Bike Stem Smartphone Ball mount for Carholder 17.5mmball / 37mm Pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carholder adapter on bike stem
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
It should fit on a 37mm diameter pipe and the ball diameter should fit any car holder on the market. I would advise inserting a 4mm screw inside for extra strength. Mine broke in between the layers even with the screw, but it remained in place. I also printed fast with 0.8 and with thick layers…
I came up with the V2. Adjusted the wholes for M4 screws and squared nuts.I had the 45mm screw and I cut some of the length.
https://www.aliexpress.com/item/4000075591731.html?spm=a2g0s.9042311.0.0.27424c4dmNbeOq
https://www.aliexpress.com/item/32875607040.html?spm=a2g0s.9042311.0.0.27424c4dmNbeOq
I added the f3d file for the second version
I would recommend printing them using supports for both of them.