Counting matching models…
Summary Upgraded Version - this is my standard feeder upgraded with 2 M5 Threads for M5 nuts, to make it a little beat heavier, but still without load - the nuts are made from stainless steel. Slow printing speed, 80% infill. Print…
I bought six boxes (standard bait stations, availiable everywhere) last summer and got also six keys. I lost five of them until winter, so I wanted to copy the last remaining key... I already tested the printed version, it works ;-)…
ideal for 12mm ptouch labels PETG slow speed, hotbed 90/80 the gcode file is for 12 pieces print
It's a simple design but it works - it fits very good. Print with TPU, slow speed, infill 15%. If you want, you can also print the lid downscaled to 99% (all axes) to make it more tight - it's 0,6mm less in diameter = 0,3mm radius / each…
Ein grosser Feeder, 50mm Durchmesser, 70mm hoch (mit Clip 80mm hoch), da passt viel Futter rein. Aus umweltfreundlichen PLA gedruckt, ohne Blei. Am besten für stille Gewässer geeignet. 3D-Druckeinstellungen PLA, hotbed 70, speed ca. 150,…
You can download a printable set of four different feeder baskets for bait mix presentation at the surface. The attached air chamber in the buoy let the basket swim. The buoy swims still on the top, the basket is under the water surface.…
Printable modular fishing lure - hardbait - swimbait - wobbler I made this model in modular design, so you can build your own lure with so many segments you want. There are files for the head, body, back and tail, there are also pearls…
a funnel with a large opening for filling jars and containers with cereals, spices, nuts, cornflakes and much more I use the funnel to fill pellets, flours and feed particles as well as ground bait mix for feeder fishing into suitable…
A little helper…
I made two files with different diameters, one with 25mm for Vileda mop and one with 22mm for a no name mop. PLA 15% infill, no brim, no support.
It's a simple design but it works - it fits very good. Print with TPU, slow speed, infill 15%. If you want, you can also print the lid downscaled to 99% (all axes) to make it more tight - it's about 0,5mm less in diameter = 0,25mm radius…
I made this funnel for better filling of the PVA bags with fishing bait. Made for small bags, but also scalable for XL bags. PLA, infill 2, no support, speed max 150
a simple stand for the Kindle 2024 model WITH CASE it works with the previous model too
Funnel for refilling bottles, 20mm diameter (spout)
A tiny 3D printer model for decoration 7 parts to print and assembly (plus a piece of filament) Printed with PLA. Print all parts with brim. No support required.
My version of the tetris balance game. It's a "light version", without inner walls, the bricks have only outer perimeter. There are two versions of the dice with 8 sides: one with symbols of the bricks (Q4, I4, I3, T4 etc.) and one with…
Replacement hook for reisenthel shopping carrycruiser - spare part. Oval profile 10*23mm, hook diameter 9mm. Printed with 6 bottom/top layers and 6 walls for better stability.
I made this hook for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…
Modified version for log rolls
A box for fishing waste, line, hooks etc. Print the can with PLA or PETG and the lid with TPU. I made three files of the lid: open, open with softened edges and closed. TPU slow speed printing. Both with only 15% infill and 2 wall layers.
Sometimes the fabric around the screws tears, so you can repair the damage a bit The discs are made for screws with 4-5mm diameter. They are 18mm*2,5mm, the space for the screw is 12mm*1mm, the hole in the middle is 5mm. The file is for…
Trout spinner for fishing. You can scale it bigger and use it for perch, bass or pike. Printed with PLA silk, with 6 walls and 100% infill so there is no air inside the printed part. Maybe you will need brim - I used 3DLAC ;-) There is a…
Our disabled budgie has difficulty perching on a standard feeder and eating from it. So I made the feeder 50% lower and a bit wider to improve access. I also added a rounded edge at the top to make perching more comfortable. The other…
Coin with hidden coordinates for solving a mystery cache
The lid is for protecting the Guinness from flies and wasps. The inner diameter is ca. 0,1-0,2mm less than the edge of the glass, so it fits very smooth, the click is hardly noticeable. I wanted this so "light", to protect the thin glass…
Made from PLA, printed with 2 walls and 0% infill.
I made this mould as a gift for a friend who is an injection mold maker (toolmaker). The model contains following parts: mold part 1 mold part 2 two rings ejector hook eye money box with lid The both rings, the ejector and the hook eye…
Holes for mounting on the wall with 4mm diameter (plus chamfer). The clip has 15mm inner diameter. Printed with PLA wall thickness with 4 perimeter for better stability Infill 40% brim
My wife knitted a cardigan and needed big buttons for it. Printed vertical with raft, brim and support. After printing we sanded the buttons with sand paper.
Laser holder for bug-a-salt Version A without screws - only clip. Made for laser diameter 19mm - the clip diameter is 18mm, so it sits very tight. Version B with screws, you will need 3 screws M5x 20mm (or M5x 25mm) with M5 nuts. Made for…
Button 18mm x 3mm For jeans, workwear etc...
PETG, 4 walls for more weight/density No support
Feeder-buoy for surface fishing with bait mix presentation at the surface. The attached air chamber in the buoy let the basket swim. The buoy swims still on the top, the basket is under the water surface. You can use it on three ways:…
A cup holder for standard vending cups, made for a tool cart model FORUM. The clip is made for a handle diameter of 30mm, the gap between the handle and the cart wall is 45mm (the distance between the axis of the handle and the wall is…
I made this tool for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…
I made this tool for a DX-Wire rod. The diameter of the in this case used second segment is 11,6mm so I made the hole with 12mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws…
The gap for the bedrest is 90mm. The storage space is designed for a phone with a standard leather case. The dimensions are: 90x33mm (the opening) and 100mm deep. I made an opening for the charging cable. PLA, brim, skirt 20mm, no…
I designed this holder for a walker with a textile backrest. The space for the phone is 90mm*17mm and was made for a standard phone with silicon backcover, the phone is ca. ⅔ of its length inside the holder. The gap for the fabric is 5mm…
Funnel for loewenstein cpap device water tank prismaAqua A little helper for filling the tank with water without disassembilng the tank. PLA with tree support
A simply and lightweight design for storage of Powerbait cans with 43,6mm diameter on the bottom. I fix my holders on the wall with Tesa Powerstrips, but I also made a file with two 5mm holes for fixing with screws.
I designed this lamp for using standard LED pucks (diameter 68-70mm) with remote control. The puck is fixed with TESA power strip (double sided adhesive pad) I bought waterproof pucks, so the rain is not a problem - if water runs into the…
see images for details
I’ve designed and 3D-printed a stand for drying the CPAP mask and the elbow connector. Now I can place both parts exactly the way I want, so the water drains off in the right direction. I no longer have to put them somewhere on a random…
Two files (reader with or without case) - made for Kindle and Tolino reader. The gap for the bedrest is 90mm. The storage space for the reader without case is: 125x12mm (the opening) and 100mm deep. The storage space for the reader with…
Thin covers for protecting things and items during spraying, four different shapes. You can cover and protect things when you use spray paint, cleaner, oil or just water… (I needed them for watering my mushroom grow boxes, I need to spray…
I made this tool for a NEXT 10 FGN rod. The diameter of the in this case used second segment is 8,4mm so I made the hole with 9mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws…
Made for battery DMW-BMB9 (and generic replacement) for digital camera Lumix. The lid is designed for TPU only. There are two files each for box and lid. One original, the another with possibility to mark the energy status of the battery.…
open ended 30mm wrench (with gap 30,5mm → after printing 30,25) printed with 10 wall loops, PETG, 60% infill
Tray and box for storage and transport of filament samples. I designed this set for printing and storage of filament samples. I think, that flat rectangle samples are good enough for standard colors, but I wanted a better shape for silk…
Filament spool adapter for Ambiano food dryer (dehydrator). Made for using the device to dry filament spools (1kg). The adapter is 300*250mm, with R50 radius at the edges. The wall is 10mm thick, because I wanted it to be stable and not…
Triagle ruler for measuring planking movements. PLA, color change at layer 16 (base 15 layer + digit 5 layer)
Water insert for a copper vase (cemetary). It's a replacement for the original water insert for a hand made cemetary vase made of copper. I was broken because of the frost in the last winter (forgotten to pour out the water). Printed from…
Corona test stand - COVID station
I designed this "hairs" for attaching them to spoons or for making my own UL hookbaits. I was inspired by the chatterbaits with their colourful strings. You can also print them scaled to 200% horizontally. The vertical z axis should stay…
Grave lamp - stand for LED candle, for the cemetery. I made this stand because the standard LED candles are sometimes falling over when it's too windy. The openings in the stand (bottom and top parts) are both 68mm wide, designed for…
Wool stand for knitting and crocheting - for 3,5mm needle The holes are 3,7mm, made for 3,5mm needle. For bigger wool balls you can upscale the model in the slicer, as example: 200% in both horizontal axes will make the base and the…
Ersatzteil für eine gebrochene Auflage des Fahrradständers. Da ich es bruchsicher aus TPU machen wollte, wäre die Konstruktion als ganzes nur mit Supports druckbar, was bei TPU schlecht ist. Deswegen habe ich zwei einzelne Teile…
Blade protector for classic kitchen cleaver. Custom made for my blade with following dimensions: length of the blade: 175mm thickness: about 2 to 2,5mm The hole in the blade (for fixing the straps) has 9,5mm diameter- All parts are…
My wife destroyed the inner part of the vegetable pusher because she used it wrong ;-) There was no replacement part on the KitchenAid website availiable, so we designed this simple part. Printed with PETG, 6 walls for more stability.
TPU Geocaching petling hanger for tree caches. Inner diameter 24,5mm, made for PET preforms with 25 to 25,5mm diameter. Printed with 3 walls and low speed
COFFEE CUP CARRIER - HOLDER FOR VENDING MACHINE CUPS AT WORK There are three different files to choose. This holder is designed for carrying 4 standard cups - the hole diameter is 60mm (the vending cups are 70mm on the top and 45mm on the…
Drei Modelle für jeweils eine, zwei oder drei Kapseln. Klein und platzsparend.
These are all currently available results.
