Counting matching models…
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and US pennies or 5/16 washers to adjust the cut width. Parts 2, 608 bearings (8x22x7mm) (Grind at least one side flat to use as a shearing surface. I used an angle grinder…
The only difference from the original is that the clamp and bolt are 30mm shorter to make it fit better on desks with a thinner edge. This also helps make the mount Slightly stiffer. Nothing else has been changed all the bolts and caps…
I made this print because I couldn't find a sand rammer that perfectly matched my needs. This one is designed to fit on a Prusa printer, and be easily castable in sand. All sides have a slight slope, even the bottom, to make casting as…
This print works very well for sand casting just be careful around the bottom of the feet when removing the mold, they are the only vertical surface on the part. I recommend sanding and painting the parts before using them, the smoother…
This extension is designed to keep the twist axis, and be completely removable. No cutting or modifying the original parts. Edit: To adjust the drag and so the twist axis centers properly a small amount of grease can be used on the shaft,…
This is a replacement part for G430 Logitech headphones. The side piece that always breaks, has been rebuilt stronger than before. This is for the right speaker side, if you need the left side just mirror them in your slicer program.…
These drawers are designed to fit the standard Hatchbox filament spools. Four drawers per spool, and clips for stacking the spools on top of each other. The pins should fit the four holes around the edge of the spool. No extra parts…
This can all be printed without any supports. It's designed to hold 6 18650 cells in a 12 volt configuration while allowing the use of a BMS and battery removal. I've been charging and discharging mine at ~2 amps without any problems. To…
This is my attempt at recreating the Axe Head found on the Otzi mummy. They aren't exact copies, but similar in size and weight. The blade in the pictures is Otzi 2, the part of the mold for the other blade cooled too fast due to my…
This is a design for drawers that fit in the MatterHackers build series spools. I designed them to save as much plastic as possible. It comes with 2 hole guides. One is placed on top of the spool to align the top holes. The other is lined…
This is a base plate for the T.16000 Accessories model released by Thrustmaster. The mount is great however the feet on the t.16000m joystick prevent it from sitting flat on the mount, this base plate fixes that issue. It also makes the…
These fan covers are the same style as my standard hexagonal fan covers. These fit over the NA15 fan, includes 3 options, a low profile, a low profile with tabs, and a 5mm tall version. The screw hole spacing is 105mm.
This Spool is designed to hold homemade PET Filament, because my PET filament used to unspool itself and get tangled. The spool is Small but it will hold at least two 2 liter bottles worth of filament. (It can probably hold more but I've…
A print in place air layering root pod that requires no supports and snaps closed. I recommend printing at a .2 layer height using Dry PETG. The hinge might be a little stiff right off the print bed but will loosen with a little flexing.…
This is the two prong key for Dial shower soap and shampoo dispensers.
This T slot nut is designed to fit standard 3m screws/nuts and hold firm in 3030 T slot aluminum extrusion. The small holes on the top are for fine tipped tweezers or paper clips to twist the rail nut into place. The nut holder has a slot…
This is my handheld retro gaming system. It runs off of a raspberry pi 4 with an msata through usb, and a teensy 3.2. The screen is 7 inches. The OS is currently Ubuntu. This was mostly a learning project for me and isn't designed with…
This is a base for the Rule-A-Matic Model 35A float switch. I have made some minor changes to the outside dimensions for better stiffness and printability. The float switch will also sit about 1mm higher in the base. The plastic and print…
A case for the USB valve project using a Pico and the 128x64 screen. Everything is a press/snap fit. Printed with a .6 nozzle at .2 layer height in PLA
A simple pencil holder that fits in the center of a hatchbox spool. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .3mm Infill: doesn't matter Filament: matterhackers PLA Black Notes: no supports…
A shaft seal gasket for the Powermate Powerwinch model 501 The seal has an ID of ~90mm(~3.5"), OD of ~114mm(~4.5") I printed this because I couldn't find the part online and the closest examples cost over $20 with no assurances that they…
This is a built in battery holder for the 2025 coin cells used in gameboy cartridges. These cells are what keep the memory working for saved games. The idea is that when one battery starts dying you can easily add a new one before…
This is just the front half of a Gameboy color cartridge. This will be updated when the second half is finished. This is the start of my dual battery GB cartridge that allows Two 2025 to be used so that batteries can be swapped safely…
This fruit picker is designed to thread onto most wooden handles found in North America with an ACME thread, standard on most mops, brooms, paint rollers, etc. A bag is tied to the bottom to catch the fruit. The picker was designed around…
These are all currently available results.
