Counting matching models…
The model can be printed using the default printer settings without support. For vase mode, I recommend using larger nozzle sizes: 0.6 mm or 0.8 mm. If you want to print this model in vase mode with a 0.4 mm nozzle, use a 0.10 mm layer…
Cool game for kids. After printing need: 16 round magnets 3x6mm (8 magnets for each side), I used super glue to fix them. 4 marble balls, diameter ~16mm ( one for each level). Parts needs support as marked on picture. After printing pin…
Spacers for IKEA wooden train railways. If you connect correct all railways parts you don't need this but sometimes you want to be creative and feels lack of these spacers =). P.S. You can also found other my wooden train designs here:…
Wooden train barrier. Designed to be compatible to IKEA wooden train set. You have 2 versions of barrier base: Barrier simple base with hand - only stick moving up and down. In my opinion this model is more practical and more interesting…
Pieces for IKEA wooden train railways. Designed to be very close to the original parts. You have here 2 original parts length: 145 mm and 204 mm Special length: 20, 50, 80 and 100 mm Curve part 45 degrees - copy of the original part. P.S.…
Wooden train bridge column. Designed to be compatible to IKEA wooden train set. The idea of this design is to replace classic wood blocks for bridge to something stable that doesn't fail when child play with it. Update 3/12/2023: Added v5…
Model can be printed without supports and brim - all angles are printable, in roof added internal supports. Printed with 3 layers on perimeter. Shared 2 versions: Wooden_train_tunnel - classic tunnel.…
Collection of basic crossroads for wooden train. All models were printed and checked - works good with IKEA set that I have. I think it have to be ok also for Brio set but I didn't check. Added also picture for improved demotions of…
Wooden train "Sun Gate" Designed to be suitable for the IKEA wooden train set. Doors close automatically. Gate designed with trick that always return doors to the initial position after train passing. You have two version of gate: Full…
Model could be printed without supports. Sharing 3 version: 1. 70mm simple version 2. 70 mm version with 6 mm holes for glass eyes 3. 93 mm version with 8 mm holes for glass eyes Tip: Use "seam painting" tool to move seams from the front…
Model can be printed without supports and brim - all angles are printable. Update 25/10/2020: Added simple model with clear surfaces. P.S. You can also found other my wooden train designs here:…
Added 2 models: 1. Pure model - if someone want to change original 2. Model with build in supports - for the print Used one standard magnet 3x6 mm
Update 04/08/2024: I did 2 remixes of this model, they are more friendly to print and assemble. Same model for 7 bottles: https://www.printables.com/model/963630-paints-holder-x7-bottles New model for 8 bottles:…
Wooden train "West Gate" Designed to be suitable for the IKEA wooden train set. Doors close automatically. Gate designed with trick that always return doors to the initial position after train passing. You have two version of gate: Full…
The idea of this toy is to do it simple and lightweight. Before the completion, pause print and put something inside for noisy (I used 7-12 rise grains). Here you have 2 version of the toy with different print ways and complexity. Version…
The first model is same like it was in the movie. The second model is simplified and optimized for 3D prints with bigger details - this is the model that you want to print for children. I also added tree supports for both models and…
Added 2 models: The first one is base model - you can to write all what you want there. Second one is with “1 Kg” mark. For the post processing I used Tamiya putty → sand well → primer → chrome color → (not necessary, but vax or lack can…
This model generated with the help of AI apps. 1. I began with a sketch and asked ChatGPT to improve the picture and add details. 2. In the second step, I utilized the Hunyuan 3D site to convert the image to an STL file. 3. In the final…
To assemble: print one frame part and 2 clips parts. Use filament pieces and glue to connect all together. The holes diameter is 2 mm works good for me with filament 1.75mm. You could use drill bit 1.8mm to clean holes better if need.
The idea of this model was to create piggy bank for banknotes. You will need 2 standard 3(high)x6(diametr)mm magnets and glue. Pining book cover to the base occurs with 20 cm filament peace. P.S. Added book_cover.step file that can be…
These are all currently available results.
