P
Printablesw_ew
USB-C PD trigger module enclosure
Use 4x M2.5x7 flat-head screws. Holes in the upper part need to be tapped.
- Downloads
- 71
- Likes
- 8
- Rating
- 5
All models
Counting matching models…
P
Printablesw_ew
Jig for 868 MHz Yagi
Makes it easier to assemble the 868 MHz LoRa Yagi by Taste The Code. Assures the dipole is square and symmetrical inside the boom, with 2mm spacing. https://makerworld.com/en/models/1120277-yagi-antenna-for-lora#profileId-1118525
- Downloads
- 37
- Likes
- 9
- Rating
- 0
P
Printablesw_ew
Xiao NRF panel mounting bracket
Requires 2x M3 screws, M3 tap. USB hole should be approx. 3.3 mm, drill 3 holes with the template and use a file to remove the remaining plastic between them.
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
Printablesw_ew
TBS Chupito camera cage for DJI FPV Air Unit
Required hardware: - Two M2.5 x 6mm screws, preferably countersunk - M2.5 tap - standard set of 4x screws for the camera - optional: 20mm M3 standoff Use CA glue or ABS slurry to attach the horizontal supports to the side plates.
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
Printablesw_ew
868 MHz Yagi mounting kit
Articulating arm and base for 868 MHz Yagi antenna
- Downloads
- 20
- Likes
- 7
- Rating
- 0
P
Printablesw_ew
Cadence magnet - Ultegra + Ridesense
Printed out of ABS with 0.1 mm layers. Designed for 12.4 mm (dia) x 4 mm (height) cylindrical neodymium magnet. If also using ABS: the model prints well over Kapton tape and without a thermal chamber - it is too short for shrinkage to…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesw_ew
Metabones to 8sinn RED Komodo cage
For MB_EF-EFR-BT2 Canon EF Lens to RF-mount T CINE Adapter Mark II and 8sinn Cage for RED Komodo/Komodo-X Required hardware: - 1x 1/4''-20 screw (3/8'' thread length) Smallrig 1713 - 2x M4x10 screws (button head or ISO912 hex) I printed…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
These are all currently available results.