Counting matching models…
This is inspired by the "Overly complicated folding 25mm model paint rack" but redone from zero in fusion 360 for practice. The rack will hold 30 bottles of 25mm (or 1"). Brands that should fit include vallejo, reaper, army painter and…
Increased the length of the anti tipping brackets for better stability. This holds the attack deck for a gloomhaven monster, including the monster stat card. This is meant to be used together with thing 2810528 so that dice are no longer…
A quick filament guide because I didn't like any of the other ones.
A improved version of the Ultimate Drawer System. I recommend these drawers , or just use the drawers from the original. Designed to print with 0.4 nozzle and 5% infill . Changes include: diagonal back braces for improved rigidity drawer…
I use a wire grasstrimmer to remove the weeds from between the pavement. Of course that wears out the protective cap that holds the wire spool in. Print this replacement, and keep on weed-wacking! It is highly recommended to print this…
This adapter is for the wall-mounted drybox only If you need this for another size bowden coupler, just drop me a message and I'll change it to what you need. Update V2: Larger hole (3.8mm) that the filament passes through to reduce…
A monster base for Gloomhaven (or any other tabletop) with integrated life or hit point counter. Works great in combination with the Gloomhaven monster attack deck holder The counter rings snap into place and don't move when handling the…
This is a parametrically redesigned version of the original maghex tile system for gloomhaven. The main feature is improved snapping action for the magnets. The tiles that fit into these bases can be found here:…
Installing the bedfans in the rear of the printer makes the air circulate more in a circle when combined with a nevermore micro. Combining two rear bed fans at 20% speed and a nevermore 0.5 at 60% speeds, I reach 30C chamber temps before…
A mount box to hide the cables that come out of the RLC camera. This one is made for my RLC 820A but it will probably fit other models as well. You will need some M3 heat-set inserts to put into the holes. Alternatively just edit the…
So I bought round temparature humidity meters (hygrometer) because I thought the would be handier then the square ones. I was wrong, buy the square ones :) These things are awesome to measure the humidity inside your filament storage box…
A Spacer or riser that fits between the lid and the body of my phrozen sonic mini 4k. The purpose is to feed wires inside the print area (for my printer heater ) without making holes in the lid. A few minor notes: The phrozen sonic mini…
This case protects your mateksys ELRS-R24-P6 receiver, and makes it easier to mount to your RC plane or car. There are two versions, one for straight pins that come with the receiver (I didn't test fit this because I use angled pins.)…
This box is (re)designed to take a 50 watt UV led COB that is powered directly on 220 or 110 volt. Print instructions This box is (re)designed to take a 50 watt UV led COB that is powered directly on 220 or 110 volt. I bolted this onto a…
EMAX Eco II motor mount plate. The holes for the motor are 16mm apart. Use the M3's that come with the motor for “3mm arms”. I recommend to print this in anything but PLA, if your motor gets hot is might cause problems.
Cure and dry your 3D resin prints in mere minutes. I used to have a setup with a UV led strip, but that turned out to take hours. This is a completely redesigned version of the UV resin curing that I currently use. The main idea was to…
This is a adapter plate for a Creality "cure and wash" UW-01 to hold the print bed from your sonic mini and sonic mini 4k printers. It will reach a bit deeper into the var than the default so that about 2 liters of alcohol should be…
A case for your mateksys elrs-r24-v receiver. Designed to fit this receiver but also fits crsf-pwm-v I redesigned the entire model, taking inspiration from this model , and made it fit a bit better. It also snaps closed.
The standard anchor nut for the model C isn't great. This one takes a square nut which is much easier to fixate. The original anchor for the model C has a nut-hole that is too large for the required M3 nut, and will spin around if you…
I snapped the elevator arm from my crack yak XL (which is already a printed part originally). This is a compatible replacement that will snap onto any 5mm rod. The fit might depend on your printer tuning. Just scale the model a few % up…
I got a badly crashed Avios extra 330LX from someone and I'm slowly rebuilding it through the power of 3D printing and glue. Here is another part: winglets I recommend printing these parts at least in PETG or ABS. Something like 4 walls…
Create drone race gates for your tinywhoop using 19 mm pvc pipe for electrics. All possible corner pieces to build drone race gates for your small drone. Ideal for in the backyard, the hinges will allow you to partially fold up the gates…
I got a badly crashed Avios extra 330LX from someone and I'm slowly rebuilding it through the power of 3D printing and glue. Here is part 1: a replacement motor mount and firewall. I recommend printing these parts at least in PETG or ABS.…
The clip things that lock the wings in place on my avios extra 330LX are worn out. This is a quick replacement that I put together. These wing locks should also work fine for many other planes, depending on the angle between the wing and…
I got a badly crashed Avios extra 330LX from someone and I'm slowly rebuilding it through the power of 3D printing and glue. Here is part 2: a replacement cable horn for the rudder. I recommend printing these parts at least in PETG or…
I got a badly crashed Avios extra 330LX from someone and I'm slowly rebuilding it through the power of 3D printing and glue. Here is part 3: a replacement servo horn for the rudder. I recommend printing these parts at least in PETG or…
I got a badly crashed Avios extra 330LX from someone and I'm slowly rebuilding it through the power of 3D printing and glue. Here is another part : a replacement wing attachment plate and clip thingy I recommend printing these parts at…
These connector pieces can be used to build MultiGP gates for drone racing. I've tried to upload every conceivable combination for all gates you might want to create. If you are missing a connection option just let me know and I can…
These are all currently available results.
