Counting matching models…
I found this filament clip I really liked - but after using it a while noticed it always took me a second try to fit the filament in. So tried and opened the bit by 6 degrees so the fila finds in more easy.
IKEA hatte für kleines Geld Edelstahl-Stangen, die man unter die Oberschränke schrauben und tausend Sachen daran hängen kann. Kungsfors. Es gibt auch Erweiterungs-Haken dafür, aber im Lockdown ist's nicht so bequem heranzukommen. Hier…
this clip holds an led strip at the wall. It has been modelled for an WS2812b strip that is in a silicon tube. the tube measured 12mm x 3.6 mm, the clip leaves even a little more space so the strip goes in without use of force. They are…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament before the details - layer. then start…
Really like the wheel from TheSloppyApprentice's Watermill and was looking for ways to hold it besides that large frame in the source. So I could make it stand in a bassin or hang under some opening where water is dropping off. So here…
It's my take on a cuboid stand for a globe, based on https://www.thingiverse.com/thing:2818901 but built from scratch. I included two models of different sizes, both with a thickness of 15 mm and leg length of 60 or 70 mm respectively. A…
A printed drawing that creates the image of Pablo Picasso's sketch of Don Quixote and Sancho Pansa. This is meant for 2 color printing. The base has 0,52 mm and then the drawing follows with 0,4 mm. Slice it with a layer height of 0,2 ,…
This part is compatible to the holder models at Water Wheel Holders - Wasserrad - Halter It is a rebuild of Watermill , but smaller in both dimensions at 30 mm radius and 32 mm width. A longer axis is supplied here at 50mm (which works…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
The first version published here is a rather minimal case with a surprisingly effective diffusor for one of those quadratic LED matrices you can get on Aliexpress with 256 WS2812b LED on it, 16 rows a 16 lights, spaced in a 10mm raster. A…
Building boxes and containers from hexagonal meshes and collecting them here (No more: As I experiment with it I'll add new things one by one.Therefore set it to WIP now) The meshes themselves are created by an parametric openScad file…
This is a nozzle that can be screwed on a toothpaste tube in place of it's cap. Not realy useful when you still have toothpaste in the tube but it can be used if the tube gets a second life and is used to hold and dispense other liquids…
A funnel that fits into a bottle and a sieve which snuggels into the funnel's cone. Fast print in spiral ‘vase mode’. I did it in TPU for haptic and durability, set line width to 0,5. The opening is 60mm while the small part has a…
This is a remix, or more precisely, a small addition to the wonderful “Miniature Chinese Pavillion” by beardofzeus. I added those models in a .zip here for convenience but changed none of it, all the kudos goes to the original designer.…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
So the project is to create a compact controller for a led strip which realises a night light . For this it needs to detect motion with a PIR sensor. Next the controller should know if its bright or dark and only add light when dark. So a…
This is an ongoing theme, water wheels powered by overflow when watering the plants on my balcony. I made a few things earlier, among them steckhalter-fur-wasserrad-30x32 and water-wheel-and-holders . Basic dimensions from there apply…
'Saint Javelin' Сент-Джавелін is depicting a Virgin Mary holding a Javelin, an American-made portable anti-tank missile system. It has become an icon of Ukrainian resistance to the invasion by it's northern neighbour Russia. The image is…
This is in fact a remix of https://www.thingiverse.com/thing:3850237 but Thingiverse doesn't support adding a thing as the ressource any more, at least for me. The parent did a wonderful job but I never really figured out how to screw the…
My printer had begun to vibrate noisily and shake my desk so I tried to quiet it by adding dampeners, something TPU could be useful for. Searching around I found things which I liked partially, the dampener body on one, the feet on…
Little slides that go into the middle rail of an extrusion and serve to attach something to it. Like, when you want to attach something to the x-gantry, a hook to hold the cable tube up, or a cam. One has a M3 screw hole so you can fix…
The use case for this stand is to hold the laptop up on my chest while I lie in bed and avoid getting cramps in my hands trying to balance it manually. This is my second take on the topic, ( v1 ) V2 is more lightweight and flexible. It…
This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…
Nichts Spektakuläres, einfach ein Ding, was ich brauchte und mit 3D-Drucken kann ich mir solche Sachen selbst machen. Trichter, um Mahlgut in Gläser zu füllen (ohne dabei ringsum was zu verstreuen. ) Gemahlenen Kaffee, Kräuter für die…
a simple box to hold an Amica nodeMCU (v2) Category: Electronics
This is part of a project to create a fountain for balcony or indoors. The module consists of a circular basin with an excentric vertical column which fits into the opening of another such element. Printed in TPU this connection is stable…
This little box houses a D1 mini (a clone) and is spacious enough for cables and Dupont-pins. it has an opening for an usb cable though in the photo you see a setup where it draws it's power from the 5V that also power the led strip which…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
A soap dish designed from cylinders and spheres. The pattern reminds of islamic desoratives. Diameter is 111 mm, height goes from 7,5 mm at the edge to 2 mm at the center. Thanks to tecnoloxia_org for inspiring art.
This is meant for 2 color printing. The base has 0,4 mm and then the drawing follows with 0,4 mm on top. Slice it with a layer height of 0,2 and insert a Change filament before the 3rd layer and thus you can print it black on white or…
Ein Untersetzer mit 9,6 cm Durchmesser - passend für einen Bierseidel oder Saft-, Teekanne. Ich hatte bei der gestaltung TPU m Sinn aber es sollte mit allen Materialien funktionieren. Schreib 'ne Nachricht falls eine andere Grösse…
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
Ein Untersetzer mit 9,6 cm Durchmesser - passend für einen Bierseidel oder Saft-, Teekanne. Ich hatte bei der Gestaltung TPU m Sinn aber es sollte mit allen Materialien funktionieren. Schreib 'ne Nachricht falls eine andere Grösse…
This is meant for 2 color printing. The base has 0,4 mm and then the drawing follows with 0,4 mm on top. Slice it with a layer height of 0,2 and insert a Change filament before the 3rd layer and thus you can print it black on white or…
This is a variation of the board-hooks in Steckhaken and Steckhaken (breit) so it's designed to fit on a board 19mm thick. (Drop me a message if you need it in another size). But there's no hook here but holders for a watermill and the…
It's been secretly bugging me that there was not a single model with an Apsara (at least search found none). Now I discovered how easy it is to create a lithophane with FreeCAD and voila! - here we go. I took the picture in Angkor Wat…
Ein Untersetzer mit 9,6 cm Durchmesser - passend für einen Bierseidel oder Saft-, Teekanne. Ich hatte bei der gestaltung TPU m Sinn aber es sollte mit allen Materialien funktionieren. Schreib 'ne Nachricht falls eine andere Grösse…
The model is meant for 2 color printing with a single extruder, you change the filament at a certain height. The base has 4 mm and then the drawing follows with 0,3 mm. Slice it with a layer height of 0,3 mm. and in the slicer insert a…
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
This case houses a nodemcu v2 'Amica', a 0.96" OLED display and a BME280 sensor. The latter gets slipped into a pocket which is easy to seal off with a little elastic gum so the measurements are a bit less influenced by the controler's…
This is a remix of prior work . From one of the sources I took the crossbar and having both sides of the stand in the same size, from the other source I took the smaller claw to hold the fine Macbook Air edge. I created an updated version…
A box to house a MosFet, designed to prevent on/off contacts by a): a lid held with 3 M2.5x6 screw which secures the in- and outgoing cables on the 'work' - side b): the case is long enough to keep the dupont-pins inside the case which…
For some reason I like her smile the best. Thousand years apart though. 43,6x101,18mm, 0,3mm base Category: 2D Art
They say it represents Shiva. And clearly it represents the fundament of our being, the duality of male and female. I saw those in many hindu temples, one in Angkor Wat standing under an opening so the rain would fall on the lingam and…
This is a new go for a thing I made before: a key holder with a pocket for those keychain tags that have an RFID chip. RC522, https://de.aliexpress.com/wholesale?catId=0&initiative\_id=SB\_20191111162102&origin=y&SearchText=RFID+Kit+RC522…
This is 2d-Art. There is a 0,4mm base and 0,4mm drawing printed on top. It is meant to be printed with 0,2mm layer height. Slice it in Cura or superslicer, prusaSlicer and configure a Change filament after the second/before the third…
This needs to be printed in a flexible filament, I designed it for TPU. Unlike many door stops that under the door to stop it's movement this design goes into the corner between door and frame which only opens when the door is open. The…
Soapdish - Seifenschale, 120 x 90 mm, ellipsoide Mulde, Muster Asanoha (Hanfmuster) Thanks to tecnoloxia_org for inspiring art.
A printed drawing that creates an image of a woman with a pidgeon in Picasso style. This is meant for 2 color printing, you change the filament at a certain height. The base has 0,5 mm and then the drawing follows with 0,4 mm. Slice it…
A printed drawing that creates an image of a heraldic dragon. This is meant for 2 color printing, you change the filament at a certain height. The base has 0,5 mm and then the drawing follows with 0,4 mm. Slice it with a layer height of…
The model is meant for 2 color printing with a single extruder, you change the filament at a certain height. The base has 4 mm and then the drawing follows with 0,3 mm. Slice it with a layer height of 0,3 mm. and in the slicer insert a…
There are plenty of toilet paper holders on thingiverse but I still designed a new one since I wanted to attach it to the side of a heating radiator which is conveniently near to the seat in my bathroom. I tried ways to attach things to…
The challenging part of this thing is how tiny the details of the printed drawings get when scaled down to fit on the bookmark. No way to get it right with a linewidth of 0,4 mm, it will just pile a heap of plastic. I recommend to go down…
Das ist mein Einbau- und Anschluss-Kit für einen Can 125 Abluftfilter. Der entlüftet eine growBox, die genau in einen alten IKEA-Schrank passt. Die Abluft wird nach aussen geführt. Der Filter wird mit einem Plastikflansch geliefert, den…
The model is meant for 2 color printing with a single extruder, you change the filament at a certain height. The base has 4 mm and then the drawing follows with 0,3 mm. Slice it with a layer height of 0,3 mm. and in the slicer insert a…
Add ons for a planter that isolate the print from earthly pigments and dripping water. Wasserfeste Innenhaut + Einsatz für einen Außentopf. This was made to fit into the Roman well head with buccolic scenes which has an inner space of…
I was bored of rectangular desgns for each and all and tried an ellipsoid for this basin (or bowl ?) Dimensions: 160mm x 100mm x 17,44mm It was meant to hold water (tray for a watermill or Sōzu) so it has a solid bottom and thicker walls…
A different shower hose holder, this is intended to support a long shower hose when hanging so the angle won't get to sharp and damage the hose by the force of it's own weight. I printed it in PLA but TPU should work, too. It needs a zip…
Update: I made a new TPU version of this Running the two with identical sensors in parallel shows: PLA wins . More below. The problem with sensor housings is that they always add to the failure margin of the sensor's measurements. This…
A proud Goddess, she shows her breasts. Like Ishtar does or Kali, Parvati. As is the norm for Babylonian Gods she wears a cap. She is flanked by two companions, horses standing on their trails, their bodies nicely drawn but their faces…
Oh, not another Pi-Cam housing! you may say and right you are. So many of them are around there should be one for everyone among them. And still, after collecting and comparing a heap of them none really fit, not even my own. I wanted a…
Der alte Bauvorschlag von Luftdaten.info ist das Airrohr, zwei Knie-Elemente aus 70mm PVC, ineinander geschoben. Nicht besonders schön, aber UV-beständig. Bei einem leider wieder nötigen Austausch des Temperatur-/Luftfeuchte-Sensors habe…
Celebrating the many Ukrainian farmers who utilized their tractors to capture tanks and other armoured vehicles of the invading russian army. This is a remix of a thing published (https://www.thingiverse.com/thing:5270104) by 3DMarioosh…
For some use cases the sharp edges of the aluminium display back of the macbook air would need a cover of a somewhat softer material. These quarter circle corners with a 25mm radius, 2,3mm between the sides and a fillet of 13 fit snuggly…
I designed this part specifically to help a Macbook Air cope with the adverse effects of an all too close encounter with a little ginger tea. (But it would serve on other brands just as well.) It fits on the edge of the aluminium case and…
Nach Gustav Klimt, ex libris Nuda Veritas Dies ist für Druck mit 2 verschiedenen Farben ausgelegt. Schichthöhe 0,2 mm empfohlen. Nach dem ersten slicen einen Filamentwechsel vor der dritten Lage einrichten und so mit Kontrast ausdrucken.…
A printed drawing, 2 dancing skeletons, 123 x 88 mm. This is meant for 2 color printing, you change the filament at a certain height. The base has 0,5 mm and then the drawing follows with 0,4 mm. Slice it with a layer height of 0,2 mm,…
This is a very small case to hold a LDR light dependent resistor in transparent PLA. The LDR goes into the ‘finger’ in the middle, it's wires bend through the slots at the sides both keep it in place and allow storing another resistor…
I have this cheap and rather heavy hair dryer and while this has an eye to hang it on a hook that plastic soon broke under the weight. So a new holder was needed. Since the dryer's balance point is far to the back I added an extension to…
The model is meant for 2 color printing with a single extruder, you change the filament at a certain height. The base has 4 mm and then the drawing follows with 0,3 mm. Slice it with a layer height of 0,3 mm. and in the slicer insert a…
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
I printed the very beautiful https://www.thingiverse.com/thing:32405 and felt she would need some sort of a shrine around her. The first approach was to print some 8-pointed-stars as this is said to be one of her symbols.…
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
A shield for the sensor housing from https://www.printables.com/model/549366-mount-for-ldr-light-dependent-resistor. just like that part would be pressed through an opening of…
The thing is so easy to design, a cylinder of 80mm diameter and 40mm height, hollow, printed in Cura's 'Spiralize Outer Contour'-mode, preferrably in transparent. Makes a small, neat and pretty container for the tiny bits of desktop waste…
The model is meant for 2 color printing with a single extruder, you change the filament at a certain height. The base has 4 mm and then the drawing follows with 0,3 mm. Slice it with a layer height of 0,3 mm. and in the slicer insert a…
This is part of a project to create a fountain for balcony or indoors. It is a housing for a small water pump which somewhat hides the blackness of the pump, dampens the vibrations and serves a plane top for other things (like a fountain)…
=> There is a new and improved version of this at https://www.thingiverse.com/thing:3970973 . The problems with this version are: it needs support to print and it's nasty to clean away. as it is the distance between the sensor and the key…
I installed a handheld bidet sprayer- or BumGun as Naomi Wu calls it ( https://www.youtube.com/watch?v=iRduYc6GWHk ). If you ever travelled to india you'll know those things. Now, unfortunately the water rays that shoot out of it are a…
Part of my overhaul of the luftdaten.info - outdoor sensor. I moved the dust particle sensor Nova SDS011 from it's former 'airRohr' housing (a huge, ugly PVC tube) to a standard 85x85 IP65 . Tight fit but works. Now, sitting on the window…
84,24 x 63,08mm base of 0,5mm, layerheight 0,1 Category: 2D Art
This radiator in my bedroom, pretty useless as I hardly ever turn it on. But what I lack is some place to put a mug on. So I designed a top to convert the radiator into a night table. The radiator has those ribs with precisely 60mm…
I wanted my moon lamp to really be a globe, round on all sides. A tiny addition to the models of urbaier and Bazt: a moonishly rounded cap for what would be the south pole of the moon lamp. 37 layers at 0,16mm layer height, with an oval…
A printed drawing that creates an image of a group of dancers in a Picasso style. This is meant for 2 color printing, you change the filament at a certain height. The base has 0,5 mm and then the drawing follows with 0,4 mm. Slice it with…
A soapdish based on ellipsoids, within 10 x 7 cm frame. The cutouts remind of sperms or in fact, spermatozoids. Just wash your hands … The design allows the sperms to cut the outer contour. Thanks to tecnoloxia_org for inspiring art.
Dimensions: 12 cm between opposing corners, 10 cm side to side. 2 mm height, the edge raises to 4 mm. It should work in flexible material, too. Thanks to M.C.Escher and tecnoloxia_org for inspiring art.
Eine sehr einfache Kontruktion, um eine Stange - in meinem Anwendungsfall eine lange Bambusstange - horizontal zwischen 2 Wänden aufzuhängen. Ein halbes Rohr auf einer rechteckigen Grundplatte mit einem Schraubloch. 3 Ausführungen mit…
A printed drawing that creates an image of a pair in embrace on a field. They look like they'll have sex in a minute and the man is a devil, just look at his feet. Anti-sexual propaganda. The image is taken from monks' illustrations in a…
Vitamin C kann man in 100gr-Dosen kaufen, Drogeriemärkte und Apotheken haben das für kaum mehr als 2€. Über die Jahre haben sich etliche dieser Dosen angesammelt und sind ganz wunderbar praktisch, um Schräubchen, Nadeln, Nägel etc…
The challenging part with this thing is how tiny the details of the printed drawings get when scaled down to fit on the bookmark. No way to get it right with a linewidth of 0,4 mm, it will just pile a heap of plastic. I recommend to go…
The challenging part with this thing is how tiny the details of the printed drawings get when scaled down to fit on the bookmark. No way to get it right with a linewidth of 0,4 mm, it will just pile a heap of plastic. I recommend to go…
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
IRF520 Mosfets that accept 3.3-5V input and let me control DC for LED strings with 12V or 24V. Bought them at https://www.amazon.de/gp/product/B07TWLLTRT/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&psc=1 Those breakout boards do…
You could store anything in it. A rectangle container build from hexagon walls, it just happens to fit the dimensions of the stack of FFP2 masks I recently acquired. For reasons. Print it in a happy color, I chose indian yellow. It's 140…
At least on my printer, with a blTouch on the left of the print head and a line of led fixed under it on the front the best viewing angles for a cam are either from the back or from the right. I build a pillar for the backside to hold a…
Sort of remixing my own tpu-extrusion-cam-holder which in turn was based on slide-in-connectors-for-standard-extrusions . Still trying to get the best use out of the slim usb-cam. It is for TPU and the base has claws which you can push…
Doesn't the Ender 3 come with an electronics enclosure on the front left? It does, I threw mine out when I moved motherboard and raspi to the back, using TT's rear enclosure. I could have taken it again but it has fittings and holes where…
Die Fenster im Hausflur haben keinen Drehgriff, stattdessen steht ein Stift mit quadratischem Durchschnitt in einer runden Öffnung. Dieser Steckschlüssel passt darauf. Kantenlänge ist 8mm und der runde Schaft hat 13,66 mm Durchmesser.…
It's not like I had no filament guide before, it's the third actually. And it has 3 purposes: guiding the filament in a half-circlish path, avoiding sharp bends cleaning/lubricating the filament with a little sponge in a cup fixating the…
I read about it on slashdot A nice article about it gave me the idea to create that shape as a printable tile. Have a look here [wikipedia.org]. It's called an einstein (from German for ‘one stone’) because it does the aperiodic thing…
