Counting matching models…
My version of a ladybug in 2 parts. I used ABS in my prints. Must use supports on wings. Be careful removing as wings may break in two. Wings pop on w/o glue if not broken, otherwise glue. Use filament for eyes. Photo is of version 1…
Created this model as a way to let my wife know what we were doing for our anniversary. Included a blank version with step file that can be customized. Printed in PETG with no supports needed. Printed as an assembled box. Notch in the top…
Unable to find properly sized O gauge crossing signals so I designed this one. Uses 2 5mm LEDs and can be wired with old fashioned phone wire which I think is 28 or 30 gauge. Base has option of gluing a tube that will fit in a ¼ inch hole…
stackable coasters setup for multi-color prints. I've printed most of these at least once, but didn't take pictures before giving them away. Will post photos as I take them. Unfortunately the layout shows the bottom of the coaster. Print…
large and small butterflies - 2 styles. Designed to print on mini. Small are 3 parts, large are 5. Wings have been designed to print the first 2 and last 2 layers in contrasting color versus the body. Holes in bodies allow mounting to…
Designed to work with older style AC based O gauge model railroad. 3 wires for connecting to switches and separate lighting for LEDs so that they can be lit regardless of whether power is on the track.
Designed like a 1930's filling station. Printed in petg on Prusa Mini. Would easily be updated for other brands.
Printed on a Prusa Mini (with Bondtech extruder) using Flexfill 98 (TPU ok too) Print with supports. Use a heat gun to pull the arms of the grabber in a bit so that it holds the ball firmly. Grabber is installed on a steel shaft that I…
stackable coasters with C1, C3, 50th anniversary and C8 versions. Same format as my other coasters. Laid out for single extruder with 2 to 3 layers per color. Printed mine in PETG with .4 nozzle and .2 layer height. Jan 19 2025 - Added…
Fits newer tide bottles Printed in petg
Art deco style clock using 110mm clock insert - see : Amazon.com: Hicarer 4.3 Inch/ 110 mm Quartz Clock Insert, Gold Trim, Roman Numeral, Quartz Movement : Tools & Home Improvement Various parts have holes locator holes. I used nails…
Simple plaque and frame for awards. Created this for a buddy who wanted to surprise another friend with this farcical organization membership plaque. Included the blank and the Loyal Order Of The Lockwasher blank. Designed in Fusion 360…
designed to print on mini, use ABS, ASA, PETG or PLA with top 2 layers in red and remainder in white on body sections and first and last 2 layers in red on wings. 28 Dec 2021 update - fixed holes in left side Jan 2025 update - added…
Designed this to be able to be printed in different colors of material and glued together rather than having to be painted. Includes 1.25 inch and 1.5 inch door options. 1.25 in door has latches to hold it in place. Windows have latches…
Portable campfire. I started out making this for a GI Joe diorama. My wife liked it so much it's got a home in our living room w/o the Joes. The LED base is designed to work with 3mm flashing LEDs. The flash is built into the LED so…
Various coasters with railroad logos. setup for multiple colors.
Couldn't slice the original to get the Merry in the 4th color. Expanded the depth of Merry and stars. Everything else remains as in the original. It's too large to print on my Prusa Mini so I resized it to 90% in the X and Y directions in…
designed to print in 2 colors on smaller format printer - I have a Prusa mini. Uses a standard clock works. Has locator holes in various parts to allow proper alignment. Clock face to be mounted on inner backer with the clock face…
Inspired by a mid century design this uses a 2 1/8" (55mm) clock insert - Amazon: www.amazon.com/gp/product/B0792VDTM4 Mount on back allows to position in various angles. Print in multiple colors - must use supports on build plate for…
Designed this to mimic the lobby of certain Howard Johnsons motor lodges Glues together with some hardware to enable mounting and cleaning. Need #8 or #10 threaded rod with associated coupling and eye bolt for mounting. Need 4 small wood…
Designed this to host Lithophanes of our recent River Cruise. This pattern has only the blank shade panels. See below for details on panel size and guidance for lithophanes. Added photos of assembly process. Filament I used is Hatchbox…
This is a remix of a design I found on Thingiverse: Round Clock eto by tofuji - Thingiverse Thing #1021435 Used same body and face as in eto clock. No template - these are tight fit anyway. Pull face and body files from Thingiverse. Print…
Designed this birdhouse to model an early Kentucky Fried Chicken restaurant. Printed in PETG. Designed for single color extruder environment. Used a .4 nozzle but the KFC sign on the front of the building might look better with higher…
Replacement ladder for tootsie toy fire engine. Has 3 levels. Printed in PET. Supports on the main ladder section and none on the others. Had to do a little sanding to get the ladders to slide smoothly and not bind.
This is the reason I started 3D printing. My 1953 Chrysler has hard rubber door sill plates and they are falling apart. There is a company selling NORS but they've been on the shelf 30+ years. This is a faithful capture of the original,…
Jumbo fishing bobber - max size to print on a prusa mini. Made mine in PETG. Glue together. I used Goop. Used a hangar for the wire to grab the fishing line. Attribution license but I'm a big fan of the beerware license.
Replacement button for a Lionel transformer. Print in Green
Made this to match my rip off of a Frank Lloyd Wright clock design. Holds standard upright tissue box. Printed on Prusa Mini with Hatchbox ABS Gold and Copper. Need 4 each of tissue box .7, tissue box .2 and tissue box sphere. I printed…
Created this for my low mileage 1991 Cadillac Deville which does not have the adjustable shoulder harness option that is present on newer cars. This pushes the belt down a couple of inches so that it doesn't scrape against your neck. Just…
Updated to remove the ribbons. Added tabs to assist in locating where the locks are. Use the latch and bows from the original or make your own like I did from the boxer head. Boxer is a remix of Boxer Head trailer hitch cover by c3poSAW |…
Print with supports in flex or TPU. print with wide side up as shown. Original part number is embedded in the top of the part and visible in the slicer, but is generally unreadable in the printed part.
Replacement lens for mid 60's AMC cars. Designed in Fusion 360 and printed in PETG. Tested on AACA Region President's 66 Ambassador. Print the outer ring with the narrow side down. No Brim or supports needed. Print the lens with the lens…
Tired of the cork lights only lasting an hour or two? Using it for something other than a bottle? This can help. Use thumbtacks for contacts everywhere. Drop the button substitute into the cork and either tape it in place or cut a window…
Designed for the switch for a 1963 Falcon convertible top. Printed in TPU. Tested on AACA chapter president's car.
Created a different clock for my wife that is a clone of a spindle clock where the originator wants $$ for the model. Respecting their ownership, I will not publish that and instead created this as a variant for anyone and am asking only…
Faithful duplicate of front bumper grommet for 1936 Nash 8 cylinder. Print in flexible plastic. Have done both TPU and flexible PLA. Need to print with supports on Prusa Mini. Printed w/o supports on Creality CR-30 Not available anywhere…
Impossible to find shock absorber bushings for 1936 nash cars. May fit others. Tested on AACA members car. Print with 100% infill with flex or TPU
This is a replacement lens for after market turn signals used on various antique automobiles. The original hardware was produced by Arrow Safety Devices, Medford, NJ. Printed in transparent yellow ABS and transparent amber PETG Printed on…
Reproduction of hood bumpers for a Senior 1936 Nash. May fit other models. Unique to right and left sides. Printed in TPU on a Prusa Mini using 50% infill. Use supports on build plate only and cut away the wall on the interior. The…
Reproduced a vintage Hunt Wilde fat tire bicycle mudflap. Printed in TPU with 0.4 nozzle and 0.2 layers. The originals were mostly single color and this design screams for 2 color printing. The prusa slicer has an option to minimize…
This model is a LED base for a Heart sculpture. The LED base is designed to work with 3mm flashing LEDs. The flash is built into the LED so nothing more than a 2032 battery is needed. I used a combination of red and yellow to get the…
Made from TPU these feet outperform the original feet. The large feet surround the furniture foot and eliminate the concern of rust rings on the patio (see photo). The small feet fit the associated tables and are otherwise hard to find.…
Bumper grommets for 36 Nash - Print in flexible PLA or TPU These were a big pain in the butt to create. I finally resorted to creating a 3D pin gauge specifically for the purpose of determining the overall profile of these parts.…
Spent way to many revisions trying to get the right profile for a 1936 Nash rear bumper escutcheon/grommet and resorted to creating this tool. Cars from the 1920s through 1940s that used these that are not popular/common/expensive enough…
Faithful reproduction of 1959 Dodge Courtesy Light cover. Printed in white PETG. Printed with squares face down on the build plate. Supports used only on tab. Printed with 0.4 nozzle and 0.2 layers. Tested on AACA members car
Forged in Fire - Reused flame and LED base concept used in my other designs. Can be printed as large or small variant with a unique shield for each application. The LED base is designed to work with 3mm flashing LEDs. The flash is built…
Based on the design of the 1870's Waukegan IL USA Courthouse, this birdhouse was made for donation to a charity event attended by Judges, Lawyers and Cops from the Waukegan area. Printed in PETG on a Prusa Mini.
Created this to address the issue of the metal cast feet on a party lite dish scratching things. Follows the outline of the casting and provides a foot at each corner. Printed in TPU with supports. Note: attached gcode file is for a Mini…
Birdhouse modeled after a 1950's/60's Dog N Suds drive in. These were fairly common in the US Midwest until the 1980s. Requires 4 3/4" #6 screws for assembly. Optional #6 eye loop for tree mounting. Has post mount integrated. Hole in roof…
Birdhouse for Greenbay Packers fans, Designed in Fusion360 for printing on a single extruder system. Not tested yet. Logo and Eyes need to be inserted/glued. Have not confirmed fit yet. Will be building for a November 26 birthday. Need 4x…
60th reunion pin made from petg with 8x2 mm magnets embedded in it. Made for my wife. Damm I'm old. Designed to print on a single color system with color changes. Used a .4 nozzle and .2 layers. I used clear, yellow, black and gold. I put…
Bobble heads of our golf group. Printed in petg. Including the body and driver. Make your own heads and bases :)
Traced a scan of a vintage mudflap to recreate it. Print in TPU. Included optional stars for mounting reflectors inside of Including a variant with a wider top for use with wider tires.
These are all currently available results.
