Counting matching models…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. This mod for improved part cooling was designed around this mod that…
I saw this thing on aliexpress and I found it interesting. I found it kinda expensive, so I decided to design my own. I like to believe I improved it. Keep in mind that your thread gauge might have a slightly different shape. I included…
My friend asked for my help with fixing his lawn mower. The button for locking the lawn mower height broke and he asked me if I know a way to glue it back whilst making it at least as strong as it was from the factory. The alternative he…
I bought that reusable cup from aliexpress, but the coffee needs to be evenly pressed. The spoon that comes with it is not good enough for pressing the coffe all around. I know the handle is not so ergonomically into due to those edges, I…
I designed this thing so I can mount the magnetic carholder lower down the central console. This keeps it away from my view but still easily accessible. My USB charging ports are also in the ash tray area, so the cable does not have to…
I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e
just a cap that goes on the motor pulley/gear. The pulleys on mine were 13mm. I made the inner hole of model 13.05mm with 0.8mm walls.On mine it was tight enough to fit over the pulley. Taking it over may be difficult tho'. I was able to…
This is my attempt on using a silent 4020mm axial fan for cooling the heatsync. Haven't tested it yet during printing, but after my first tests on the bench, it feels like the airflow is about the same as the tiny radial noisy fan that…
use 100% infill and add the pause macro at the right layer. I used a 0.25mm nozzle with 0.1mm layer height this is the charger I got from aliexpress for my passat b8, but they say they have models for Passat B6/ B7/ B8/ ARTEON/ CC/ R36.…
You print 6 pieces of this, stick them onto the back of the mirror (80cm diameter Ikea LINDBYN Mirror) using some high quality double sided tape, then glue some LED stripe all around it. The pieces are designed for a 300x300 bed.
This holder is used for holding the flat cable of a Sprite extruder (Ender3 S1 extruder) on a CR10 V3 extruder metalic plate. If you are using a different 3D printer with a different extruder, then open up the f3d file in fuson360 and…
I designed this thing to place my laptop behind the monitor whilst still using the monitor arms.If the monitor does not have the vesa mount flush with the monitor surface you can use the spacer. The position of the laptop monitor is not…
I designed this so I can hook my Wifi Accesspoint outside on a wall. I drilled two holes for the wall plate and used double-sided tape for the device side. I should probably make a trapezoidal one or make a locking clip. However, this one…
just some tiny end caps you can clip onto the 2020 at the end of the linear rail. The sole purpose is esthetic. It matches the size of the linear rails and it should not get into the way of …anything? I am thinking about puttind a set of…
My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts. The V1 had to…
The thing sits above the registration number, right in the middle. I bought this for a friend, hoping I can replace the registration number bulb, but it did not fit, so I had to design this thing.…
You can use these if you need to store the motherboard horizontally. You can use the same screws you would use if you wanted to screw it on a computer case
It should fit on a 37mm diameter pipe and the ball diameter should fit any car holder on the market. I would advise inserting a 4mm screw inside for extra strength. Mine broke in between the layers even with the screw, but it remained in…
Just a remote holder for BOSCH Climate i Series you so you can hide it under your desk. Note: The one in the picture is V1. The V2 is longer, thinner, and narrower, so the remote does not sag.
I am not sure what are your expectations when it comes to baby proofing, so, please, don't store dangerous stuff behind this “lock” . Make sure there is someone in the same room in case something goes wrong. I didn't like the idea of…
I made these extended legs for my desktop (Corsair 275Q Carbide Series case) so it would pull less dust from the ground, as well as allowing me to clean underneath without moving it.
A smartphone holder you can mount on the X axis belt tensioner to monitor your printing process. It is made out of 2 parts, so you can design your own thing. For this type, you will need 3 10X5mm neodimium magnets and some electrical…
I can't seem to find the identical model, but I attached something similar as a reference. It looked the same way, but without the full USB B part. Micro USB, Micro SD, SD on one side, and the Micro USB to the other side. I soldered a…
Just some sphere shaped models you can cover the corners of the table and chairs, splitted, so you can easily print them. I added a threaded version and a cylinder version too. I only printed the threaded version and it did't turned out…
I made these suspended bed handles for the Ikea Kura bed. They seem to wide, not as ergonomical as I hoped, but they do serve the purpose, they are plenty strong. I added a narrower version which should also be strong enough, though I may…
These are all currently available results.
