Counting matching models…
This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…
Thingiverse import! I don't own any of this. Designed by Nate Waddoups https://www.thingiverse.com/thing:5426967 "The top of the King Song S22 chassis ends with a sharp 90 degree angle, which gets painful after a while. They provide pads…
The Begode Master kickstand is a little unstable with the stock pads. This will give you a larger surface area for more stability and a place to lift up the wheel.
I combined the v1 and v2 lid seals. I love the new pull tab but also love the desiccant bin from the original. Its a tight fit like before but easier to get a grip on. To clarify, you take the bin/basket from V1 and it twist-locks into…
A remixed mount to hold your Kuando busylight better than the stock 3M sticky.
This is a spacer I made for my adaption of attaching the Luna Float seat to the Veteran Sherman
Used models proved by https://www.thingiverse.com/thing:3681416
Offset snap part A with a hook to secure it to the corkboard portion of my cubicle. Hooks on top and bottom to hold it securely.
Wrench for the DNM DV22AR rear shock. This is a thingiverse import. I don't own anything. All credit goes to BlindMouse_RJ on thingverse.
This cover protects dirt from entering the suspension channel. I do not own this. Found it online.
I made this file by remixing https://www.thingiverse.com/thing:5358844 with another part not on thingiverse. So far a bottom layer 2 walls thick seems to be good. 10% gyroid infill seems like a good starting point. You can go less for a…
This is a little kickstand I made for the KS 18XL electric unicycle. The overall length is 5.5 inches (file was made in inches so you might have to scale it). Requires qty (2) 3x23mm screws available at any RC store. Just ask them to look…
Made yet another adaptor for Body Glove SUP pump and a Ryobi blower because none of the ones I found online fit.
Made an 1/8" imperial equivalent of M10 because I had those lying around.
This is a 2x4 gridfinity tray that holds the HobbyTools brand sprue/side cutters from Hobby Lobby.
A simple hook/hangar for the back splash of a cubicle. Using the 9mm large T nut, I simply extruded a hook that was dimension to the thickness of the cube wall.
A simple nail polish tray with 6 compartments (roughly 1" compartments)
This bracket is intended to be used with the Clarkpads faring for the Master and the headlight located here: https://www.amazon.com/gp/aw/d/B07FDVJTLX?psc=1&ref=ppx_pop_mob_b_asin_title Must be printed in TPU as the bracket will need to…
Protect the headlight of your Veteran Sherman. This slides around the stock Sherman headlight to provide protection in the event of an impact. It also allows further use of accent color. Designed to be printed in TPU or other flexible…
I made this adaptor to be able to mount my night ride light to my Sherman. You'll need two 6x60mm bolts with nuts and washers. I recommend printing this in TPU so it can squeeze the light to keep it from falling down. I also used the…
A replacement for the cheap stock fender. I printed it in TPU vertically which no supports.
Fills the space inside the suspension channel to help keep it free of dirt. Print in TPU. I don't own the file. Found it online.
I printed this in TPU. It works really well as a lift point. Print it with the main handle down to avoid the need for supports.
The apple slicers never cut all the way through and needs a final push. I search on printables but couldn't find any. Luckily thingiverse had one but I didn't like the sharp points it left so I remixed it and posted it here. It works with…
This is a little mount to securely hold my mirror to my helmet but still allows it to be removable. There is a flat version and a curved version. I had to apply some scotch tape to the mirror to increase the interference. I also used a…
Spool dimensions used to create this adapter: 75mm hole diameter 57.8mm spool width
Just a simple battery holder. I bought two 5-pack batteries and used one so that leaves 9 batteries I need to hold. These hold the A23/23A 12V batteries you find in some house hold remotes. I added a top with no text in case you want to…
These clips hold the paddle firmly to the board.
Remix of a screw driver holder. 3 prints are needed for the set.
After my Sherman fell over, the plastic brackets on the back of the tail light broke. I didn't want to send the $40 for the replacement so I designed this little bracket that gets superglued to the back of the light. I used pliers and a…
Deburring tool holder w/storage for extra "blades". Compatible with Multibuild that prints without support. This is for the generic Amazon deburring tool that many companies print their name on.
A 5mm spacer for an 8mm pedal rod
This is a new handle for my can opener because the original one broke. Category: Kitchen & Dining
Spool dimensions used to create this adapter: 57mm hole diameter 70.9mm spool width
Can't hear the beeps on your MSX/MSP/MSv3? Worry no more with the "FlyBeeper" mod created and designed by me! Just print it, and replace the old one. Note: you will forgo the USB port but I've never used it in the 2 years I've been riding…
I don't expect anyone to really need this but for those who bought Roger's Master Linkage, you'll need these spacers.
I added some fuzzy skin to the O.D. to give it some texture. It functions very well.
These are all currently available results.
