Counting matching models…
Made this as a quick solution for a camera rig cheese plate. There are two versions, 1) that uses Heat inserts and 2) that uses standard ¼ & ¾ nuts. Print Instructions -Minimal 5 walls for strength around heat inserts/nuts -PLA+ or better…
Retro fitted the PPMCXish brace to fit the Sauerkraut V2 Folding Brace folding mechanism. For build/print instructions head to Sauerkraut V2 Folding
Fully printable 90 degree D-tap connector. Parts needed .. (1) 2mm by 10mm screw and nut. (2) 3mm copper female pins. I attached the Fusion360 model for the pin insert because some pins may be slightly different sized (depending on where…
Simple mount for 2 3/16 brake lines Print Directions Orientate on its side 10 walls No supports ASA/ABS/PETG recommended
Replica Mosque for home decor Best to us paint on supports For best results use manual support painting feature in your slicer and trace the inner circle of the top dome this way you don’t use a ton of support material. Note: If your…
PETG or ABS recommend since this will be outside most the time. I used a brim for the bed adhesion 10 walls to make the whole print walls. Left 15% infill
Universal Phone Stabilizing Camera Rig (3) 1/4-20 UNC mounting points for camera accessories Fits most phones with a case including Iphone 15+ Print 2 caps. I used TPU with 15% infill so you can push the caps vs twisting them. ***Note 5…
Simple stackable 3.5" HDD storage caddy with 80mm cooling fan mount. Made this to expand my Plex server's storage. I used regular PLA and haven't had any issues. Print Instructions Print with the hexagon pattern facing down on the build…
Not sure how long this will last but it does work! I have over 2,000 miles on it as of now. I have this installed on a LS1 BBK intake manifold and a BBK 85mm TB TPU 95A High temp Print Settings: 10 bottom layer 10 top layers 4 + walls…
*** UPDATE *** I angled the frame slightly for a better viewing angle Fits Knomi v2 I made two versions, one for multi-color and one without. For the power I used a 5V USB-C female adapter from amazon I also made a spot for a push button…
Made a few different sizes, 50mm 100mm 150mm 200mm Print laying flat. you'll see how the model it "notched". This is for strength. You'll want to add a few strips of hockey tape to that area to build it back up before regripping. slides…
Small storage organizer modeled from the video game Rust. Taco clan!
Fits Raspberry Pi 3&4 Parts Required x4- 3m heat inserts x1- 40mm 5v fan
I used TPU, def not required but more useful than other filaments 3 or more walls 10% or more infill---GYROID 2 sizes-- 8oz-- 53.5mm 12oz-- 57.5mm
GV18 Candy machine wheel inserts for different size candies. Attached Fusion360 file for anyone who want to make their own sizes. ░░░░░░░░░░░░░░░░░░░░░░█████████ ░░███████░░░░░░░░░░███▒▒▒▒▒▒▒▒███ ░░█▒▒▒▒▒▒█░░░░░░░███▒▒▒▒▒▒▒▒▒▒▒▒▒███…
Fun TPU watch band for Swatch Watches. I made two bands, one solid and one with hex cut outs. I used TPU 95A 4+ walls
A fun tribute to Taco clans base design modeled from the video game Rust.
Taco Taco Pretty simple build The logo is resin printed but you can probably use any sort of translucent filament. I used a 8 ring led from amazon-- here's the link LED
I couldn't find a RTR one of these so I decided to make one myself. I've included one whole model and one that's broken into 2 parts for easy printing. "Ready To Rock"
These are all currently available results.
