All models

GFB BOV Aztec death whistle

AAAAAAAHHHHHHH Category: Automotive

fancy dickbutt 18+

cnc flexible sanding drum head

sands uneven edges on wood and keeps natural formations, just smooths them out good for sanding large quantities, just need to make a tool path this uses belt sander belts cut up, it needs to be fabric backed fold about 5mm of the belt…

HE3d/huxley extruder Herringbone gears

my printer came with badly printed gears, i looked for some better ones but they didnt work, so i customized some to work i included the .scad file so you can edit them in openscad i added a file with the drop shaped holes in the large…

BFB Buggy remote control

a while ago i saw this video https://www.youtube.com/watch?v=Q2oevP2eKNk and wanted to get the files, i eventually found and downloaded them i found them on my computer hard drive after forgetting about it and decided to make it easier…

HKS SSQV Insert in a GFB trumpet

i havent tested it out yet, its currently the gold fin Print with lower layer height for the thread, use a high temp filament, i'll probably do PETGCF Category: Automotive

GFB BOV whistle

Probably a bad idea but YOLO Category: Automotive

ZOHD Talon GT Rebel nose cone integrated micro camera mount and naca duct

wanted a new aerodynamic nose with an integrated camera mount Untested +5 -15 degrees camera tilt Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Rafts: No Supports: Yes Resolution: 0.16 Infill: 100 Filament: something strong…

Hsp batttery clip

i needed a custom battery holder for my rc car because the original one was too small fits a 4000mah 3s theres an elongated hole to allow for some variations in mounting hole length use aluminium body posts to replace the stock ones this…

the it crowd moss

this is the pixelated moss from the opening credits Category: Sculptures

ingress resistance badge

you will need to make it with support, but the support side will be toward your shirt and wont be seen, so if there are marks thats fine this is my first version, i might change it later i uploaded a flat version so you can stick it…

Universal RC plane canopy

my rc plane (superfly incase you were wondering) had a foam canopy which was really fragile so i designed this. i designed it so it can be used on many different planes its uses zip ties to go through the foam into the printed rim on the…

the mighty boosh keychain

i uploaded one with the pupils, they are not attached yet, you may want to use some wire to attatch them Category: Keychains

Lomography Belair 6x12 frame

Replacement Lomography Belair 6x12 frame The step file is uploaded to make it easier to modify for other sizes Category: Camera

Lomography Instant lens splitter

Used for multi exposures, fits the lomo'instant, haven't tried it with others like the instant automat Use TPU so it is a tight friction fit and wont scratch the camera Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100…

Subaru Blow Off Valve Flange Gasket

Based off the Turbosmart Kompact dimentions Print in TPU From the Turbosmart site: SUITABLE FOR Subaru Forester XT (EJ25) 2008-2012 Subaru Liberty/Legacy GT 2003-2008 Subaru WRX 2008 Subaru WRX 2009-2014 Nissan Juke and Pulsar 1.6L Turbo…

pelican case bluetooth speaker front panel

Front panel for a diy bluetooth speaker using this amplifier "TPA3116 Bluetooth 5.0 Digital Power 50W Audio Amplifier Board Accessories" Amp:…

drone backpack strap mount

inspired by this http://www.iflight-rc.com/2pc-bundle-mount-plug-in-accessories-with-bettery-strap-for-fpv-quadcopter-racer-backpack.html uses 20mm battery straps, scale it up and modify if you want Category: Hobby

micro fpv camera to fullsize adapter

fits a 13x13mm micro camera (mine is from a kingkong 90gt) Print Settings Rafts: No Supports: No Resolution: 0.2 Notes: 0.3mm bottom layer Category: Hobby

Zohd Talon GT Rebel front gopro plug

Covers up the front gopro hole if you dont run a gopro Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Supports: Yes Resolution: 0.2 Infill: 100 Filament: ESUN TPU Category: R/C Vehicles

1998 Mistubishi FTO Glovebox Hinge

print sideways so the layers are solid on the hinge sizing may need to be tweaked Category: Automotive

connex antenna mount

needed a mount for the antennas uses an m3 bolt, you may need to drill out the hole a bit Print Settings Supports: Yes Resolution: 0.2 Notes: i used abs Category: Hobby

he3d prusa i3 hotend mount remixed for clone e3d hotend

my hotend has a largish push connector so i widened the hole and added some more material to the sides to strengthen it Print Settings Printer: he3d prusa i3 clone Rafts: No Supports: No Resolution: 0.3 Infill: 100% Category: 3D Printer…

anti backlash adjustable prusa i3 x motor mount

modified version of my other mount but with a longer threaded rod nut hole for an anti backlash setup using two nuts and a spring i havent tested it, the hole might not be deep enough i modified it and now the hole is an inch deep…

button for he3d smart lcd case

on my printer it had a case for the lcd but had no cover for the reset button so i couldnt access it, the diameter is around 6.3mm and the lip is around 7-8mm Category: 3D Printer Accessories

fatshark receiver module dock

fits a 10 pin socket and a small perf board to give it strength (about 3 holes wide, might need to sand it to fit fits the boost converter linked, has a cutout for wires…

PS1 namco gun laser mount

i had a laser housing and an empty ps1 namco gun shell so i made a laser gun Instructions it uses 11mm laser housings, just the silver one people usually use i included the sketchup file if you want to edit it you can turn a namco gun…

transtec frog universal camera mount

i needed amount, found the action cam mount but the mounting holes were wrong on the transtec frog. i used the holes from the top plate and moved the mount into the middle of the frame to help with weight distribution Print Settings…

kingkong 90gt/95gt/110gt runcam split mini mount

i needed a mount for my 90gt to mount a runcam split mini youll need longer standoffs to raise the camera out of the propellors if you mount it in front the file with the bar is to glue a camera mount to with the "20x20" file, the bar…

oppo F1s case RWBY Pyrrha logo

heres a phone case for an oppo f1s with Pyrrhas logo from rwby its made for dual colour printing and works with a single nozzle if you print the logo first then the case around it Print Settings Printer: HE3D I3 Prusa i3 clone Rafts: No…

HE3D prusa i3 dual hotend mount

eventually i will make my printer dual colour i havent designed the fan mount/clip part yet, i will soon Category: 3D Printer Parts

bullets for confetti six shooter

i had a confetti six shooter and it was boring so i made these they work really well there are two types, a flat bullet and a pointy one, i made the flat one first to see how it would shoot they are slightly smaller than the barrel so…

prusa vernier caliper holder

i kept misplacing my callipers so i made this it fits on the z axis top mounts Category: 3D Printer Accessories

My Customized Spool Holder with Gear Bearing for esun 500g filament

Customized version of http://www.thingiverse.com/thing:72069 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=72069 i made it so that you put a bearing on both sides of the spool Instructions Using the…