Counting matching models…
What is this? This is a simple multi-part design to hold a power adapter of various sizes under the desk. This design is meant to use with adhesive tape, though you could easily remix to add screw holes if you'd rather that. I use these…
UPDATE NOV 17 2024: Apparently Seeed makes a whole bunch of XIAO boards now. When I made this project, there were only two options. Unfortunately if you buy certain ones, they won't be compatible . I recommend the SAMD21 or RP2040…
Surprisingly couldn't find one of these modelled up anywhere. Accidentally threw the original out and shipping times out here are usually over a week, so instead of waiting I figured I'd make one so anyone else who needs it can have it…
This is a custom cooling solution for an NF-Crazy Plus hotend on an Ender 5 Pro. The NF-Crazy Plus is a Mosquito clone that is wider than the original Mosquito, but also mounts using the stock Creality mounting solution rather than the…
Wasn't satisfied with the ones I tried so I made this simple one. Only includes one STL. It can be used for either wrist but it isn't symmetrical, so one side might feel better to you (it's tilted forward by ~5 degrees). If you don't like…
I printed a few of BaGooN's design before deciding to add a few modifications. Was struggling to get a clean fit and had to post-process the case each time. This remix changes the connection between the two cases so that it's easier to…
I had an extra small heatsink so I wanted a second cutout. I only changed the “Top”, so go to the original model to get the bottom half!
This is a set of pieces to lower the front crossbar of the Ender 5 down along the frame for better visibility and access to the build plate. There are already some designs out there for this, but most of them drop it by just a bit. This…
What/Why is this?: I decided to bring to the earth what it was sorely missing. A printable adapter to use an LR44 battery in a AA battery slot! It uses a single paper clip as contact for the battery terminals, and comes with two files:…
A nicely sized stupid Among Us shaped fidget toy using a standard MX mechanical keyboard switch and a keycap of various sizes. Fits snug in the hand with a grip similar to holding a phone. Included are files that work with 1U - 2.25U…
I wanted to use an extra microswitch I had (these: https://smile.amazon.com/dp/B088W8WMTB ) as a filament runout detection sensor, but most designs I found were either too bulky, used a different style switch, or made for a specific…
The knob on my air purifier was coming loose and not turning properly, so I whipped up a new one in OnShape. As a bonus, the click isn't so loud. Air purifier model is HAP9425B. I bought it from Target a year ago or so. Included are two…
My X-POWER A-2 duster only came with two nozzles, and I wanted a flat and wide rectangular nozzle. I've also created a smaller round nozzle for fun. I first modeled the threads and tested the fit. Then I modeled the nozzle and boolean'd…
Yeah.. The "eye" has two options: "AmogusPhoneStand_Eye_Singular.stl" to print as one piece in white/grey. Optionally, you can print Eye3 in white and glue it on. or " Eye " 1, 2, and 3 are for multicolor prints. Print "1" in black, "2"…
I took apart my K712's to replace the elastic band and discovered how easy it is to take off the small rounded mesh covers. I never liked how they looked -- I always wished they were flat. Now that I have a 3D printer I can fix that…
Someone smashed the damn lid of my girlfriend's Bath & Body Works perfume cap but I have a device that makes plastic things so I made a plastic thing and it looks good thanks. Prints quick, half an hour or so. Use whatever filament and…
My original sock got caught on a print and tore off. Wasn't really useable anymore so I had to toss it. Klipper started throwing errors anytime I tried to print at higher temps with a cooling fan on so I needed a new sock. It's a pretty…
Loved the original design and how easily everything was printable, but I only had a XIAO controller board available and it has only 11 pins available. Things I've remixed: Removed one key, made bottom right (or top left if you change…
I modified the original to fit a 2020 profile frame. I adjusted the dimensions to be a little taller so I don't even have to remove the original feet on my Ender 5. Print Settings Filament: TPU PLA could work but there are other designs…
An extrusion of the Pizza Hut logo with a hole to attach a keychain to. The keychain hole is 2.2mm in diameter. Snug fit for the keychain I got from [here](https://www.ebay.com/itm/183824820699?var=691959326331), your mileage may vary. If…
Simple print to mount an M12 inductive sensor probe to the stock gantry BLTouch mount. The sensor I use is a PNP - NO - LJ12A3-4-Z/BY. Bought a pack of five on eBay for $15. They work with 5V and so far have been very reliable. Easily…
This is a remix of Burblifetech's remix that includes the cover, but I'm including the original as I've tweaked it quite a bit for aesthetics. I basically remodelled it from scratch so that I could make ones of different sizes easily. It…
rmpel's cover was exactly what I was looking for, only the MW logo wasn't quite right for me as my Ender 5 Pro came with a Landy branded unit instead of the MeanWell. So I quickly edited the logo out, opting to leave a blank space instead…
The Wowstick Mini is a great electric screwdriver, but the stock case only fits two of the four items (one screwdriver + one bit tube). This is a case designed to keep the same functionality of the original case while holding all tubes +…
Purchased an enclosure kit from MandalaRoseworks and printed the handles in the meantime. Didn't realize RatRig changed the hole spacing and no longer supports printed handles. You can find 100mm spacing handles online for pretty cheap,…
Mounts a BIQU Microprobe to E34M1 using any UHF-length + single 5015 fan setup. There are a couple other options out there but I don't like the probe being right up in the front. If you're using a non-UHF setup then this will be too long.…
What is this? My desk has two "3-inch" (measures ~3.15" or just over 80mm) grommet holes with matching power plug fittings. To keep horizontal space free, I decided I want to mount my speakers above it, without resorting to clamp-mounted…
I loved the design of this clockface, and dyslexic's remix was perfect. After printing I decided to add some extra flair to it. This just adds an outline to the clock face, as well as a highlight behind the 12 position. I only made it for…
This is a modification of the replacement lid to mount via small magnets instead of screws. The magnets used are 8mm x 3mm and are glued into place. There is about 0.2mm of tolerance in both directions so any printer should be able to…
Simple piece to hang headphones on one of the legs of the Brenton Studio Callay writing desk. I got this desk from OfficeMax/OfficeDepot and wanted to hang headphones off the side without drilling. Print without supports, suggest 10-20%…
My Phomemo D30 sits at my desk and I essentially don't move it, so I wanted a stand that lets me turn it on/off but it otherwise stays out of the way. Features: Stands flat on a desk, upright. Access to the button as well as tape access.…
These are all currently available results.
