in size from 8mm to 13mm in diameter. Hex holes used to aid in better overhang printing. Where the brushes seat is crowned to give a cool look and better balance. Model has a large inner brim built in to help with bed…
V2 - Smaller outer blade connecting supports with deeper tilt help with spin. Simple print, No supports, Zero assembly, Unique wind-spinner. Made provisions for Zip ties and or screws for mounting. Model just balances on its spinning…
This is a remix of the chubby Croc found here by LegoLars - https://www.printables.com/model/788728-chubby-crocodile. You do lose a little bit of resolution at the 50% scale. But you do gain a cute little chubby Croc that sits on your…
Pictured were printed @ 50% size, .16 layer height, 3 perimeters, 3 bottom layers, 5% lightning infill. I made a whole bunch of these. These 3 looked and printed the best out of all of them. Enjoy!
Simply place in outlet box and put your drywall over the top. Marker will push through the sheet-rock. Then Router or cut out your box. You will need supports for the tip. Recommend printing in ASA or better. This is V1 Leave feedback for…
Designed to be a quick print aid for children learning their multiplication tables. Has a slide door so the answer is not given right away. You slide the door down to reveal the answer. Its a good guess/check method very much like a flash…
Was going to use this for a project but ended up going a different route. Still looks pretty cool. -Enjoy-
I made two versions of these little print in place locking cable blocks. A regular version you can use double sided sticky tape to mount. A magnetic version you can slide two 2x8mm round magnets in to use on the inside of lockers or…
This Model is just for the stencil that can be used on any 80mm post-it. If you would like the crate as well it can be found here… https://www.printables.com/model/848150-post-it-note-crate Thanks!
When it's not adorning your wrist, set it on this stylish pedestal. As sleek as it seems.. please do not try to wear the stand. -Cheers-
This is an updated hanging version of my other lantern found here. A few tweaks to make it a bit easier to print. Bottom has been made a bit smaller. Bottom now is solid for tealight to sit in. Top has been revised with a loop to hang it.…
This is a Hexibase original model I modified to make printable with no supports. I split it at the face right at the start of the chamfer so it should hide itself pretty well. I printed in a contrasting color for the look i was going for.…
Mine did not come with this attachment. The one you can buy is too bulky. Made this specifically to clean cars with. Similar to a car wash vacuum end. You can print it straight up with just a brim around the hose base. specifically…
Bins are 35mm x 45mm x 20mm No supports These bins will stack on-top of another. I also made 8 different sized racks for if your looking to have quicker sliding access to them all. One bin has a place to add tape for a label. The other…
Coffin is 150mm x 65mm x 35mm. Made to fit a Dummy 13 but you can add whatever you like. Orientation is all set up in the STL. Print lid in Variable layer height for a cleaner look on the accents. -Cheers-
Every good camping adventure starts with a road trip. Here is an item that will help you keep things organized and have an extra spot for a drink on your journey. Cup holder is big enough to store an Arizona ice tea because that is my…
Designed to be printed face down to have a bed textured face. Just give it a flip in your slicer for that look. Enjoy.
.2 layer height 4 perimeters 3 top and bottom layers 15% Grid infill Two parts to make one handle. You will need to print each file twice to make two handles. Very strong! Made to grab and secure fabric to make a handle. Specifically…
This Luxe Belt Organizer is a necessity for your designer leather belts! The gorgeous embossed honey comb design is reminiscent of a designer pattern, perfect for displaying your fashion belt buckles. It protects belts from damage…
UPDATE: Added 8x2mm and 8x3mm magnet versions. Magnetic box to hold baby wipe's. Internal space is 140x100x60. Spots for 10 (8x2mm) magnets. The hinge pin housings are directional. They need assembled in the correct orientation to hold…
Made some geometry changes to make this easily printable. Made to be used as a prop/toy please don't actually drink from it. Thanks. Enjoy. You can scale it up or down as you wish.
These little cable management hooks/loops are all over the place but I couldn't find one that easily fit into aluminum extrusion rails. You can add these at any point in the rail just twist and lock them in the spot you want. I like this…
Simple full cover plate for off color or painted over outlets.
I used a 15mm brim and some tree supports for the bottom half of the model. The geometry I included into the top half takes care of the rest. See pics.
Prints in two pieces. The Funnel support legs will need a small amount of support themselves when printing (See Pic.) Funnel legs slide into the top of the cage base. You can add a dab of glue if they are not snug enough. The funnel…
A must have tool for any hobbyist. I made this as compact as possible without sacrificing strength. You can find the 8 x 3 mm magnet you will need from any local Harbor Freight or on Amazon. It's really handy when you are working on…
Not sure what car this is out of. If you know leave in comments. -RIP-
1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.
UPDATE: 221-412 and 221-415 added. Keep Wago's organized and clean even when stored in your pocket tool bag or toolbox. Holds 10. Slides open from either end. Hex grip texture on top. I may make larger/different sizes in the future.…
All three pumpkins and their tops are shelled to .8mm thick. This makes for even illumination when a tealight is placed inside while still being fairly sturdy. All tolerances have been adjusted so each pumpkins top fits nicely at all 3…
The 1x8 board is actually 8 inches. I found this to be perfect width for the containers with enough of an over hang on the the front for the filament to feed down out of the containers. To achieve this you will have to buy a 1x10 inch…
internal geometry is the same as the original just changed some other geometry and wall thickness. Walls are 3mm bottom is 2mm
I use a ton of these and they are always scattered all over the place. There is a small overhang at the mouth of the dispenser that will need a tiny bit of support. -Cheers-
This is a true 4 inch trim ring to go around PVC or equivalent decking posts. Will not fit around a 4x4 lumber post. Two locking tabs that are a snap fit. Add glue to them for a more permanent fit.
Original model is really good and a phenomenal design. But whats cooler than 1 or 2 pulleys!? 4 Pulleys!! Works awesome! I would bet your paracord breaks before this pulley lets go. I used Petg and the part is very strong! Recommended…
Size it up or down. Make a wall plaque, fridge magnet, coaster or key-chain to commemorate the solar eclipse of 2024.
Don't be the guy swimming to the bottom of a lake trying to find your dropped keys. I suggest 3 perimeters 3 bottom layers and 6 top layers. Minimal infill to keep as light as possible. 6 top layers will give plenty of support to the key…
Wicker-dly adorable planter! Stylish design for your Easter decorating. The perfect size to display a succulent. Or size up to hold whatever you like! Two versions available. Coarse version will be a significantly faster print.
Looks awesome in Galaxy black PLA. 25% lightning infill, 2 walls 3 top and bottom layers. Rims are Blitz 03's, had to flatten them a bit to get them to work in the model. may do different rims in the future, check back! - Cheers -
Modeled from a broken knob. Use high infill and wall count. The original was pretty thin. I beefed this up quite a bit to hopefully last the lifetime of the fridge.
Will hold your typical 12oz can maybe others. Belt loop is 36mm wide and 6mm thick. No supports necessary.
Connect your noodles to make larger noodles. Or make rings with two noodles!
The duct face ends have been tilted down another 8 degrees and ducts dropped 1.35mm to get optimal cooling directly onto the nozzle. The Biqu mount is offset -30 on the Y and Zero offset for X, making setting things up pretty simple.…
Classic elegance. These gorgeous tealight risers transform any battery operated tealight into a pillar candle. They are wrapped in a simple, yet elegant open lattice design. Simply place a battery operated tea light into the center and…
Fits every 20oz blender cup I own, even pint glasses well. -Cheers-
I use these to quickly lock and hold my bikes up that I raise and lower on pulley systems in my garage with paracord. Pulleys Found here . I would recommend ASA if your going to be holding anything over 75lbs. All parts should be printed…
You will need Three M4*6mm screws to assemble. Two for hinge's, one for handle. Door has built in printing supports. FOR PERSONAL USE ONLY! THIS FILE CANNOT BE SOLD OR DISTRIBUTED FOR ANYTHING OTHER THAN PERSONAL USE!
Can print in any material but TPU will work best.
UPDATED. This is a lil passion project of mine that is seriously not as popular as i thought it would be. But I don't really care. I use these all over my house and garage and they are still are going strong. I'm continuing to update it…
.4 grams each! Works great for under cabinet/desk mounting 8mm LED strips. Simply screw in to desired location and clip strip in.
I Flipped it and printed it on its face. Will print either way tho.
Leaves amp open for optimal cooling and does not hide any knob/hookup information. Very sturdy with minimal material. This is made to go over the case that it comes with. Looks great sitting out on a desk or atop a speaker. The two legs…
Recessed cap for maximum storage. Will fit car keys or any other items you want to stay dry.
Floppy eared bunny. Stacked layers so you can just change colors to whatever you want. Stem will be whatever body color you choose. Mouth nose eyes whiskers and outline stack together. Eyes stick up .6mm. Left the stem long so you can…
I used 3 walls with alternate extra wall enabled. 5 top and bottom. 99% tri-hex infill. Printed in PETG. -Cheers
Nozzle opening at the tip is 3mm. They are 25mm extensions. Work great. Just wipe tip clean before putting the cap back on. They are a snug fit to prevent leaking. If they get stuck, 13mm wrench makes quick work to get them off. I find…
Ferris wheel to be made out of 20 4.5 inch (113mm) craft sticks. Its important when assembling to pick out the straightest sticks of the bunch. This will help with a better end result. You can use glue but not necessary. Test file…
We all do it anyway. Use this instead and it will stay wrapped. Great for anything that uses a cord that plugs into the wall. Hair dryers, clippers, soldering irons, curling irons, glue guns, any power cord really. 2 walls 20%infill
Work great. Add perimeters until part prints solid.
Add some class to your old switch plates. You may need some longer switch plate screws if you have shorty's. The 12mm screws work well for this. No supports needed. The switch toggle snaps into the track.
All parts can be printed on a 256 x 256 bed Stands two feet tall by ten inches round Total filament used is about 1.3Kg. The tube is just concrete sonotube cut to length. The port tube is a 1.5inch ID schedule 40 PVC pipe cut to length. I…
The Quick Scribe is a unique scribing tool with seven offsets ranging from 1/4” to 1”. It securely holds a #2 pencil with built in compliant geometry. Marks measurements for countertops, flooring, cabinets, carpentry and more. Marks…
These are all currently available results.
