Counting matching models…
Some Plugs to mount Connectors into the skirts of your Voron (USB, JST-XH, M6, M10…) I printed them with ASA. Learn printing before trying this, especially if you are bad at layer adhesion…
A simple mount for umbilical on the Stealthburner with CW2 and Mellow SB2040
update 2026/10/05: a version for the BTT HDMI5 can be found here update 2023/07/09: moved the mounting tabs a bit outwards to make the “sturdy handles” fit between them (surely not on the 250 xD) added versions for the 250/350 (not…
An intake hose adapter for the portable AC to increase efficiency (a lot). Designed for Trotec PAC3500S, but should fit on many others brands, which are most likely the same… the bayonett catch can be found here (150mm) update 2026-07-08:…
Mounted with four M3 Screws Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Filament: M4P ABS-PC Category: 3D Printer Parts
DEPRECATED: A newer and better version can be found here . update 14/07/2022: improved the mounting and sealing of the Cover deleted the mounting holes for the Fan (not necessary) Pictures are from an older Version. BOM: HEPA Filter…
4 M3 Screws needed, it should be printed with something heat resistant like ABS/ASA
An alternative, open lid for the Nevermore V5 to improve efficiency. https://github.com/nevermore3d/Nevermore_Micro
A Fanduct to use the Nevermore Micro V5 Duo as external part cooling on Voron 0/0.1/0.2. https://github.com/nevermore3d/Nevermore_Micro Print it standing without supports. update (06.04.2023, V17): some little adjustments, height fits for…
Akkuaufnahme für die Makita 10,8V Akkus. Eine Datei mit Befestigung am Fahrrad und eine nur mit der Akkuaufnahme. Inkl. FreeCAD-Datei zum anpassen. Battery holder for the Makita 10,8V batteries. For mounting on a (my) bike frame and the…
a drilling jig for 5mm shelf pins with 32mm spacing
An alternative strain relief, if u want to collect a bunch of connectors behind the toolhead
A connector terminal for speaker boxes/subwoofer
designed for Trotec PAC3500S remote control, but should fit on many others brands, which are most likely the same…
Ein Werkzeug zum prüfen des Ventils im Kühlwasserdeckel vom BMW e46. Einfach ein Reifenventil einsetzen, fertig! Unterextrusion kann zu Undichtigkeit führen :p Mit Gewinde nach unten drucken. Die Dichtung ist optional. A Tool for testing…
made for Rainbow DL-T20, maybe fits for other 25mm tweeters
An exhaust filter system for the Voron 0. Features: HEPA-filter active carbon no seal necessary, as the only gap to the outside is on the negative pressure side silent stealth look BOM: HEPA Filter 80x40x15mm (for Medion MD 16192/1850/…
Cap for an M8 caliper bleed screw. Designed and tested on BMW e46 caliper. Printed with Extrudr TPU 88A.
Holder for the remote control of wireless sockets (Wand)halterung für die Fernbedienung der gängigen Funksteckdosen Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 200 Infill: 100…
BOM: HEPA Filter 80x40x15mm (for Medion MD 16192/1850/ Chuwi iLife V1/V3/V5/V5s) active carbon pellets fleece 5 M3 thread inserts 120mm radial fan (SANYO (pictured and recommended) or GDStime) 3 M3 FHCS 35-40mm 2 M3x50 Print it without…
A block to hold the thread inserts to mount the lightweight aluminium gantry on the Voron 0/0.1/0.2
A casting mould to make a silicone sock for the dragon Hotend. Advantages over the original sock: thicker walls less holes more durable nozzle change without removing the sock slot for a thermal fuse chamfers for better airflow One closed…
Webasto T100 remote control holder Category: Organization
A holder for the ABUS Bordo 6000/90 to mount it longitudinal in the back of my fully. Printed with TPU.
I mounted 5mm acrylic Panels (+1mm Foam and .7 VHB on some places). Lots of parts had to be adjusted. Here they are (: If u attach (thread or glue) the screw on the upper part of the hinge and drill the lower part to 3mm, the door becomes…
printed with TPU, they will act as a dowel and a great substitute for those expansion nuts/thread inserts in the car body tested on BMW e46 sedan tailgate handlebar OEM part nr: 51127046911
EXPERIMENTAL: It works, but its not as much fun as i thought it would be. Parameters and macros I used are in the files. BOM: micro-switch brass extruder gear, shortened to ~10mm 5mm pin, optionally with a washer glued on it some screws…
M2 screws and inserts instead of tape moved magnets a bit to the outside 1 mm more clearance for the panels including a drilling jig, to get them precisely in position panel thickness is adjustable in the parameters of the f3d
My solution for the thread inserts at the bottom being pulled out due to the heat weakening the material. One version for flat and hex nuts, you may need longer screws (M3x60). Works great with ABS-PC.
inserts for reinforcement/repair of the e46 tailgate handle (tested on sedan with a "newer" handle bar, which broke again after some years....)
A brace and strain relief for the mailbox toolhead with roundhouse extruder on Voron 0.2.
An extraction system for vacuum cleaner i made for my old AEG jigsaw. Works good, almost no dirt.
Getestet am gut&günstig mit PETG
Apparently my Brake Bleeder wasnt expensive enough. The supplied closure cap is way to big and doesnt fit, so I made a better one. The seal has to be taken from the supplied one.
Rademacher DuoFern 9491 remote control holder Category: Organization
two versions: to print it lying and standing
A casting mould to make a silicone sock for the “crazy volcano” heater block from mellow. Advantages over the original sock: thicker walls less holes more durable nozzle change without removing the sock slot for a thermal fuse chamfers…
A hand knob with M8x1 thread for the Pad Holder of a polishing machine
A repair bushing, the sealing strip (to be printed with TPU) and two nozzles for the "hoover rush" vacuum cleaner
Trapped air is a very good thermal insulation, so I made a tophat with it. Advantages over thin panels on an aluminium frame: superior heat insulation (even with over 70°C in the chamber it barely feels warm) cheap little assembly effort…
designed for the Waveshare OV5693 camera in a Voron 2.4.
A holder for 150mm air-hose with the connector below
tested with TPU 98A on a BMW e46 BMW part number: 31 20 6 777 788
A pad for the Rodcraft jack (RH151 and other) to protect the underside of your car. Tested with TPU 98A with 100% (on the pictures) and 50% infill. Can be adjusted in the skech in the f3d.
An Adapter to mount an universal taillight (50mm hole distance) to the SKS infinity luggage rack.
only one piece, will need some supports additional hardware: 2x M3x16 screws 2x M3 nuts 2x M2x8 screws
designed for the "Teslong TD300"
A casting mould to make a silicone sock for the TZ Hotend with V6 nozzle (with and without an extension). Advantages over the original sock: thicker walls more durable nozzle change without removing the sock (longer to use it with an…
designed for the combination of SKS GERMANY INFINITY UNIVERSAL MUDGUARD FRONT 75 27.5" - 29" fox suspension fork Litemove RX-E90
A casting mould to make a silicone sock for the fluxheat Hotend. Advantages over the original sock: thicker walls more durable nozzle change without removing the sock
For BMW e46 sedan/touring facelift. Just clamp it between lamp socket and housing, no glue necessary.
A 4-piece tophat for the Voron 2.4 (and maybe others, like the trident). Made for and tested on the 350mm and then simply adjusted by -50mm. Why? a lot more Space at the top, now mine can move over 350mm in Z more stiffness (nevertheless,…
designed for Trotec PAC3500S, but should fit on many others brands, which are most likely the same…
An adapter to mount the DXC to the mailbox toolhead
protective cap for 2t jack stands to get a flat, soft surface I printed them with TPU 98A and ~70% gyroid infill.
A simple dummy to test if it would fit. https://esxaudio.de/ve900.7sp.html
print it on a smooth surface buy a fly-screen-set, put a bit of the velcro strip on the underside and dispose the rest
a stand for the 1l underbody protection tin cans
These are all currently available results.
![Voron 2.4 tophat with integrated touchscreen [BTT HDMI5 edition]](https://media.printables.com/media/prints/e6fd58f1-433b-4146-9f21-02fd0e59fc1d/images/14001041_2fddb673-59ef-4281-8275-0b9862fe62d6_cb419792-28fe-4356-8e29-36d5ef1fbc27/dsc01467.jpg)
