Counting matching models…
Info Simple, fast and low cost bridge test. Only ~2g. Printed really well on my ender 3. Tested with PLA. Update: I have added more distances with level name. Update 2: I tested all levels on my Ender 3 with the Hydra Fan Duct and as you…
A simple Red Bull cover to keep your drink fresh. I added two versions... with text or clear. I used TPU, I haven't tested any other material, please let me know your experience :) Print Settings Rafts: No Supports: No Resolution: 0,2…
A simple Beyblade arena. Multiple models are available (for large and smaller beds). I recommend to lightly sand the surface, but even after printing it is usable.
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
Info Working mini bows wih arrowhead. Both are design from pictures of Hungary and Turkish bows. Bowstring is from ordinary rubber band. Hungary bow - simple design Hungary bow - real look Turkish bow Arrowhead is design for 3mm skewers.…
Info First time I printed it with small lateral tips, but this damaged the main tip (probably bad slicer settings) - pic. 3, so I removed it, because lateral tips are not necessary. no support needed (except " target_pin_v2_type_C " and…
Info Hi, I made a simple magnetic chessboard and remixed the 1950 Dubrovnik chess set by.: https://cults3d.com/en/3d-model/game/chess-set-dubrovnik-1950 Works really nicely with 2x3mm magnets (superglued). I recommend to print chess set…
I was annoyed as I kept hitting the ground with the bottom of the drone. I made these small, light and efficient legs which work with original screws. My quad now weighs 37g with the battery and with the stock battery (250mah) I have the…
Info Simple clip with 16mm diameter (I also made clip with hole for ruber - as fuse). I also made split pin with 4 x 20 mm. Note: Reducing the clip size in the slicer should be fine to use on a smaller diameter. (not tested) Print…
Update New design - print with supports :-) Simple stand for Mobula 6 with slots for batteries and USB charger from original package. Battery hole dimension (Length x Width x Depth): 12,5 x 6,5 x 8 mm. Note: I miscalculated when designing…
Mount for Walksnail Avatar HD Micro kit antennas. Two versions. Print with TPU. Other FPV stuff Print Settings Rafts: No Supports: Yes Resolution: 0,2 Infill: 100
Simple camera holder for Foxeer Aura 7" frame. Designed for Foxeer Aura V2 7" frame. I printed it with TPU 95A. Other FPV stuff Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 99
Simple cover for USB 1S charger. There are also holes for two LEDs and a switch. It also fit in stand, which you can download here: https://www.printables.com/cs/model/238194-mobula-6-stand Other FPV stuff: Alien 5" GoPro mount Alien 5"…
update 30/09/2022 - updated design of version 1, added version 2 Designed for Alien 5" ReadyToSky frame. I printed it with TPU 95A. Other FPV stuff: Alien 5" GoPro mount Alien 5" action cam mount Alien 5" GPS mount Alien 5" Legs Mobula 6…
Terminator head as "pilot" with two red leds controlled by RC transmitter. Scaled for RC plane: Sky Surfer x8 How it works: https://youtu.be/9ZXzXPdqMNs Print Settings Rafts: No Supports: Yes Resolution: 0,2 Infill: it doesn't matter…
Simple GPS mount for Foxeer Aura 7" frame for HGLRC M80 PRO. Designed for Foxeer Aura V2 7" frame. I printed it with TPU 95A. Other FPV stuff Print Settings Rafts: No Supports: Yes Resolution: 0,2 Infill: 99
I like the minimalist design, but my Xiaomi redmi note 5 with a silicone case in portrait mode is too heavy (it overturns). So I modified the model and now it has better stability even for heavier smartphones.
Vytvořil jsem kopii rozbité nohy sedačky + kopii podpůrné nohy, která se ztratila. Dvě verze: Podpůrná (kulatá) Je lehce upravená pro vyšší pevnost Obsahuje otvor pro M8 šroub (délka podle potřeby) Horní otvor je podle originálu pro…
Info Show-case designed specialy for 3D metal puzzle car from aliexpress. You can use different stls.. with text and holes or solid bodies. From my experience I little bit redesign support... bigger holes for transparent foil (not…
Adapter for Walksnail Avatar HD Micro kit 25,5x25,5mm M2 --> 30.5x30.5mm M3 Print with TPU. Other FPV stuff Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 100
CZ: Kvůli chybějícím sponám jsem vytvořil kopii, aby šel kufr na nářadí opět zavírat (jelikož žádné spony už neměl). Doporučuji tisknout z PETG, jelikož je pružné a vydrží ohyb při otevírání. EN: Due to the missing clasps, I created a…
The STL file copies the original size of the puzzle. To find the optimal size, the top cover can be adjusted by +-0.2% (X and Y axis) in the slicer. For me, -0.2 (99.80%) works best.
This remix features a redesigned fastening mechanism to ensure a secure fit for different straps.
Simple basewith cutout for perfect alignment.. The size is adapted to the size of the original model.
The STL file copies the original size of the puzzle. To find the optimal size, the top cover can be adjusted by +-0.2% (X and Y axis) in the slicer. For me, -0.2 (99.80%) works best.
Added top cover. To find the optimal size, the top cover can be adjusted by +-0.2% (X and Y axis) in the slicer.
To find the optimal size, the top cover can be adjusted by +-0.2% (X and Y axis) in the slicer.
To find the optimal size, the top cover can be adjusted by +-0.2% (X and Y axis) in the slicer.
To find the optimal size, the top cover can be adjusted by +-0.2% (X and Y axis) in the slicer.
These are all currently available results.
