Counting matching models…
This iphone 8 / SE (2nd and 3rd gen) case can be customised to fit you logo in the back, to do so, I have included the “PETG_insert_blank” part in many formats so that you can edit it and punch out your logo (alternatively you could also…
A chain guard for Shimano GRX 1x cranks (tested on FC-RX600 1x). The chain guard should be held with 4 zip ties I recommend printing this model in PETG or ABS, PLA might be too brittle. I printed mine with a 0.6mm wide nozzle and 0.25mm…
This keypad uses : Arduino Uno 3 rotary encoders, with a rectangular base 16mm wide (I repurposed mine from a broken amplifier) 3 buttons 9mm wide square base (the ones that usually come in Arduino kits) a 5mm LED Optionally a slide…
A simple box for 1/4" bits. The lower part has to be printed in TPU (or another flexible filament), the cover can be printed in any material, I printed mine in PETG. I originally made one to hold 8 bits but I since made two better…
This Over Engineered Desk Lamp (OEDL for short) is very loosely inspired by the DIYson lamp, though my main objective was to make mine exclusively with parts I already had on hand. For this reason, I don't really advise that you make one…
TPU protections for the T7 potable SSD. Includes slots to hold the included cables, comes in 2 versions, one for the C to C cable ("..1_C") and one for the A to C cable ("..1_A"). I used a small piece of 3mm line to attach the top cap to…
This set of down tube cable mounts includes a cover for either side (if you don't want to have a cable on either side) as well as cable mounts for both sides drive side (for a rear derailleur cable) and non drive side (for a front…
A small 2 channels audio mixer with volume control on both channels and the main output. I have been using mine for a couple of mounts with no issues. The wiring diagram is included, as well as all of the STL files and the STEP files for…
This kickstand mount allows you to fit a center mounted kickstand to a Surly cross check (and maybe other bikes too but that's the one I designed it for and the only one I've tested it on). It includes a top and bottom part that should be…
This is a bottle cage (can also be used for cargo) that mounts on the forks of the Surly cross check. It might also work on other bikes but I have not tested it. Most likely the only thing that you would have to change is the length of…
These are all currently available results.
