P
Printablest0b1
Pegboard hooks for IKEA SKÅDIS
Simple hooks for the SKÅDIS pegboard from IKEA. OpenSCAD files are included for your adjustments.
- Downloads
- 1,331
- Likes
- 220
- Rating
- 4.86
All models
Counting matching models…
P
Printablest0b1
Stronger bottom plate for the volume knob
I have slightly modified the bottom plate of Mikolas' awesome media control knob. It is now slightly thicker, fits more tightly and reduces the flex of the pins holding it to the body. I like it how the entire button feels much more…
- Downloads
- 714
- Likes
- 20
- Rating
- 5
P
Printablest0b1
Corner piece for a tent
Three way connector with a peep hole. Corner piece for three orthogonal rods in a grow tent. STL file for rod OD = 20 mm. OpenSCAD file included for your adjustments. Print instructions Print this thing standing on the corner (peep hole)…
- Downloads
- 705
- Likes
- 139
- Rating
- 5
P
Printablest0b1
Cover for 4x4 membrane keypad
Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…
- Downloads
- 596
- Likes
- 67
- Rating
- 5
P
Printablest0b1
Corner piece for 16 mm rods
Remix for EN16 Stangenrohr or other rods with a diameter of 16 mm. OpenSCAD file is included. The original design is for EN20 (20 mm) and can be found here: https://www.printables.com/model/54914
- Downloads
- 546
- Likes
- 324
- Rating
- 0
P
Printablest0b1
Hinge for PVC pipe
Hinge for EN20 pipe rods. M5 screw, optional zip tie. We used this to attach a gable to our grow tent , like so: You can easily fix this thing to the EN20 rod with a small screw, if necessary. OpenSCAD files are included for your…
- Downloads
- 460
- Likes
- 129
- Rating
- 0
P
Printablest0b1
Floater for mist maker
This is a remix of @ulitiy's nice floater for the ultrasonic mist maker: https://www.thingiverse.com/thing:3900020 This thing floats on packaging foam, rather than on infill air pockets that are rather difficult to print watertight.…
- Downloads
- 358
- Likes
- 36
- Rating
- 0
P
Printablest0b1
Rain sensor housing
Housing for a MH-RD rain sensor module like this one: https://www.az-delivery.com/products/regen-sensor-modul The base box is large enough to hold additional sensors and micro controllers. It also has a slit for a power cable. The surface…
- Downloads
- 345
- Likes
- 35
- Rating
- 5
P
Printablest0b1
Drawer divider for Stanley cabinets
Divider for drawers in STANLEY “multi-use” cabinets. Quick & easy print – ideal for using up small amounts of filament. :) OpenSCAD files are included. Check out my feet for this cabinet.
- Downloads
- 305
- Likes
- 66
- Rating
- 5
P
Printablest0b1
Stopper for a 2.5 mm knitting needle
Stopper for 2.5 mm knitting needles. It helps you not to lose a stitch when you carry your unfinished knitting with you. I remade this with OpenSCAD using a variable for the knitting needle diameter. It is based on Jprints' awesome idea &…
- Downloads
- 299
- Likes
- 55
- Rating
- 5
P
Printablest0b1
Grow tent
This grow tent protects our seedlings against squirrels and birds. It is a remix of various models, which we published individually in the past. We used PETG for all printed parts. We used EN20 electrical pipes (Stangenrohr with 20 mm…
- Downloads
- 297
- Likes
- 97
- Rating
- 0
P
Printablest0b1
Fused C14 switch box
Small, wall-mountable box for a fused C14 connector module with a switch like this one: https://www.amazon.de/gp/product/B07XR579WY OpenSCAD files are included, so you can easily adjust both the box height as well as the cut-out on the…
- Downloads
- 269
- Likes
- 46
- Rating
- 5
P
Printablest0b1
Hanger for TL-SG105 network switch
Wall mounting bracket for our TP-Link TL-SG105 network switch.
- Downloads
- 263
- Likes
- 23
- Rating
- 5
P
Printablest0b1
Shower door hook
Hook for our shower door. The included STL is for a glass thickness of 6 mm. OpenSCAD file is included for your adjustments.
- Downloads
- 240
- Likes
- 72
- Rating
- 5
P
Printablest0b1
Splash guard for mist maker
This is a splash guard – an additional part for @ulitiy's nice floater for the ultrasonic mist maker. His floater is not included; you have to download it here: https://www.thingiverse.com/thing:3900020 … or you can download this remix:…
- Downloads
- 222
- Likes
- 26
- Rating
- 0
P
Printablest0b1
Koppla wallmount
Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…
- Downloads
- 194
- Likes
- 29
- Rating
- 5
P
Printablest0b1
Joystick controller test bracket
Simple test bracket for two KY-023 joystick modules. More fun than I thought. :) I used “Hilbert Curve” as the top and bottom infill pattern. OpenSCAD file is included. You will need eight M3x10 screws and nuts. I also recommend to use…
- Downloads
- 178
- Likes
- 25
- Rating
- 5
P
Printablest0b1
Cable holder for IKEA IVAR shelf
This is more a redesign than a remix. I have created a slightly beefier version for more than one cable plus an additional variant for use with a ziptie. Both have a small hole for a thumbtack, which I found useful. I also noticed that my…
- Downloads
- 165
- Likes
- 59
- Rating
- 0
P
Printablest0b1
Mounting bracket for XL4016 module
Mounting bracket for the XL4016 DC buck converter module from AZ-Delivery.
- Downloads
- 164
- Likes
- 18
- Rating
- 5
P
Printablest0b1
Watering hose clip
This thing holds an OD = 6 mm watering hose. It works well with Gardena's Micro-Drip tube (ID = 4.6 mm). I uploaded two STLs of different length: 12 cm and 15 cm. The longer variant now also has ribs on the hooks. OpenSCAD file is…
- Downloads
- 163
- Likes
- 30
- Rating
- 5
P
Printablest0b1
Roomba stopper for laundry hanger
These little feet lift our laundry hanger to Roomba's bumper height. Now the robot can still move the entire hanger around, but it doesn't trap itself anymore. :) The included STL is for a hanger with a 17 mm diameter foot bar. The…
- Downloads
- 154
- Likes
- 33
- Rating
- 5
P
Printablest0b1
Yarn Spinner (Remix)
This is a remix of mshipman's yarn spinner: https://www.printables.com/model/503275 I modified the base to make it heavier.
- Downloads
- 118
- Likes
- 16
- Rating
- 5
P
Printablest0b1
Drawer divider for 3x3 Stanley cabinets
Simple divider for drawers in STANLEY cabinets with 3 × 3 drawers. Quick & easy print – ideal for using up small amounts of filament. OpenSCAD file is included. This is a remix of the design for cabinets with 6 × 5 drawers:…
- Downloads
- 114
- Likes
- 15
- Rating
- 5
P
Printablest0b1
Handle clip for Euro box
This thing closes the handle slits of a Euro box (plastic crate). The STL perfectly fits the E-4327 Euro Box from Bauhaus. The OpenSCAD file is included for your adjustments. We also ran out of M4 washers, so we printed some and added…
- Downloads
- 112
- Likes
- 28
- Rating
- 5
P
Printablest0b1
Gua-Sha Scraper
Gua-Sha (刮痧) scraper. After printing it, soften it over a hot air gun and slowly bend it as you see fit. This design intentionally has a single fin, rather than the common double fin. We might go back to a uniform thickness (z-height) for…
- Downloads
- 111
- Likes
- 18
- Rating
- 5
P
Printablest0b1
Hose guide
Wall mount clip to guide my irrigation hose. STL for hose OD = 14 mm. OpenSCAD file is included for your adjustments.
- Downloads
- 104
- Likes
- 26
- Rating
- 0
P
Printablest0b1
E27 to GU5.3 adapter
This is a remix combining Biebeer's E27 dummy with my GU5.3 lamp socket: https://www.thingiverse.com/thing:1307963 https://www.thingiverse.com/thing:4746306 OpenSCAD file included for your adjustments. . This combination makes sense if…
- Downloads
- 94
- Likes
- 22
- Rating
- 0
P
Printablest0b1
Grille for airRohr
These simple discs keep insects from hacking my airRohr. ☺ https://luftdaten.info/ You want to print two of them. They should be a tight fit and hold without glue. If they don't quite fit your contraption, you can scale the STL in your…
- Downloads
- 87
- Likes
- 10
- Rating
- 0
P
Printablest0b1
Cover for C14 noise filter
Experimental mounting plate for an IEC 60309 C14 connector with a DIT ID-10AC-S noise filter like this one: https://www.amazon.de/gp/product/B00Y0IHQ5U Just a test to see if I measured the dimensions correctly. OpenSCAD source file is…
- Downloads
- 85
- Likes
- 17
- Rating
- 5
P
Printablest0b1
PC fan to HT DN 75
PC fan (80 mm) mount with grille, funneling into a HT DN 75 pipe. Print this with 3 perimeters for solid funnel/cylinder walls. Here is a matching mounting bracket: https://www.prusaprinters.org/prints/88802 And here is a remix for HT DN…
- Downloads
- 69
- Likes
- 13
- Rating
- 0
P
Printablest0b1
Shower hook
The STL is for a shower rod with a 25 mm diameter, and the hook has a 10 mm diameter. OpenSCAD file is included for your adjustments.
- Downloads
- 67
- Likes
- 7
- Rating
- 5
P
Printablest0b1
Tilt stand for DPS5005 case
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
- Downloads
- 62
- Likes
- 14
- Rating
- 0
P
Printablest0b1
HT DN 110 mount
Mounting bracket for a HT DN 110 pipe. I am currently using this together with a PC fan: https://www.prusaprinters.org/prints/86599 This thing is still a work in progress, but it is very helpful and valuable for the team, that we are able…
- Downloads
- 61
- Likes
- 8
- Rating
- 0
P
Printablest0b1
HT DN 75 mount
Mounting brackets for a HT DN 75 pipe. One STL is male, the other is female. The panel fits both.
- Downloads
- 56
- Likes
- 6
- Rating
- 0
P
Printablest0b1
Mounting bracket for Eltako box
Simple wall mounting bracket for an Eltako box. OpenSCAD file is included.
- Downloads
- 55
- Likes
- 6
- Rating
- 0
P
Printablest0b1
PC fan to HT DN 110
PC fan (80 mm) mount with grille for a HT DN 110 pipe. Based on this design for HT DN 75 pipes: https://www.prusaprinters.org/prints/86600 Initially I tried to mount the fan using just M4 nut traps that lock into the pipe's rubber pocket,…
- Downloads
- 54
- Likes
- 14
- Rating
- 0
P
Printablest0b1
UV-5R PTT dummy
This is a rather trivial remix of the PTT dummy button from Stereogenic. I only made his latches slightly thicker and more flexible after I broke one of them on my first attempt to insert it. Print it with PETG and add supports to the…
- Downloads
- 53
- Likes
- 20
- Rating
- 0
P
Printablest0b1
Slim can stabilizer
Adapter for two types of slim cans in the beverage holder of my friend's car. You can turn the adapter upside-down to hold the other can size. The included STL is for a beverage holder with a 67 mm diameter. The slim can diameters are 53…
- Downloads
- 48
- Likes
- 4
- Rating
- 5
P
Printablest0b1
Flower pot
Several parts that we used to build some self-watering flower pots. Most of them are based on Lechuza's W14Q planter (and W16Q ), but with a small pump and a water tank extension rather than their string-thing, which did not work for some…
- Downloads
- 43
- Likes
- 29
- Rating
- 0
P
Printablest0b1
Display shade for Komerci QJ30xx DC power supply
Display shade for a Komerci QJ3005E bench DC power supply. OpenSCAD files are included. You can easily modify it for similar units. Print instructions I printed this standing to get a uniform surface texture on the entire part. You might…
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
Printablest0b1
Feet for Stanley cabinets
Feet for STANLEY “multi-use” cabinets. Ideal in combination with round felt stickers (17–20 mm). The feet snap onto the cabinet's stacking pins and hold without any glue. You want to print four corner feet and two center feet. You can…
- Downloads
- 36
- Likes
- 12
- Rating
- 5
P
Printablest0b1
Banana plug bracket
Simple sandwich bracket for banana plug connectors.
- Downloads
- 36
- Likes
- 10
- Rating
- 0
P
Printablest0b1
Mounting brackets for PCBs
Somewhat parametric mounting bracket for PCBs. The STL is for a 7 cm x 5 cm proto PCB, but you can easily change that in the included OpenSCAD file. I have uploaded two variants: one for a common DIN rail clip, and another one with…
- Downloads
- 34
- Likes
- 8
- Rating
- 0
P
Printablest0b1
Sausage holder
This thing holds your sausage while you are driving. :) It has a little “drop stop” at the bottom which you can fill with mustard if you like. The included STLs are good for “Bockwurst” and “Pfefferbeisser” type sausages with a diameter…
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
Printablest0b1
Pegboard retainer for quark cups
This is a remix for quark cups. The STL fits “Leckermäulchen”. OpenSCAD file included for your adjustments. :-)
- Downloads
- 29
- Likes
- 13
- Rating
- 0
P
Printablest0b1
Exhaust hose wall mount
Wall mount for the exhaust hose of our aircon. The hose has an ID = 150 mm (approx. six inches). You can use two of them to connect two pieces of tubing. Update: added a slightly taller variant with a grille. See also our hose connector:…
- Downloads
- 28
- Likes
- 9
- Rating
- 0
P
Printablest0b1
Storage adapter for Dyson DC26
With this adapter you can store the Dyson Musclehead floor tool in the storage clip of a Dyson DC26 vacuum cleaner. You might also like this Dyson hose adapter: https://www.prusaprinters.org/prints/19902
- Downloads
- 28
- Likes
- 1
- Rating
- 0
P
Printablest0b1
Infrared LED connector for Voltcraft multimeter
This thing holds a 5 mm LED to the optical transmitter of our Voltcraft VC850 digital multimeter. It should be compatible with VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960. It might even work for the corresponding UNI-T DMMs. I…
- Downloads
- 24
- Likes
- 5
- Rating
- 0
P
Printablest0b1
Wood slat helpers
Slat helpers for 10 mm × 19 mm Flachleiste. We used this to build a cat ladder. Here is the end cap for IKEA Sultanlade: https://www.printables.com/model/256323
- Downloads
- 23
- Likes
- 8
- Rating
- 0
P
Printablest0b1
Plant marker
Plant tags for 47×21 mm labels, using finger food sticks. Labels: https://www.amazon.de/dp/B0002S48TO Finger food sticks: https://www.amazon.de/dp/B0BVG4NC2B OpenSCAD file is included for your adjustments.
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
Printablest0b1
Hose adapter for Klarstein AireLux
This thing connects the exhaust hose from our Klarstein AireLux AC to a 150 mm ID hose. I printed this with PETG. The threads for the AC hose need supports, and they are nasty to remove. See also: https://www.printables.com/model/1354997…
- Downloads
- 21
- Likes
- 4
- Rating
- 0
P
Printablest0b1
Hose connector for Klarstein AireLux
With this thing you can connect an exhaust air hose with ID = 150 mm to a Klarstein AireLux. The clip is optional. I attached it to our adapter with hot glue, but it also works perfectly without the clip. See also our wall mount:…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
Printablest0b1
Mosquito net ring
This thing holds the net of our mosquito trap. It fits into a HT DN 75 pipe. Pipe mounting thing: https://www.printables.com/model/88802 PC fan connector: https://www.printables.com/model/86600
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
Printablest0b1
HR adapter for LED lamp
With this thing you can attach an LED lamp to a Herbert Richter HR GRIP mount.
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
Printablest0b1
The missing 17 mm
This thing lifts our IKEA drawer cabinet a few millimeters. OpenSCAD file is included for your adjustments.
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
Printablest0b1
Mounting bracket for a bright LED
Simple mounting bracket for EGLO CHX 11036 LED-Board_113, 1.1 W, 350 mA, 3000 K. OpenSCAD file is included for your adjustments.
- Downloads
- 8
- Likes
- 5
- Rating
- 0
P
Printablest0b1
Inclined Bittergurka foot
Stabilizing foot for my IKEA Bittergurka flower pot.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
These are all currently available results.