Counting matching models…
A VERY LOUD air horn/membranophone that uses a balloon as the diaphragm. A larger version of my small air horn. Great at sporting events, but don't point it at others when you're too close - that would be a good way to "start a…
A replacement cover for a Truma hot water heater for caravans. Fits nice and snug and operates the same way as the original. Category: Other
See version 2 here: https://www.printables.com/model/1861575-customisable-tow-bar-hitch-cover-v2-with-text-and - Add images directly to the cover, Text placement optimised, Defaults optimised for flexibility/strength. A customisable and…
This is a customisable bahtinov mask generator for astronomy/astrophotography that will generate bahtinov masks that can be fitted over your telescope or lens. The defaults are set for a Celestron Origin as that's what I have available…
A parametric bottle cap generator with option to include a customisable spout/pourer. I love Steve's Parametric Bottle Cap / Jar Lid and I'd been generating caps and manually adding spouts to meet my requirements. I've become familiar…
A small but VERY LOUD air horn/membranophone that uses a balloon as the diaphragm. Great at sporting events, but don't point it at others when you're too close - that would be a good way to "start a conversation" (it is VERY loud). I…
This is my first crack at an OpenSCAD file. I started out just making a very plain spike, and it evolved a little. Strangely, I don't play golf, but it makes a nice tee. Good for all sorts of spikes, pins and golf tees. I've included the…
A Gelblaster Speedloader to fit on a bottle with a PCO 1810 cap/thread (most soda/drink bottles)
A set of stakes for your tripod to make repeated setup in the same spot quicker and easier. Levelling and polar alignment had been taking more time than I wanted it to, so I made these to place in the back yard. Setup now takes about a…
Many thanks to @BikeCyclist for the original SCAD design - it resonates with me. I was a teenager when the game was released and I spent a lot of pocket money on it. I've just added the alternate appearances of the three main icons to…
Don't have a holder or sleeve for your remote control but want to mount it on the wall? This will produce a customised sleeve to hold your remote control and can include holes for screw mounting if desired. The internal dimensions of the…
This started as a simple screwtop container, but grew in complexity as I decided I wanted more from it. You can add holes in the lid, add a label in the holes, and add inlaid text to the lid. There are a lot of customisable parameters,…
A clip to hold a Gliderol garage door opener that you can stick on your car console, door jamb, garage wall etc. to keep your remote opener handy. Designed for a snug fit using a scan of a remote
A customisable parametric generator that produces a nozzle that will fit directly onto a Dyson V7 - V12 stick vac. No other adapters required. The actual Dyson fitting is a constant in the generator. The generator adds a nozzle to the…
This is an expansion on my Soda Can Stacker, and gives a lot more flexibility in design. This customiser allows flexibility to create short or tall sleeves for stacking jars, cans, soda cans etc. as well as creating stackers in a matrix…
A customisable parametric funnel with optional vent fins, handle, and extended rim around the top of the spout. The SCAD is the main file here, but I've also included some STL files as example of funnels that can be produced. Customisable…
I was a little miffed at not being able to properly stack loose soda cans on top of each other, so designed this solution. The primary file is an OpenSCAD script that allows you to customise a sleeve to easily and securely stack soda cans…
I've had a few of the nut covers from the rear suspension on my Chief Darkhorse "borrowed" and wanted a printed solution so I could maintain a matching look across the motorcycle, so I designed this cover to replace the missing originals.…
Fully customisable rails for sliding storage of chopping boards, trays, print plates, or any other flat or flattish object. Mount underneath a cupboard or a shelf to hold a chopping board or tray. Mount on the side of a 3D printer…
Customisable parametric generator for inner/outer measuring calipers. Modified and released by Stuart Mackie under CC0 29 Aug 2026 This version addresses an issue in the original openscad script where the orientation of the large arms was…
A customisable and parametric cork or bottle stopper with additional customisable settings for optional rounding, optional hole for breather or thermometer/probe etc. and optional customised flange/cap on the top. Designed to use with…
This container was designed to hold a Celestron Origin Filter Tray with filter fitted. The Filter tray is also available
Celestron Origin diffuser cap that holds a flat field filter for generation of flats or material for a solar filter. The cap fits over the dew guard (light friction fit) and has a bayonet fitted retainer that screws over the end to hold a…
A customisable, parametric phone holder using OpenSCAD. You can customise the size of the tray that holds your phone as well as many other parameters on the model to get the design you want. Utilises a tray mounted on sliding rings for…
A VERY LOUD air horn/membranophone that uses a balloon as the diaphragm. A larger version of my small air horn. This is remixed from my Large LOUD Air Horn / Membranophone to use screw in connections instead of push-fit (…
A customisable, parametric flanged bush with options for three different types of locking fingers/clips to plug the end of a PVC pipe, mailing tube, other cylinders. Customisable parameters include: sleeve outer diameter sleeve thickness…
A customisable book opener / page holder generator that produces page holders from SVG or DXF files. SVG files shoild be a simple filled outline, or a filled pattern outline. A number of SVG files are included for use as templates. SVG…
A cover for gas bayonet plugs to keep out dust etc
Fully customisable and parametric Soft Jaws for your vice, bench clamp, etc. OPENscad customiser: Enter the length, depth and height of your vice jaws, the required soft pad thickness, and the thickness of the top and side walls. You can…
A customisable parametric generator that creates a clip to hold a power lead to a conduit/pipe/hose. I wanted a way to hold power leads to dust collector pipes in my workshop without resorting to twine or zip ties. Works for data…
A customisable and parametric tow bar hitch cover to stop your hitch filling up with rubbish. This is version 2: you can now add an SVG or PNG to the cover. Measure the inner width of the hitch, the outer width of the hitch face, and the…
A plug for gas bayonet sockets to keep out dust etc
A parametric (OpenSCAD) generator that will generate a pair of press fit rings to make a diffuser from a white t-shirt to use as a flat field generator. This is an alternative to my twist lock diffuser ring. This is sized to fit the…
A 35mm standoff for ASNZ standard light and power switches. Use this to install a wallplate externally. The .3mf has negative parts for the wallplate screw holes to allow easy changing of the diameters if you wish. SVG hole cutout…
A clip that mounts on the handlebars of your motorcycle to hold a Gliderol garage door opener. So much more convenient than stopping and looking for the opener. Just click it from your handlebars on the way into the driveway. Suits 25mm…
A cover to go over the top of the gliderol garage remote holder mount. Designed primarily to be used in conjunction with my garage remote holder handlebar mount so it's not so obvious sitting on your handlebars. You can still operate the…
Different brands of clogs have different sized holes and thicknesses, and even different sized holes on one clog. I designed this so I could get a snug fit in different clogs and holes. Emboss, embed or engrave text or emojis on clog…
A customisable, parametric generator that produces a sleeve to hold a juice box, milk box, squeezy juice pouch etc. so you don't accidentally squeeze it all over the floor or anywhere else. SO handy for preventing a mess when you give a…
A customisable, parametric round lidded container with optional text and image on the lid. I wanted something for my mother to put her (deliscious) traditional homemade shortbread rounds in. This is what resulted after tinkering.…
A dust cover for a Giotto for Origin Smart Flat Field Generator to keep dust etc. off the flats screen when it's not in use. Category: Hobby
Cut it, roll it, tuck it, press it, done. Simple and effective. Recycle your old newspapers and magazines one seedling at a time. This is an OpenSCAD generator for a press for making paper seedling pots that you put straight in the ground…
These are all currently available results.
