Counting matching models…
Slice it however you like – scale up or down! The lid is simply friction-fit. The original size should fit on a 200mm bed. All walls, tops, and bottoms are 0.8mm thick. Maybe try a 0.8mm nozzle for a fast print!
I printed with ABS at .2 layer height. I used 55% infill, but you could go 100% for more strength. The threads are clipped square on the factory part, probably to ease release from the injection mold. It’s an unnecessary detail, however,…
You will need some longer 3mm x 20mm length screws to make this work. The original screws are Torx T10 security heads. Luckily Harbor Freight sells a set of security bits needed to remove them.
I know Magpul and many other companies make this type of part. This is a printable one. Drill a hole in the bottom of it and attach with a screw. Or drill a ½" hole (matches the o.d.), and glue/epoxy into place. I printed with ABS at 0.12…
We needed to stake a broomstick handle into the ground for a signpost we were making. For best results, print it ON ITS SIDE with some support. It will want to break apart if printed "pointy side up". For more about the signpost:…
A poor-man’s Tech Sights, if you will. It mounts to the rear-most two receiver holes, which are threaded 6-48. Ruger’s 10/22 receiver hole spacing (for the rear 2 holes) is 0.860” center to center. I can flip the barrel-mounted sight down…
I made this because I wanted to use vacuum bags with an older Ridgid wet/dry vacuum. I made a plug for the top end. And I made a hole in the side of the tub for the inlet. The plug is a little oversized! Print at maybe 98%. The inlet…
Use no supports! The arch structure should friction fit in the base. Supply your thread or string to hang the pendulum. It is fun to play with, sliding around gently on the table or desk to create patterns. Fill with sand, salt, sugar, or…
Hello there, friend! This is REX who wants to ride in your WRX A REX and a WRX are lucky things so buckle up, spread kindness, and come home safe to those you love. Will you make some good memories with your REX? leave plain or paint,…
Attach this to the bottom of items to help protect surfaces from damage. Use spray adhesive, glue, or VHB tape to affix to your item. I printed with TPU - 100% infill.
This is a minor refinement of Frank Keene's great model. I just wanted it to feel a little better in my hand. I included a 3MF file if anyone wants to edit further. My photos are a fast 4-hour print with transparent PLA - using only 2…
It slips tightly over the jaws, and I can slip it off if I need to expose the steel again. Quick print with TPU. No supports needed. Print as-is. I used 30% infill and 0.2mm layer height, but feel free to experiment!
It's really simple. I have these neat little Sunon 25mm 5v fans. Perfect for a little SBC. Many of the cases for ‘zero’ model Pi SBCs are passive designs. This is a quick add-on for the remix found here: Orange Pi Zero 2w Case by Dima…
Factory original nozzle, printed in white filament in my photos. The one I designed and printed is red. I printed it on the SX1!
The outrigger allows different types of cameras. The holes should be wide enough for a standard camera screw. Clip to the upright, bolt your camera to the flat or otherwise be creative. It's long enough for a wider camera to have a clear…
Don't print the way the part is oriented. Flip it up on its side so that supports are unnecessary. I printed in PLA with 10% infill, with 3 perimeters, and 0.2 layer height. It's slip-fit for a broom handle we have in the house. It has a…
I am printing with TPU at 100% infill for strength. This is for the heeled portion of some high-heeled shoes. Glued in place with E6000 flexible adhesive.
https://photos.app.goo.gl/jW6CvTzLFB1ukSmY7 - in action! 50mm diameter, to drop through a standard mason jar mouth. Works great in a jam jar. For a little lager jar, just scale the X and Y out to the size you'd like. It works similar to a…
We installed one of these and put it in the wrong spot! To fix our mistake, we needed to fill the hole. Example printed with PETG
My LM2596 boards use standard electrolytic capacitors, which are subsequently taller than the solid caps on other varieties. I tried a few different models, but they were all a little too short for my boards to fit. This model on Cults…
The true power of 3D printing is when we create and share our ideas with the world. The Shark vacuum canister is sealed with some foam-rubber type of gaskets. They fall apart in short order. I can't find replacements, so I decided to…
I wanted some very legible letters that would pop - and Franklin Gothic Bold really speaks that way. I used the Libre Franklin font library from Google and built these in Fusion. I gave each a 3mm border. If you would like to do a…
I have a GMC square body pickup truck with dual fuel tanks. The fuel vapor canister was removed at some point over the last 50 years. The vapor lines were simply cut short, but that means the fuel would spill if I overfill the tank or…
These are all currently available results.
