Counting matching models…
You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt. The Grid is 14x10 and up to 8 height on the smaller drawer and…
I didn't like the designs that are avaliable. So I made my own :) The gridsize is 3x2 and 3 in height. It is stackable and Printable without an MMU. The Design was heavily inspired by the Nautilus -NOZZLE BUNKER- I used for a year now. I…
It fits a standart 2 Meter Folding Ruler
I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…
80x80 Junction box 2020 bracket
its just a remix to fit common wheel locks
just a Remix to fit the Rigol PVP3150 Probe
My bottom panel started sagging because of the het plate heat heating the acrylic, so i made this quick fix. just screw it below the panel on the 2020 extrusion on the side facing the electronics.
You may use 15 M4x10-20 button head Screws. Every M4 with a maximum length of 20mm and 3mm head will fit. I used cheap M4x12 TORX screws from the department store. It got a front lip which is 10mm. The purpose is to make it fit perfectly.…
A small 2x1x3 cup for a 3D Printed torque wrench
You need to print the Case L+R 4 times and the Top once. you can use the gluing rig or glue the edges with a clamp. The gluing rig need m3 threaded inserts and M3 bolts. Then stick a LED light strip up to 12mm wide on the inside. At the…
A half sized remix 2x1x3 for 7x5cm Protoboard
This is a fast made Lack enclosure feet for a higher enclosure. You need at least 4 per level. I used 8 to secure the legs even more. You need 24 (3,5x12) wood screws per level.
These are all currently available results.
