Counting matching models…
An insert for the Creality filament dryer to securily attach a 4mm bowden/PTFE tube. It should be a perfect fit for the dry box hole and a tight fit for the bowden tube. If not, the fit can be tuned with a 4mm drill bit and glue The…
Have mounts that fit perfectly any and all of your rectangular remote controllers with this customizable project. The included STL is just an example with the parameters shown in the screenshot. My initial goal was to mount remotes, but…
This is a two-part mount. The bracket that friction fits the speaker and friction fits/screws into a hole and the cover plate that snaps into it to hide the screw holes. A template to cut the hole is also included. The inside of the…
Toolless GoPro mount for Logitech Brio Webcam with original privacy cover compatibility The model's nubbin in the bottom is used to hold the webcam by the screw hole, and the brackets at the top are snapped over the webcam. A very firm…
Two models are available, one with and without holes. Depending on how you wish to mount it. May fit other similarly sized watch models. If tweaking is necessary, the project file is included Supports are encouraged
If you: Have a UDM SE Cannot hide it somewhere it cannot be seen Hate bright blinking lights, because you cannot sleep or something Also have a 3D printer Congratulations! This model is for you. This cover goes between the ports and the…
A simple bracket for the HSW system to hold a generic contactless voltage tester. Meant to be used with an empty insert. The dimensions I used for the bracket are for testers with a width of ~18mm and a depth of ~17.1mm in the skinnier…
Two models are provided, the one shown in the picture with holes for less material usage where it matters the least but has steepish overhangs, and a solid version
Mounts for the regular LTT screwdriver and the precision screwdriver. Easy to grab, easy to return, hard to fall off on its own. Low material usage and footprint. Both designs require an empty insert If the stubby selection ring and shaft…
Parametric design made with fusion 360, in case you'd like to tweak it for a different model. Supports are required
I present, my halloween costume this year. A big, bright, RGB puke Plumbob. Circuitry: My setup was quite simple. 5v addressable RGB strips connected to an ESP32 (ESP32 C3 Mini for compactness). Powered by a power bank. I used WLED for…
This model accepts gluing 4 6mm x 2mm magnets (sizes can be customized in the fusion 360 project). They are not required, but improve the ability of the arms to hold the jumpers a bit tighter, and allow quickly snapping into other mags.…
External power supplies can make a cable management mess. This is how I resolved this issue for my mini server's power supply, by attaching it to the computer. My method of attaching was strong double-sided tape. It's important to tape it…
The main use I found for these so far, and the reason I made them in the first place, is for binding the leads of my multimeter together in a locked twist. Decreases tangles drastically with no downsides. Can't say I have ever measured…
Charging the watch in the car is convenient for me. It sliding off the charger at every microscopic bump isn't. Therefore, this brace. It can be easily clipped to the powerbank over the watch to hold it firmly in place
These are all currently available results.
