Counting matching models…
Gridfinity refined (at least in my humble opinion) … Gridfinity Specification Gridfinity is a set of guidelines and standards, created by Zack Freedman. The general guideline is that everything is a multiple of 7. Baseplate grids are made…
I am asking for your help. If you see problems with this aggregation, then please leave me comments. If you think all is pretty good, then please click the “like” button or leave me comments as well. Thank you in advance. This is intended…
For those that have problems holding groups of playing cards in their hands. This design should fit in a 210 printable area. If you need a larger size, simply scale it in the slicer.
Simple “print-in-place” wallet to hold your Ninetendo Switch cartridges. 3 different models holding 8, 18, or 24 cartridges. Printing PETG no supports
Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…
These models and pictures assist in creating accurate models that marry with a 4040 extrusion. 4040 Extrusion Side Tray Sample End Plug Sample
Easy to print hitch covers. A blank template is included so you can add your own designs. A simple latch is included to keep everything in place. Other Hitch covers Printing PETG or better No Supports Orient with face up Suggest using…
Bowl that fits on smaller printbed (210x210 should work just fine). It still takes a long time to print, but it is really nice. If needed just scale it down a bit. Printing Supports are required. Tree or organic supports work really well.
There is a newer version of this model: https://www.printables.com/model/856037-another-set-of-chess-pieces
Fruit fly (gnats) trap lid for small canning jars. Mix up a 50/50 mixture of apple cider vinegar and water. Add a couple of drops of dish soap. Printing Orient model such that cones are sticking up.
This model is designed to test several different aspects of your printer's calibration. If there are problems, then you need to take measures to adjust the slicer settings or printer calibrations as needed. So, what are you measuring? The…
Provides several different gridfinity bins/widgets that can be used to create desk-valets or pocket-valets. While these should work well with almost any gridfinity baseplate they are designed to work best with the “ Gridfinity Refined ”…
Case to hold seven vials and associated single use syringes. This is print in place. Each vial is approximately 20mm dia. x 39mm high. Syringes are BD 1ml TB. Printing No Supports Change History 2024-02-15: Provide space for 39mm tall…
Dimensioned to better follow the Staunton guidelines. King is 75.5mm tall. Built-in weighted. There are subtle hints built into the pieces to help those just learning chess. For instance: King - eight shallow divots signifying the limited…
When you have LOTS of cards in your playing hand (for games such as UNO no mercy), this holder has 3 tiers.
Phone case for the Samsung Galaxy S24 FE. Print using TPU. Orient the model so the opening is up.
Simple model that can be printed and assembled with no glue. This was used as part of a fundraiser for “Homes for Heros”. Printing No Supports Lightning Infill 20% Print the following quantities: 6 Window Panes (laying on their backs) 6…
Modular system for creating covers for electrical wall boxes. STL and STEP files have been provided such that you can put whichever components together to create an electrical box plate cover to suit your needs. Simply pull either the…
The Canon EFS 18-135 Lens is a very good lens, but it does not come with a hood. I tried several different models that others had posted, but none seemed to fit the bill, so I made my own. This model is reversable so it will store well.…
Use these parts to create a marble run for 10mm marbles. The tracks and other components are compatible with Lego building blocks. But you are not restricted to using Lego compatible blocks. There are parts specifically for joining the…
These are gridfinity bins/widgets for organizing 3D printer tools. They can be used with any gridfinity baseplate, but these take full advantage of the “ Gridfinity Refined ” baseplates. Change History: 2023-03-09: Upgrade all bins to the…
Designed in conjunction with https://www.printables.com/model/823478-chess-pieces-for-beginners this is the follow up pieces that have now lost the lower boarder with the movement hints. Other Models…
This is a 3rd order Hilbert-Curve that is a byproduct of the work I did on several Hilbert-Curves for a Marble Run Challenge - Lego Compatible set of models. Printing No Supports 3 Walls 3 Top and Bottom Layers Lightning Infill
This is a print that I did for someone as a joke. If you remember the “Night at the Museum” movie there was a Moai statue that continually called the night guard a “dum dum”. Printing No Supports This print used Prusament PLA Marble Grey
Inspired by an orange peeler that we used to have years ago. Printing PETG
Foam Board hybrid RC plane designed to help teach my grandchildren how to fly (interpret that as strong but it won't bother me if I have to make multiple). It has an under-cambered wing, so it is a slow flyer (which is also good for…
Wonder Woman Logo/Shield This my second (okay maybe the fourth or fifth) attempt at creating a nice looking Wonder Woman Logo/Shield. There are four sizes: 200mm, 150mm, 220mm, and 280mm. All have a tiered approach (where each tier is 3mm…
Provided here is a set of parameters (and their associated macros) that will allow you to create a parametrically controlled Lego compatible brick design that can be easily 3D printed. And it even meshes well with the real Lego bricks.…
Simple three gang switch plate cover that hosts three normal toggle switches Printing Orient Face-down No Supports History 2023-07-19: update to use my Modular solution 2023-07-05: Fix spacing
1 gang box cover hosting 1 standard electrical outlet. Printing Face down No supports History 2023-07-19: update to use my Modular Model
This is a vase-mode (single-wall) print for a ceiling air vent. Just take some magnets and stick it to the vent. I have even printed this using LW-PLA to make it super light. Slicer Settings Wall Line Count: 1 Top Layers: 1 Bottom Layers:…
3 gang electrical switch plate cover hosting 3 rocker style switches Printing Orient Face-down No supports History 2023-07-19: update to use my modular solution
Quick print for calibration of X-Axis, Y-Axis, and Z-Axis. Three models are included, two 60 mm and one 30 mm. Before using one of these prints you should first make sure your bed is trammed (leveled), your e-steps are calibrated, and…
The 60mm Exhaust Fan Silencer Flowmaster is a much better fan silencer.
A newer version of this model is available: SD Wallet Mk2 Print in place SD Card Wallet. Four different sizes for holding: 12, 8, 6, and 4 SD-Cards. No supports. Inspired by SD Wallet by Darazsweb , and by NupsDesigns but I wanted…
Simple model to identify tolerance issues for your printer.
2 gang cover plate hosting 2 standard electrical outlets Printing Face down No supports History 2023-07-19: Update to use my Modular model
Simple Bat earrings that complement the rather gaudy Bat medallion https://www.prusaprinters.org/prints/84200-bats-medal Two editions are included: Hoop - can be printed as solid black or as two filament or as solid light color and then…
Blank Cover for 1 gang switch box Printing Orient Face-down No supports History 2023-07-19: update to use my Modular solution
Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…
2 gang electrical box cover hosting rocker switches Printing Orient Face-down No Supports History 2023-07-19: update to use my Modular solution
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
Stem for 5cm Spiral Vase Rose with bottom by lytta. It has three different parts: “Leaves”, “Receptacle”, and “Stem”. Printing I printed all of the parts with 3 walls, 3 tops and 3 bottoms using lightning infill. I used a heat gun (a hair…
This is a folding stand for a portable (wireless) monitor (or tablet). When not in use, the stand folds almost completely flat. There is a ridge at the leading edge of the base to retain the monitor. There are three parts: the base, the…
Print-in-place wallet to hold and organize your SD cards. Simple to use. Several different sizes for different numbers of SD cards, including: 4, 8, 12, and 18. Inspired by SD Wallet by Darazsweb , and by NupsDesigns but I wanted…
Simple Q-Tip Holder that can be printed with no supports. I printed this using a wood-pla filament. I have to admit that I am no longer using the “lift”. It was just too hard to load the Q-Tips. Printing No Supports History 2023-11-20:…
Inspired by Hogwarts of Harry Potter fame, this is a muchly simplified version. Being used as a centerpiece for a fundraiser. Printing No Supports Lightning Infill Takes about 7 hours to print (at least on my printer) :-)
A simple model that helps support a droopy hot end wire. Printing No supports Orient “whip” on its side History 2024-08-06: Updated models to provide for a better printing experience and to shift the “Cold Base” to provide a better and…
These chess pieces are designed to assist someone wanting to learn chess. The base of each piece provides a visual hint as to the piece's allowed moves. The upper part of each piece is based on the Staunton Chess design, reinforcing to…
This is gridfinity heresy. I found that for a pocket valet the grid size of “standard gridfinity” was just a wee bit too large. This matrix is based on 35mm (which is still a multiple of 7) instead of 42mm, all remaining gridfinity…
Celtic knot cross coasters History 2021-09-06 - Slightly deeper to keep condensation away from drink bottom Category: Office
Block for holding Chef and other specialty knives. Printing Orient model face down on the print bed. 2 Perimeters/Walls 3 Tops and Bottoms 4% infill Infill type Adaptive Cubic Note: lighter weight version, but still uses a lot of filament.
Filament Spool Holder System that uses 608ZZ bearings. This was inspired by the excellent work done by HugoHuge https://www.thingiverse.com/thing:3020026 . However, it uses a different approach to a modular Filament Spool Holder that…
EXPERIMENTAL Silencer to hopefully help on those power-supplies whose fan is intake. This silencer works on the principle that the fan blades are "popping" the air. All that is needed is to block the direct sound waves coming from the fan…
Build-plate holder that can handle a wide variety of plate sizes. Printing Orient the model face down.
2 Gang Switch Plate Cover hosting 2 toggle switches Printing Orient Face-down No Supports History 2023-07-19: update to use my Modular Solution
Iron Man Arc Reactor stand for Echo Dot generation 3 This is obviously not an exact replica of the Arc Reactor from the Iron Man and Avenger movies. It does give a nice representation and is compatible with the side speakers and top…
Case that can hold up to 6 Bambu Lab A1 (or A1 mini) nozzles and hot-end socks Printing 3mf file included for using an AMS. History 2024-09-05: Slightly enlarge the friction plate on the lid to better hold it in place. 2024-09-04: Provide…
4 gang electrical box switch plate cover hosting 4 rocker-style switches Printing Orient Face-down No Supports History 2023-07-19: update to use my modular model
Simple model for holding mail on a desktop. Modeled on the traditional U.S.Mail box on your street corners. Even though it prints fine standing up, I printed it on its side so I would get stronger sides. I used supports touching…
2 gang electrical box switch/outlet cover hosting 1 toggle switch and 1 outlet. Printing Orient Face-down No Supports History 2023-07-19: Several updates and change this model to be based upon my model…
Decorations for fall, door topper
Simple double gang switch plate cover that hosts both a single toggle switch and a single rocker switch. Printing Orient Face-Down No Supports History 2023-07-05: Fix spacing 2023-07-19: update to use my modular solution
The gimbal stick-end was designed to replace the stock stick-ends for the Radiomaster TX16S which are a bit tall for my liking. I also wanted a slightly wider pad on top.
2 gang electrical box switch cover hosting 1 rocker switch and a blank. Printing Orient Face-down No Supports History 2023-07-19: update to use my Modular solution
1 gang switch plate cover hosting 1 rocker switch. History 2023-07-19: update to use my modular solution
This is a larger version of my previous side tray. Lots of handy things going in. Tray is 120 mm x 65 mm Notes: For best results print on the end with tree supports Category: 3D Printer Accessories HISTORY 2021-11-29: added second tray…
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
A stand to hold the charging adapter for the Fitbit Charge5
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
Needed a simple cup holder for the car to handle oversized cups. Two versions: one with a hollow in the middle to allow normal cups as well.
My interpretation of the Hogwarts Great Hall from the Harry Potter franchise. Enjoy! Printing Fits on a 200x200mm print bed. No Supports. Infill: Lightning 20%. 0.6mm Nozzle. There is a test print that can be used to see if the printer…
3 gang switch blank cover Printing Orient Face-down No Supports History 2023-07-19: Update to use my Modular model
Keychain for those of you that are Alabama Fans. This works best for printing with multiple colors (or doing some serious detailed painting). Start with red, white, light-gray, then black Visually similar works exist; however, this design…
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
Simple guard that fastens onto a normal household switch plate to prevent accidental position change. History 2023-07-21: reduce the height of the edge ridge. 2023-07-04: Increase the height of the guards.
Block for holding Chef and other specialty knives Printing Orient model face down on the print bed. 2 Perimeters/Walls 3 Tops and Bottoms 4% infill Infill type Adaptive Cubic Warning: Uses a LOT of filament History 2024-01-17: Was too…
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
All of the content from this model has been upgraded and moved into Gridfinity Refined (Valet) Change History: 2023-03-04: Replace this model with Gridfinity Refined (Valet) 2023-01-24: Retire this model and replace it with:…
The lock/clip in the floor to hold the floor mat in place on the Honda CRV easily breaks loose from the mat. This is a bit of a kludge but holds the mat where it should be. Printing Requires supports Use PETG or better filament
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
2 Gang Switch Plate Cover hosting 1 Toggle Switch and 1 Blank Printing Orient Face-down No Supports History 2023-07-19: update to use my Modular solution
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
This model has been replaced by a newer model: “ Gridfinity Refined (Valet) ” This is “another” gridfinity pocket/desk valet. File Naming Files are named simply: Grid indicates a gridfinity base, Bowl is a widget that has a curved…
Front "Stuff" Tray for Elegoo Neptune 2 This slides in right beside the control panel to stick stuff in. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: Yes Resolution: 200 Infill: 15 Filament: Any PLA Notes: Supports: tree…
Celtic Knot Shamrock coaster Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: Any PLA, PETG Any Category: Office
If you use some creative printing, you can print with multiple colors. These are roughly 2x2 inches. These were inspired by some keychains that I saw for sale. Grabbed the logo and imported into Fusion360. Some extrusion and offset…
For those of us that do not yet have a fully metric toolbox, I made this nozzle wrench that fits a 0.25 (¼) inch stud.
Extended side tray that augments the front tray ( https://www.prusaprinters.org/prints/84204-front-tray-for-elegoo-neptune-2 ) for the Elegoo Neptune 2
Just for fun. A set of chess pieces that are severely blocky. Printing No supports. 3 walls using 0.6mm nozzle or 4 walls. Lightening infill. My Other Chess Models https://www.printables.com/@grizzie17/collections/1448382
Simple tool to help with getting stubborn wires into an outlet/juntion box. One end has both a hook and Push-Bar and the other end can be used to twist the wires or convince the wires to move sideways. Inspired by a wooden creation that…
Door topper with some gourds for fall decorations
Holder for your dominoes during those long, hot competitions (snicker). There is also an extended slot in the back of each row for holding cards.
The Wyze Battery Spotlight Camera contains a wall mount. There is a special mount that is available from Wyze for ceiling mounting. This model allows you to use the existing wall mount but adapt it to a ceiling mount. Printing Orient the…
Handy holder for the passenger to store their phone when it is not in use. Hangs on the lip of the center console. It will fit two phones, depending on their thickness. Printing Use PETG or better. Print hook on side (and then glue into…
Simple camera mount for the A1. The supplied adapter will handle the Wyze Cam v3. Simple print then slide the parts together and the camera into adapter (upside down). Then slide onto the end of the filament cut trigger on the right side…
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
Simple cellphone holder that clips onto the passenger side of the center console for a Honda CRV. The cup holders are almost always occupied. So, we needed a safe place to put the passenger cellphone. Printing Everything should print…
![60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others](https://media.printables.com/media/prints/84197/images/897846_4f0b8151-b2a0-429d-981c-156618d23e1b/fan_flowmaster_2.png)
