Counting matching models…
This filament guide was designed to help smoothen the flow of filament from the spool to the extruder of the Ender 3 V2 printer. The filament guide comprises of four parts. After printing the parts, they can be easily assembled by…
In the area that I live, various attachments, such as spray heads, for commonly used drinking water bottle can be found in shops. Hence, I was inspired to make a spout attachment for watering plants. I took the easy way in designing this…
This is a small trash can I made for my study room. I designed this model to be printed without the need for using supports. A sample GCODE files sliced using Cura in 0.24 layer height is attached for easy reference, please. The STL file…
I need to store several toilet rolls in my toilet. Therefore, this project was designed. The dispenser is capable of holding four toilet rolls. Simply put toilet rolls into the dispenser from opening on the top, the rolls will drop to the…
I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…
This s a toothpaste squeezer remake from https://www.printables.com/model/26897-toothpaste-squeezer. A pair of strips was added to the original design to increase the squeezing ability of the model. A sample GOCDE file is attached for…
From time to time, my Apple Watch was knocked off the charging cable by accident causing it not completing charging. It was quite annoying as the watch would be left useless without charge. Hence, an Apple Watch stand is needed. Two…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
By using the original spool holder of the Ender 3 V2, the filament spool keeps swinging back and forth while printing. It is sometimes annoying as it makes some noise. Also, a more secure way for hanging the filament spool is needed to…
There are two versions of this design. One consisted of two parts, the egg white and the egg yolk. Users may print the two parts by using white and orange filaments, respectively. To finish the project, users may then press-fit the two…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
A while ago, I made a toothpaste squeezer by adding a pair of lips to the design from Spidersky1489. It works fine. Well, in terms of squeezing hard. By doing so, I created a problem. Owing to the very small gap to facilitate the squeezer…
From time to time, my Apple Watch was knocked off the charging cable by accident causing it to not completing charging. It was quite annoying as the watch would be left useless without proper charging. Hence, an Apple Watch stand is…
This phone stand can be folded into a flat pack for easy carrying. The stand used a print-in-place design that users may print the stand in one go, without the need for assembling. The flow rate of the users' printers will affect the…
This holder was design to hold rectangular shaped cotton pads. A sample GCODE file sliced in 0.2mm layer is attached for easy reference. User may also make their own GCODE files to suit their needs by slicing the 3MF file attached. The…
The spindle of my adhesive tape dispenser was lost. Hence, this project was made. As the shaft of the spindle caused difficulties in printing, in terms of needing a lot of supports. Hence, the spindle was broken down into two parts, the…
This is a flower pot inspired by the Middle East Style. A matching dish with centering pin to keep it concentric to the flower pot is also provided. Sample GCODE files are attached for easy reference, users may also slice their own GCODE…
This is a 370mm diameter clock. The clock follows the traditional design. As I am using an Ender 3 V2, the build plate is not large enough to print the clockface in one go. Hence, the clockface is divided into five parts. The frame of the…
Game cartridges of Nintendo Switch are small. I misplaced them from time to time. Hence, this project is developed. The objective of this project is to design an easy to use storage device. Among all form factors, I choose the form of a…
This is a paperclip holder designed with reference to the image of Mt. Fuji.
It is embrassing to find that the toilet roll on the holder was run out when using the toilet. Hence, I made this spare toilet roll holder to serve the need for storing one more roll. In order to save space, the holder was designed to be…
There is a hazard for viruses entering the house through drains pipes. Hence, U-shaped drain pipes are recommended to be filled with water from time to time to block possible air flow. As such, this design was made. There is a little…
The loops from my belts often fell out. Thus, this design was made. There are three files attached, a short one, a medium one and a long one. As the design was only 0.6mm think, I printed it in 0.2mm layer height that only three layers…
These are all currently available results.
