Counting matching models…
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version. it takes D3mm steelrods, wich are bended in shape. 15mm then 90° angle, then…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Easy to print Glasses, no support is needed. For the hinge use a bit of filament, if you have the 1.85mm one. Else print the pin and use that. The glare should fit snug in the cutout of the glasses. for best result, press the glare in…
small paint/epoxy mixer with Hex-rod 8mm, total diameter of the rotor is 35mm and 20mm tall. Rod is 100mm long but easly strechable if needed longer.
Deutsch: Ein faltbarer Tellerhalter zum aufstellen oder trocknenlassen von Tellern oder anderem Geschirr. Besteht aus der Wanne(Body) und 2x den Seitenteilen(Side), diese weden separat gedruckt und dann in die Wanne eingeklickt. Version 2…
I was printing the free version of Eclipson's model A and i did not trust the CA-glue to hold the wing together between the Centerwingpart and the wingparts on the left/right side. So i designed 2 simple parts that fit in the open area in…
as I had no matching radial fan at home, I have a normal fan rebuilt.
Deutsch: Ein kleiner Helfer zum entgraten von Holz und Kunststoff. Dieser Kantenhobel macht je nach Variante einen 1mm x 45° oder einen 2mm x 45° Kantenbruch. Die beiden Varianten sind jeweils mit den entsprechenden Nummern versehen.…
the part “top” is sewed on your baseball cap of joice. the hexagonal Bolt part is printed laying on the side with support, same as the propeller. to assemble the bolt gets jammed in the hole of the top part. maby you need to file the eges…
Deutsch: Halter für Tassen, Gläser und Flaschen auf der Sofearmlehne. innenmass vom Halter 180mm, meine Armlehne ist ca. 200mm breit so klemmt der Halter gut und wackelt nicht. in der mitte ist ein D100m Kreis 3mm tief für IKEA…
Deutsch: DVD / Blueray Hüllen halter unterteilt, so dass bis zu 10 Hüllen platz haben. English: DVD / Blu Ray case holders so that up to 10 cases have space. Print instructions Deutsch: Ich habe das Teil mit 0.2mm Layern gedruckt, dazu…
a landinggear for my DJI Flame Wheel F450.
Deutsch: ein Teil welches die Joysticks der Mavic Fernbedienung während dem Transport in der Tasche schützt und dazu noch platz für einen Ersatzakku bieted. English: A part which protects the joysticks of the Mavic remote control while…
I made a adapter for a deposit PET bottle, that easily hold 10bar and is easy to replace the bottle. I made the bottle plug out of aluminum because the G1/8 thread is stronger in alu than in PLA. You need: 2x O-Ring 14x3mm 2x M3 nut…
Work in Progress! but prototype is printed and works! Mecanum car with independent suspended wheels and a motor for every wheel. 4x Planetary gearboxes to reduce the motor RPM take the project files with a grain of salt! I recomend to…
Pan cameramount that also holds the vista. It fits in the reces of the FPV canopy of the AR wing Pro. also secure the canopy in some way, else you will lose it! its operatred with a normal 9g servo. the Clamp part goes on the inside of…
to save space i wnatet to hang my Heewing F-01 to the wall. But i could not find a wallmount here, so i designed one myself. Easy to mount with 2 screws and holds the wing securely. Print Settings Printer Brand: Prusa Printer: i3 MK2S…
simple and eas to print foamcutter with adjustable cutting depth from 0-7mm with 1mm increments marked. it uses a srandard cuttingblade about 9mm wide and 0.5mm thick and 30° "break off's" Fusion 360 file is also included, feel free to…
mount for the GPS Module from the Naza-M. I don't kow if it fits with the module from the Naza-M V2.
A langinggear for the AtomRC killer whale. It fits in the designated spot in the fuselage. You need M3 bolts and nuts to srew it in the fuselage. All the holes for the carbon rods are designed exactly 3mm so for easy assembly i recomend…
TPU printed holder for the RunCam Split 4k. It hlds the Camera and the Board. other Split style cam's could also work. I designed it for the Split 4k. the board is just held in the TPU no Screws needed. the Cam gets mounted normal with…
Deutsch: Einfacher Tiny Whoov, es sind keine stützstrukturen nötig. Alles kann einfach zusammengesteckt werden, ohne kleben oder schrauben. English: Simple Tiny Whoov, no supports are needed. Everything can be simply put together, without…
Deutsch: ein dreiteiliger Autoabfall, welcher im Getränkehalter platz findet. wenn ein kleiner Plasticksack verwendet wird dient der "Sicherungsring" zum festhalten des Sacks. wird Kein Plastiksack verendet ist der Ring nicht nötig. Kann…
I got inspired vom the model from rene100m( https://www.thingiverse.com/thing:5160170 ) but i was not happy because the band from the mask came lose. so I designet one wich holds on to the band. to relieve the ears while…
an easy Batterypack holder for 2S 18650. top klicks in place. fits i GoPro mount's
an easy Batterypack holder for 2S 18650. top klicks in place. fits i GoPro mount's
it klicks the recording button on the GoPro. The "Trigger" is mounted the gimbal with the GoPro and is controled with the reciver.
Add some Stick-on floor protectors on the side that faces the wall. Printed with 4 perimeters, 20% infill and 0.3mm layerhight.
These are all currently available results.
