Counting matching models…
I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…
Fred the Frog model: https://www.thingiverse.com/thing:4838220 I've also added a connector between the legs and the body and a chamfer near the back of the hat to make it more printable
Bucket 👍 I recommend printing this with 0.2 layer height, 10% infill, 4 walls, and with tree supports. Normal supports work too but tree supports were very easy to remove for me. Edit 5/29/22 Added top and bottom files if you want to…
I found that the original model was very small, rotated, and not flat on the bottom, so I fixed all of that in this model so printing is easier You won't need supports for the model if you are printing them small Remix of…
Thanks to Psych0o on Thingiverse for the design and including the STEP file. I've simply modified it to support M3. https://www.thingiverse.com/thing:4565701 Here is the original design that supports M5 25-30.
I wanted to print this as a gift but I didn't want the Apfelfunk badge on it, so I used Tinkercad and Blender to remove the badge. I just used Tinkercad to shorten it down because I thought I would be able to completely remove it, but…
Print at 0.2mm layer height, 3-4 walls recommended It isn't the tightest fit so you might have to use glue The original model now has versions of the parts with taller lips which should eliminate the issue and this likely won't work with…
Also they are stl files now I can't even remember how I got them to be stl files as they have been just sitting on my computer and I had to make them 94000% bigger So yeah and they're ready to print I'm not including the insert because I…
I recommend printing at 10% infill to make sure the back of the model isn't too heavy The cord will be strained at the bottom, but it is hard to avoid it to keep the design of the model Depending on your printer, the charger may be hard…
*This is for the 2016 iPhone SE This iPhone case by Helmi74 has been modified to show text depicting "OMG OMG this ia awesome 4" in the middle of the case, and "Origami?" at the top of the case. This…
Print upright with supports at 0.12mm or 0.1mm layer height. I used 7 walls and M3x18 screws to install it I got it right first try so it's not the greatest fit, if I were to do it again I would consider improving the fit on the side…
Print with 0.2mm layer height with 100% infill. You can print this by: Using STL file, filament change before 4th (tan or white) and 7th layer (orange) Using 3MF file, use different colors for each bit Original SVG base at…
These are all currently available results.
