P
PrintablesCrambambuli
Sliding Holder inspired by commercial
Use VHB Tape or screws to connect it to surfaces. Original Length: 100mm Short variant : 70 mm
- Downloads
- 9,178
- Likes
- 5,728
- Rating
- 4.89
All models
Counting matching models…
P
PrintablesCrambambuli
.22LR Ammo Box
You can also reuse the sellier & Bellot inlay.
- Downloads
- 2,397
- Likes
- 428
- Rating
- 4.93
P
PrintablesCrambambuli
Speed Loader for Ruger mark 3 & 4 v6 (old design)
How it works: https://vimeo.com/544208321 This is the 6 version of my speedloader. It has many new features: the cartridges does not fall out when the magazine is not inserted it is suitable for smaller printers there is the possibility…
- Downloads
- 1,382
- Likes
- 193
- Rating
- 4.67
P
PrintablesCrambambuli
Jabra evolve 65 joint fix
E_Tech 14 made an awesome jont fix. I took his design and made it even better.. now it can be printed much easier. The design is also optimized. update: both sides Remix of: https://www.thingiverse.com/thing:4724194
- Downloads
- 1,258
- Likes
- 72
- Rating
- 4.62
P
PrintablesCrambambuli
Sliding Holder inspired by commercial but super flat
Use VHB Tape or screws to connect it to surfaces. Length 122 mm Thickness 3mm Print in PETG for better results.
- Downloads
- 1,194
- Likes
- 848
- Rating
- 5
P
PrintablesCrambambuli
Voron V2.4 300^3 C920 gantry 2020 mount
To assemble you need a M3x8 Screw and an M3 Insert. Update: new File “topRound” for those who wants to try it out. (request from comments) Disassembly instruction: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
- Downloads
- 1,184
- Likes
- 177
- Rating
- 4.92
P
PrintablesCrambambuli
Better ruger mk 4 racker mark IV
VERY IMPORTANT : ! print it in standing position. if you print it lying you will break it sooner .. layer separation! ! it is possible that you need to scal it up to 103% to work ! :) maybe Print both variants at once… Twist it on instead…
- Downloads
- 940
- Likes
- 82
- Rating
- 5
P
PrintablesCrambambuli
Aluminium Profile 2020 slot cover flat
Adjusted to print with max 0.6 nozzle in vase mode Category: 3D Printer Parts
- Downloads
- 742
- Likes
- 76
- Rating
- 5
P
PrintablesCrambambuli
Voron V2.4 Side skirt mod for noctua Fan NF-A6x25
This is a mod for my Voron 2.4 Category: 3D Printer Parts
- Downloads
- 641
- Likes
- 111
- Rating
- 4.55
P
PrintablesCrambambuli
ruger mk 4 racker mark IV
perfect fit Category: Outdoor & Garden
- Downloads
- 501
- Likes
- 50
- Rating
- 5
P
PrintablesCrambambuli
Square keys
Common keys to open most things in public spaces. 6.3mm 8.3mm and triangle
- Downloads
- 401
- Likes
- 145
- Rating
- 5
P
PrintablesCrambambuli
Voron 2.4 heated Chamber with Fans
This mod allow you to install two additional Fans under the bed. I am getting about +10°C 4x M3 Inserts.. to mount the Fans. (Voron BOM) 2x M3x8 (Voron BOM) 2x T-Nuts for 2020 Aluminum Extrusion (Voron BOM)
- Downloads
- 358
- Likes
- 95
- Rating
- 5
P
PrintablesCrambambuli
Olight Baton 3 stand
I made this model without knowing that there is a “olight L-dock kit” on the market. :) https://www.amazon.ca/OLIGHT-Dock-Works-Seeker-Compatible/dp/B07QWSDRZD myine is nicer because the charger is integrated….and cheaper dual version…
- Downloads
- 353
- Likes
- 74
- Rating
- 5
P
PrintablesCrambambuli
Ruger 10/22 picatinny adapter
Picatinny adapter for ruger 10/22 (tried out with takedown version) Version 4 ist what you can see. Version 5 is what i am working on.. not yet tried out. X.2 means that there are 3 outtakes The holes are to small and you need adjust them…
- Downloads
- 338
- Likes
- 65
- Rating
- 5
P
PrintablesCrambambuli
Ruler (max 30mm) gauge postioning and angle block
Found this nice tool on AliExpress. https://a.aliexpress.com/_EQpYTXP ..and made a less precise but better plastic version of it. If you like the tool and want more precision .. buy it. Versions of this tool: Luxus Versions with magnet…
- Downloads
- 335
- Likes
- 110
- Rating
- 4.67
P
PrintablesCrambambuli
Holder with Handle for Ammo box 5.56, 5.56×45mm NATO
Long ago i made Ammobox for 5.56x45 NATO. https://www.printables.com/model/85281-sig-550-ammo-box-556-556x45mm-nato-strip ( I updated also this models) Now you can have a Handle to Carry 3 Ammo boxes (150 rounds) or 6 or even more boxes…
- Downloads
- 319
- Likes
- 76
- Rating
- 4.5
P
PrintablesCrambambuli
Foldable Coat Hanger tester
Simone Giertz had this Idea of a Foldable Coat hanger. I was not convinced that this Idea is good so I modeled simplified version of this thing and tested it. In my opinion this is not a revolution.. it doesnt work for jeans and thicker…
- Downloads
- 317
- Likes
- 116
- Rating
- 5
P
PrintablesCrambambuli
Ammo box 100x 5.56, 5.56×45mm NATO
My stackable ammo box just bigger
- Downloads
- 264
- Likes
- 26
- Rating
- 0
P
PrintablesCrambambuli
Olight Charger dual Flashlight holder (front indicator)
Olight Baton 3 pro dual Flashlight holder (front indicator)..just that
- Downloads
- 262
- Likes
- 32
- Rating
- 5
P
PrintablesCrambambuli
Olight Charger single Flashlight holder (front indicator)
Olight Baton 3 pro single Flashlight holder (front indicator)
- Downloads
- 260
- Likes
- 30
- Rating
- 5
P
PrintablesCrambambuli
Kotwica - Znak Polski Walczącej
Wikipedia: The Kotwica (; Polish for "Anchor") was a World War II emblem of the Polish Underground State and Armia Krajowa (Home Army, or AK). It was created in 1942 by members of the AK Wawer Minor sabotage unit, as an easily usable…
- Downloads
- 218
- Likes
- 13
- Rating
- 5
P
PrintablesCrambambuli
Sliding Holder inspired by commercial (tiny version) 40x40mm
Tiny version ( 40x40mm) of my slider
- Downloads
- 213
- Likes
- 63
- Rating
- 0
P
PrintablesCrambambuli
TS100 Case with holder
new hinge. → You can now put the case flat on the table. Made a holder. Push down to lock the holder. Bearing : cheap 608zz, 608Rs… remove covers and degrease the bearing to reduce heat transfer .. It you will melt the holder Use filament…
- Downloads
- 196
- Likes
- 51
- Rating
- 4.5
P
PrintablesCrambambuli
Xiaomi G11 Vacuum Cleaner accesories
Different types of adapters and nozzles for Xiaomi G11 Vacuum Cleaner Update: there is alternative version of the adapter with axis made of filament Update: added gen2 of my nozzle with spikes because my wife love them Update: Added…
- Downloads
- 157
- Likes
- 30
- Rating
- 0
P
PrintablesCrambambuli
Post It Note Holder 9x9x10cm
Post It Note Holder 9x9x10cm Category: Office
- Downloads
- 139
- Likes
- 27
- Rating
- 3
P
PrintablesCrambambuli
Whoopstor & Toothstore BT2.0 Battery case
Storage for 24 1s 300mAh BT2.0 batteries with integrated Whoopstor v3. ..or 12 450mAh Batteries and the Toothstore. To build this you need one M3x8 and an M3 insert (voron standard). Print without support. (2024.04.03 Modell has been…
- Downloads
- 127
- Likes
- 19
- Rating
- 5
P
PrintablesCrambambuli
Air Filter Rear Panel Mounted Re-circulating Activated carbon + HEPA
Here is my take on AirFilter for Voron 2.4 and other Printers: 2022.4.03 Update: new adapterplate V2.stl You need: 2x 5015 blower fans (confirmed fitment with Winsin brand, but same as used in nevermore micro) 16x 6x3mm magnets (same as…
- Downloads
- 120
- Likes
- 27
- Rating
- 0
P
PrintablesCrambambuli
XH-M240 Housing
Couldn't find decent housing for XH-M240 so I made one for us 3-5 guys. :) This thing is used to test capacity of 18650 batteries and to discharge batteries to specific voltage (3.7V for example) to store them properly. To assemble this…
- Downloads
- 109
- Likes
- 5
- Rating
- 5
P
PrintablesCrambambuli
Quick-Release Belt Clip for EDC (Victorinox+Olight)
Very robust and secure design. I made many iterations to optimize it.
- Downloads
- 88
- Likes
- 20
- Rating
- 5
P
PrintablesCrambambuli
FPV 3.5" Drone box
To enhance my FPV drone experience, I designed a custom box to carry my GEPRC Smart35 drone, equipped with a Thumb Pro camera, along with spare parts. Storing the drone in a backpack was inconvenient, so this box improves portability and…
- Downloads
- 86
- Likes
- 19
- Rating
- 5
P
PrintablesCrambambuli
Housing for Raspberry pi Zero with USB-A addon board v1.1
Housing for Raspberry pi Zero with USB-A addon board v1.1. good fit. Category: Electronics
- Downloads
- 82
- Likes
- 8
- Rating
- 5
P
PrintablesCrambambuli
Handle for picatinny gun flashlight
Inspired by the First-Light- t max i made a handle for my Olight Valkyrie PL-1. Version 1: main27 with handle diameter 27 Version 2: main with handle diameter 22 for rubber handle Category: Sport & Outdoors
- Downloads
- 79
- Likes
- 22
- Rating
- 0
P
PrintablesCrambambuli
Housing for Raspberry pi Zero with USB-A addon board v1.1
Works good. Category: Electronics
- Downloads
- 70
- Likes
- 7
- Rating
- 5
P
PrintablesCrambambuli
Experimental tiny V6 chamber heater
This design works but has been not testet properly. Please be careful. If you are not sure what you are doing.. dont do it!! You can burn your house down and kill people. IMPORTANT DETAIL: NO GAP between HOTEND and HEAT SINK!! Hot end…
- Downloads
- 61
- Likes
- 32
- Rating
- 0
P
PrintablesCrambambuli
Container box for Waffenfett/Automatenfett Swiss StGW90 SIG550
A mostly perfect copy of the original cleaning and lubricant accessories for Swiss Military Riffle.
- Downloads
- 55
- Likes
- 5
- Rating
- 4
P
PrintablesCrambambuli
BambuLab spool 2 Masterspool sleeve
The inner ring diameter for the filament coil is 102mm (refill standard) https://richrap.blogspot.com/2018/01/masterspool-proposed-standard-for-3d.html
- Downloads
- 39
- Likes
- 3
- Rating
- 5
P
PrintablesCrambambuli
Doorstopper House 11-15mm
Door stopper house ... Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PC Grey Notes: Any material does the trick. Category: Household Supplies
- Downloads
- 36
- Likes
- 4
- Rating
- 5
P
PrintablesCrambambuli
Hole calibration with bearing, filament...
A calibration part to calibrate the printer with a 608 bearing
- Downloads
- 34
- Likes
- 11
- Rating
- 5
P
PrintablesCrambambuli
Sealed Creality Filament Box
The idea was to reuse filament cardboard and bag to build a sealed filament container that is easy to open and close. You need: Creality filament box O ring seal 4mm diameter ( AliExpress) 4x M3 inserts (voron standard) 4x M3x40 screws…
- Downloads
- 33
- Likes
- 9
- Rating
- 0
P
PrintablesCrambambuli
Nevermore Activated Filters - Micro Edition - Mod
The mod allows to change the carbon without unmounting the bed and position the filtre on the back. The idea is to place the filter on the back and let the air flow under the bed. Original Designer:…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesCrambambuli
Handle to convert a Dumbbell in to a Clubbell
If you need elbows rehab or you want do train your arms to be a better pistol shooter or else... You can convert a typical dumbbell in to a clubbell.
- Downloads
- 29
- Likes
- 10
- Rating
- 0
P
PrintablesCrambambuli
Batterybox Whoopstore 1s
This is gen 2 of my whoopstore battery holder. The appartment next to Whoopstore is for used batties .. but it is not that practical.. please comment and suggest updates :)
- Downloads
- 27
- Likes
- 7
- Rating
- 5
P
PrintablesCrambambuli
Nexus 5 Table Stand with Wireless Charger mount Updated
Holder for Nexus 5 with Wireless Qi Power Charger Pad http://www.amazon.co.uk/dp/B00FEAGVWM with and wihtout flipcase. better stability of the Nexus 5 in the holder by rounded bottom better stability ot the stand by lower position of the…
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
PrintablesCrambambuli
Parallella Case
Case for Parallella 99$ Supercomputer. :) https://github.com/abopen/parallella-open-case Category: Electronics
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesCrambambuli
Shower Soapdish Remix with STEP
Made the dish smaller and adjusted the diameter of the rod to 18 mm. Added step so you can adjust the diameter. It was recovered to parametric witch freecad. You need to use the classic M3 Voron insert. Aliexpress - M3x5x4 (Voron…
- Downloads
- 19
- Likes
- 7
- Rating
- 0
P
PrintablesCrambambuli
Dyson Hairdryer holder wall mount
Mount for the new dryer.. 3 versions
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesCrambambuli
EMAX Babyhawk 2 / O3 - DJI O4 lite Adapter 25°
Adapter for O4 lite Emax Babyhawk 2/ o3 lite 25°
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesCrambambuli
DJI RC-N3 Tablet 10" Mount
Inspired by mounts on Aliexpress I designed my own version for my 10" Ipad. You need : 2x M3 inserts 2x M3 screw 18mm 1x M3 screw 35mm ( or just use aprinted pin ) STP files.. if you need longer or shorter version, ask me or adjut the…
- Downloads
- 14
- Likes
- 7
- Rating
- 0
P
PrintablesCrambambuli
Xiaomi Vacuum G11 Accesory holder
Xiaomi Vacuum G11 Accesory holder. Additional accesories in my collection.
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesCrambambuli
GepRC Smart35 Thumb pro camera mount
Thumb pro mount for smart 35..
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesCrambambuli
Speed Loader for Ruger MK3-4 & Browning Buckmark (v6.5)
If you are using browning or both types of mags go with 6.5. (Ruger & Browning) If only Ruger and Rail go with 6.4. (Pocket Version) If you also want to use box for loose ammo go with 6.3. 2026.02.10 Ruger &!! Browning Buckmark 22 LR…
- Likes
- 51
- Rating
- 5
These are all currently available results.