1 / 14
Bike Stem Smartphone Ball mount for Carholder 17.5mmball / 37mm Pipe — zdjęcie 1
1 / 14

Bike Stem Smartphone Ball mount for Carholder 17.5mmball / 37mm Pipe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Carholder adapter on bike stem

Ocena
0 / 5
Polubienia
6
Pobrania
38
Wydruki
0
Wyświetlenia
674
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

It should fit on a 37mm diameter pipe and the ball diameter should fit any car holder on the market. I would advise inserting a 4mm screw inside for extra strength. Mine broke in between the layers even with the screw, but it remained in place. I also printed fast with 0.8 and with thick layers…

I came up with the V2. Adjusted the wholes for M4 screws and squared nuts.I had the 45mm screw and I cut some of the length.

https://www.aliexpress.com/item/4000075591731.html?spm=a2g0s.9042311.0.0.27424c4dmNbeOq

https://www.aliexpress.com/item/32875607040.html?spm=a2g0s.9042311.0.0.27424c4dmNbeOq

I added the f3d file for the second version

I would recommend printing them using supports for both of them.

Tagi