Counting matching models…
Customizable sharpening guids for whetstones / sharpening stones. There are various other versions of such guides available, but none of them made me 100% happy. This one is customizeable in size and keeps the rubber band safe in its…
Heltec Wireless Stick (Lite) v3 case Parts needed: Heltec Wireless Stick v3, either in the Lite or "normal" version including the antenna cable. 4 ruthex style M3 inserts, d=4.6mm, h=5.7mm 4 M3x12 screws, all kinds with flat heads should…
This is a remix of the nice "super simple hose plug parametric OpenSCAD by RacoonX", featuring sharp rectangular ribs instead of the original round ones. Also I've added a hole to mount the plug on a piece of rope or wire. The provided…
ADXL345 mount for 40mm fans like on the RatRig EVA. Customizable for other fan sizes. Takes 2 M3 inserts to mount the sensor and M3 hex screws with 3mm high head to mount the fan and sensor mount.
There are various versions of these tools around, but I wanted to have one that doesn't look boring, works well and is customizable. This is the result. With a 0.6mm nozzle I would suggest 3 outer layers, with 0.4mm at least 4 to make…
To cite the original description: “This jig can be used to align your leadscrew accordingly. The best way is to slide it from the top onto the rail. The leadscrew should slightly touch the jig, a minimal distance between the leadscrew and…
Bullet-Toggle as used by Advance for their paragliding cockpit attachments. Customizable in openscad. Source also available on github: https://github.com/bzed/openscad-parts/tree/main/bullet-toggle Print Settings Printer Brand: Creality…
3d printed bearing removal tool Simple tool to pull ball bearings out of their socket. github project Forks and pull requests are welcome! Fork me on github! Short howto The provided STL files support type 6000 bearings. If you need…
I've designed these balls to make handling the brakes on longer flights easier for my fingers. They work well for me and you don't need to open the knots to mount them. Just screw the parts over the triangle/loop on the upper side of the…
Adapter to mount a DC42 Differential IR height sensing board instead of a BLTouch. Should fit all extruders with a BLTouch mount, as long as there is enough space for the board. The board is a bit wider than the BLTouch. The photo with…
The door of my v-Hive was not 100% flat and sealed in the area under the handle, so I've remixed the original magnet holder to snap on the door handle screws. Can be used for all kinds of 2020/4020 and similar extrusions, use M6x12 screws…
Currently you have to wear a FFP2 mask while using skiing lifts in Austria. These little hooks allow you to attach and remove the mask while wearing your helmet. You might need to add a knot on both sides to keep the mask tight, this will…
Holder to mount David Crocker's Mini Differential IR height sensing board on the (old style) Creality print heads as used on the CR10/CR10s/Ender 3 and similar printers. See https://miscsolutions.wordpress.com/mini-height-sensor-board/…
The first sterilization made the adapter of the mouth piece shrink a bit in size, so the whole thing did not properly fit anymore. Printing a new one was easier than complaining. Use TPU or a similar soft material, otherwise you might…
Print in TPU / Flex, 95A works well. You might want to inspect the print layers, I've moved the ring one layer down to get rid of overhangs that can't be printed, there is no issue in doing so. Make sure you lube the ring and pump…
Print as all your other wallet parts. Sized for the old model of the chipolo cards (the non-rechargeable one). Easily adaptable to other cards using OpenSCAD and the sources from…
These are all currently available results.
