Counting matching models…
A simple notched wege to stabilize shaky furniture, you push it gently (notches facing down) under the corner that needs leveling and break it once you get to the desired thickness. Print Settings Printer Brand: XYZprinting Printer: da…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
The base stargate model i made for this lamp https://www.prusaprinters.org/prints/84419-milky-way-stargate-led-lamp in case somebody could find it useful. I grabbed the glyphs' svgs from Wikipedia, author:…
This stargate is designed to fit a 5V led strip with a switch (round hole) and a microusb to dip adapter (rectangular hole + support). The bottom lid is optional, i put one in mostly to make sure that my despicable soldering stays hidden.…
EDIT: i added a version with the notch for a small alignment pin and the pin itself. I haven't actually printed this one, feedback is welcome The base model i made for the Deep Space 9 LED lamp, in case somebody likes the structure but…
The sagging cable of my neptune 3 max messed up one print too many, this is my quick and dirty solution
A command zone with room for a standard size commander and a manual two digit life counter. The stl has tolerances big enough to print with a Davinci Jr. 1.0 with 0,4 mm nozzle (and some for the cover) The number rotors are a dumbed down…
A ghostbuster trap dice box, the model's handle is actually a bit taller than the one in the picture to make it easier to grab. The little screw will keep the doors shut, use if needed
A slightly modified version bornt from my adversion for glues and tight fittings. Differences from the original model: - Upper and lower scrollworks are no longer hollow and have threads that allow them to be screwed on the additional…
I used a couple of round 1cm (diameter) by 1 mm (thickness) magnets to keep the sphere in place, if you'd like to do the same print the basket_magnet and its cap, otherwise print the regular basket and leave the sphere empty. There is…
Both need supports, for the brain i had to add brim and support brim because i couldn't get good adhesion for the support base. Remixed from https://www.thingiverse.com/thing:3688151
The tree should be printed in vase mode, pay attention to the number of base layers to ensure that the base hole gets printed with no issue. The base should be printed normally without supports Warning: trying to persuade the lights to…
A simple top with hanging hole for a broom. The hole has a 18 mm diameter, resize as needed. I am clumsy so i printed it at 100% infill, might not be necessary Category: Replacement Parts
Clearly evil dice box (it opens from the bottom), particularly appropriate for evil DMs Category: Toy & Game Accessories
What happens when a cute dragon meets an academic octopus? It steals the poor octo's hat! Remixed from Cute dragon: https://www.thingiverse.com/thing:1469139 Academic octo: https://www.thingiverse.com/thing:2360934
A simple dice box with screw lid The hat requires supports Category: Toy & Game Accessories
I had some surplus rgb strip, so why not use it for a duck lamp? Remixed from: https://www.thingiverse.com/thing:139894 https://youtube.com/shorts/yPut5pSl6-c
I broke several stock shrouds replacing and cleaning the fans, then i found the Quieter Ender 3 V2 Fan Shroud by iRndmz, i liked it and broke several of those replacing and cleaning the fans. Given that my fine motor control won't…
Not really a good shield but the stickman was lucky enough In picture a 10 cm tall print and a 12 cm one Category: Office
A simple frame sized to house one or more sheets of A4 paper. Bornt as a simple way to keep the grubby hands of costumers away from things, came out pretty useful as dm screen to keep tables, notes and npc sheets on the inside and maps…
The led rail came out a bit narrow, it fits 8mm strip but nothing bigger It is meant to house three pieces of strip facing outwards in the exterior ring and three shorter ones facing downwards in the radial bridges, with an usb to dip…
A modular frame to be filled with one or more sheets of paper (A4, A4 laminated or letter), useful for display purposes, as a small screen to hide stuff but mostly meant to be a DM screen fitted with easy to swap notes and tables on the…
The bulb inner diameter is about 13,5 mm, sized to fit a G4 led lamp and its socket, resize as needed. Supports required, i used rafts too since my printer likes it better Category: Household
A festive way to use leftover bits and pieces of filament. I went for minimal material (and slight transparency) with no infill and single wall for the body but the ring kept breaking apart, to avoid the problem i used cura's helper…
I wanted a life counter easy to spin and readable for both me and the opponent, this is the result. The number wheel mechanism is a slightly modified version of this https://www.printables.com/model/94892-senseis-divining-top-life-counter…
UPDATE: @dempseydiscu_2498555 resized the model to fit a 100x100mm vesa mount and kindly shared it back so now there is a new size available The ‘base’ fits a 75mm vesa mount (M4 screws), the ‘cables’ has a number of holes that should let…
A mana counter with replaceable color cap. In late game i have a tendency to mess up counting mana in multicolor decks so i made some of these to keep it straight, the other players won't love you for the time spent turning little wheels…
This roll holder is meant to fit a 30 cm (11,8 in) shelf with 9 mm (0,35 in) holes 4 cm (1,57 in) apart, also known as my own shelf. If somebody would like a different arrangement send me the measures and i'll edit it. There are two sets…
Not a real salt shaker but a real life counter Double faced for easy reading from both sides of the table The one in picture was meant to look like the real thing so i printed the outside in transparent and the inside in white (results…
Yes, i bought one of those very nice big spools by a big filament brand for little money. No, it did not fit on my ender's spool holder. The spool i have is 100mm wide, i made the support a bit wider, just in case, the drum is sized to go…
This is a simplified version of https://www.thingiverse.com/thing:3021811 with holes sized to fit magnets of diameter 1 cm and thickness 1 mm, basically because i had a bunch of those lying around. The bottom hole of the rotor is slightly…
I liked a lot the sewing box but i don't trust glue, so i tought ‘screw it!’ The modified model gives up the full 3d printability and needs to be kept together through a number of M3 countersunk screws, precisely: 32 M3x12 2 M3x25 5 M3x8…
A small box sized to fit the squared hole in the vw polo 6th series central tunnel, done mostly for places where leaving exposed change in the car can cost a window. The lid hinges on two couples of 1cm (diameter) by 1mm (thickness)…
I noticed that in the original life counter the digits were readable enough but could be better and the notches marking the current position went from poorly visible to completely invisible depending on filament color and lighting, now…
I broke one of the small green pins and couldn't find a replacement so i made it, in the picture a surviving pin and the replica side by side. Fits well enough, time will tell if it is also sturdy enough Print Settings Printer Brand:…
A simple deck box sized for 100 single sleeved mtg cards, suitable for printing with davinci jr 1.0 (pla 0,4 nozzle) The box should be printed with supports for the lid's rail and the costumizable circle on the front Category: Toy & Game…
Allows to mount a google home mini to a 75 mm vesa tv, it's meant as an accessory for the vesa cable box (https://www.printables.com/model/254217-modular-vesa-mounted-cable-box) but can also be used standalone. The level bar should be…
Why die for the Emperor when you can drink for the Emperor? Category: Kitchen & Dining
Not exactly multidimensional but still quite roomy, i sized it to hold new unsharpened pencils so the result is a bit on the big side. Two compartments one in the leg for pens, pencils and general oblong stuff, another in the hat for…
The first time one of these broke i replaced the drum, the second time i decided to do something sensible about it. If your printer has a broken gear every page will jam right after reaching the drum and when you open the panel and remove…
A remix of Lucy (https://www.thingiverse.com/thing:24255) with a cavity, sockets for up to five 3mm leds and a small hole in the back, i lit it on batteries and used the hole to fit a switch but you could also use it for a power cord if…
A simple openscad script that generate handles according to some parameters. The options are explained by comments in the script itself, but for a quick recap you can decide: - the length and radiuses (both ends) of the handle - if you…
A collection of mixed thingies, can be used to count health points, bennies, scores or anything you feel appropriate. Mostly done to try and practice a bit with modeling, i'll probably keep adding every now and then At the moment the set…
I had one broken end stroke so i made a replacement, it is sized to let through the original 6 mm bolt and fit the relative nut inside (all quite comfortably) I used petg and 100% infill since it was the toughest stuff i had around and by…
Update: added a script with horizontal and vertical offsets for the holes, in case dead center isn't what you need I kept hanging hangers on my wardrobe's handles and in time i scratched holes in it so i printed those to cover the damage…
These are all currently available results.
