10 models
Nozzle & Tools holder for the Prusa XL. The Pusa XL, which does not have Sumo enclosure, requires two M4 T-nuts and two M4 bolts. Insert the T-Nut according to the tool holder hole position and fix it with two bolts. with Sumo enclosure.…
The XCR3D filament connector used when connecting two filaments is easy to connect very short filaments. However, it is not as easy as you think when connecting slightly longer filaments on spool. So I made a stand to make it easier to…
The 26-year-old Fox float X2 rebound knob is difficult to turn. So I made a tool to turn the knob in 3D easily.
Bosch Kiox300 protective skin Used filament : TPU 95A Insert the tall side first and then push in the short side.
At the entrance of the third filament of the Prusa XL, depending on the filament position, the filament may be too bent. Especially with the Sunlu S4 filament dryer, the filament angle becomes more bent. So, I attached a roller in the…
If you use a heat bed controller cover (https://www.printables.com/model/859808-improved-prusa-xl-heat-bed-controller-cover-update) , you can't use the Dan's front nozzle wiper brush…
Sumo enclosure 4-inch duct short version
The length of the brake cable of the Velduro Rogue change as the suspension moves. But I don't think it's good to have a brake cable in and out of the frame. So I made a 3D cable plug that fixes the brake cable that goes into the downtube…
The cable inside the Pole voima frame is secured with tape. I made a clip to secure the cable and bosch display cable inside the frame. There are two files. One is 5mm-5mm-3.5mm. The other is 5mm-4mm-3.5mm. Fix it with 3M super strong VHB…
Install the Xiaomi temperature monitor instead of the temperature monitor provided when purchasing the Sumo enclosure
These are all currently available results.
