Counting matching models…
This is a Gear Bearing with powerful performance. This bearing has perfect tolerance and rotational performance (about 6 seconds of rotation). And unlike other gear bearings, it takes almost half the time to print. It's even easier to…
This is the ideal Hexagonal NASA Chainmail model for FDM. I increased the thickness of the chain from 1.2~1.5 to 1.8(mm), making it easy to print and more than twice as strong while keeping the size of the original. I designed this to…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
You may have discovered Triple gear through Thingiverse or youtube. You may have been reluctant to print it out because of the high difficulty. When I tried to print directly with an FDM printer, I realized that it was very difficult to…
The Perfect Gear Bearing is an upgraded version with a smaller size, yet retaining the same strength and extended rotation capabilities as its predecessor. It features impeccable tolerances, ensuring flawless performance. Moreover, this…
Introducing an addition to the popular Foldable and Stackable Crate - a newly designed lid to improve functionality and versatility! This re-designed lid perfectly fits the original crate while enhancing its practicality, allowing you to…
New version available — check the link below 🔗✨ 🔋 AAA to AA Adapter (M3 Nut, No Glue, Fully Reusable) A simple, ultra-low-cost AAA to AA battery adapter using a standard M3 nut and a short piece of filament. No springs, no metal plates,…
This is a convenient clipboard, designed to be simple, intuitive and easy to use for practical use. The clip section only takes up 7mm of paper so you can save paper. It uses four 8*3mm neodymium magnets (two for mini versions). All parts…
Description: This is the Remix version of the Flat Pocket Whistle! In this updated model, the channels have been reduced from two to one, resulting in a more compact design. Notably, the print time has been halved, now taking only 5-10…
I designed it myself because the mechanism of the Cliky Pen looked interesting. One rubber band is required, and all parts can be printed without support when rotated. It also provides tolerances, so you don't need to resize. +Dec 13,…
This is a stable, long-running top. The center of gravity is perfectly aligned(0.009mm) and technology has been incorporated to reduce aerodynamic drag. !!Emergency Fix!! Conventional rods are not properly toleranced. I provide a modified…
This is a toy that can be easily printed and played with. The sphere is slightly trimmed to lower the overhang angle so support isn't required. The diameter of the sphere is 35mm and the size of the cube is 31mm. The wall thickness is 3…
A typical tolerance tester has a complex structure, so it takes a lot of time and materials to print. But here's a simple one: This pushing tolerance tester provides lower than 1/3 materials and time of a typical tolerance tester. It's…
A beautiful decorative lamp that is simple to print and use. Can be used by putting a candle in the center. When printing, you can use a little support in the center to make the output cleaner. Never insert real candle! It can burn the…
This is a voron cube that can print neatly without additional upgrades when the printer is very well assembled. Printed at @150mm/s 6k accel. Please post your time and records to makes! The temperature is set between 250 and 265 degrees…
The previous model was redesigned because it was difficult to print with FDM. This model was scaled to 50%, but it was easy to print with an FDM printer. +Dec 3, 2020 Found a major problem, all files were changed, existing files were…
Look at this video: PluTop uses only 3.6g of filament(more than 250 a 1kg spool). Generally, less weight = less running time, but PluTop do more than 100s despite its light weight. Because of these design: 1.The center of gravity is…
Older versions were less robust and could only run 40-50 cycles in PLA. However, this version is all hinged and runs over 110000 cycles in PLA. +Nov 24,2020 I made stepv2 to make the motion smoother. +Dec 3, 2020 Added a shaft that can be…
I thought the old version of the magnet was weak. Slip occurs when retracting or moving with high speed. So I redesigned it to use a stronger magnet (8*10mm). I've also attached a .step file so you can make your own design variations.
Shape that has the same width at any location This product provides files that can be printed with MK3. Fixed old gcode files where seam was not aligned. Now you can get smooth surface.
This is the next version of Simple AAA to AA Adapter. Uses a clip structure to secure the battery in a simpler way, and it’s a support-free version. Need assembly guide? Check the original version:
Introduction PluTop Mon is the first 3D printed top that spns more than 10 minutes . It is also the longest running 3D printed top. It can fit in any pocket. Turn it anywhere. Assembly Guide ·Print all the parts. (Spare ring is included)…
mini: A direct successor to the original version. It spins around 2min 30sec (3min max) and almost halving the material. micro: This is a reduced size version. Spins around 1min 40sec (2min max) and uses less material than mini. nano:…
Inserting Chopstick Holder eliminates the need to find and place chopstick holders. It uses very few materials, is small in size, easy to carry, and is hygienic as there are no parts that come in contact with food. Use flexible materials.
These are all currently available results.
![[V2] Simple AAA to AA Adapter (1 Nut, No Screws)](https://media.printables.com/media/prints/be6a3d8b-b32d-4aac-ac9a-6d19f0b0991e/images/12473129_737c2c07-3812-40b2-9765-88ce97c3d266_639391b3-fe6f-4ef7-aff2-f2ae0d33362b/1775084650344.png)
