Counting matching models…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
Needed bigger under desk drawers with no handles. Too many charging cables to store :) They are pretty sturdy, reasonably deep at 45mm and with the handle on the base of the drawer. Just screw the frame into the desk using the four pre…
A small Paint Mixing Tray for modelling complete with Brush Rest/Holder. Size 105mm x 50mm. The one in the picture is scaled 20% bigger in the slicer and printed with 10% infill. Addition 27 Oct 2023. added a larger version (130 x 80mm)…
KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…
Addition 3 Nov 2023 : Redesign : File Name AnkerMake M5C Bin V2 Added a Taller wall to prevent bits flying over the edge. increased width by 5mm to go under the build plate a bit more. changed rear design to better fit the AnkerMake Mast.…
Trying to declutter my desk and keep the things I use most to hand. This 3 part model holds a Phone / Stylus / Pencil / Pen / Ruler plus other bits and bobs. Uses just over 80g filament and takes around two and half hours to print. Just…
MT VICE - ROTATE & TILT VICE WORKTABLE NOTE UPDATE 12 FEB 2025 : REWORKED BOLT AND SIDE CLAMP SO THERE IS NO LONGER ANY HORIZONTAL MOVEMENT. ( just need to download and print MT VICE 5 - Side Clamp and MT VICE 2 - Main Bolt) 150mm Square…
A Utility box for the AnkerMake M5C to match the Filament waste box AnkerMake M5C waste box V2 by Peter Martin | Download free STL model | Printables.com Size 160mm x 80mm x 25mm approx 2hour precision print with 20% infill.
Large Shed Door Hinge I haven't got any interesting 3D projects on the go at the moment so while painting the shed I decided I needed to design and print a new set of hinges for the door. Hopefully they will hold up well. They are approx…
Before downloading this version, check out the new much improved single arm version that rotates and tilts, available in my other models :- MT ROTATING MODELING PAINTING VICE by Peter Martin | Download free STL model | Printables.com…
A simple toilet roll holder designed to be stuck on tiles using 3M Self Adhesive Pads. created using Fusion 360.
Bonsai or Plant Pot with or without Tray. Needed a larger planter for my Bonsai Tree so designed this one along with a tray to allow the water to run through. There are two versions of the planter, one with a few drainage holes (hence the…
A more stylised Model Turner Display. It will need supports, but they were easy to remove. You can mix and match this design with the original model turner : - Model Turner for Painting or Viewing. Rotating Table. by Peter Martin |…
I needed a small box to keep near my printer to hold my most commonly used tools for cleaning etc. Box Size is 90mm x 120mm x 60mm high. I use mine to keep a small bottle of Isopropyl, Snips, Scraper, Tweezers, Allen Key, & a Cloth.
BACK TO THE FUTURE Hill Valley Clock Tower - DICE TOWER ‘ Does not require a 1.21 gigawatt power supply ’ Four main parts and an optional dice tray.
Desktop Tablet Stand Trying to declutter my desk so reworked my existing model :- Keyboard / Tablet Stand - Adjustable Tilt by Peter Martin | Download free STL model | Printables.com The desktop tablet stand now holds three Pens, a Ruler…
A Festive Fireplace to charge your phone and keep you toasty. Should work with a lot of phones up to 20mm thick. I designed it around my iPhone 13 pro. The back piece slides forward and backwards to hold the phone in place. You can add a…
Update June 2024 - Now with flat sides for easier print. After recent 2 day UK heatwave, would recommend printing in at least PETG, as one of the PLA ones deformed. A couple of rear seat hooks for the TESLA Model Y. One with Optimus and…
Set of Three Jars and Tray Sorting out my garage and needed a few small containers, so to keep my 3D printers busy I made these. I will probably need some bigger ones, so there will be a larger size to match uploaded in the near future. A…
Element Under Desk Drawers I wanted larger deeper drawers under my desk, so I created this set with four interior options. It is just over 70mm deep x 200mm wide x 200mm in length. I used a tolerance of 0.7mm so the operation is smooth.…
COMPACT TRAVEL PILL BOX I wanted a compact travel pill box for trips away, so I watched dozens of YouTube videos on making custom threads in Fusion 360 and after forgetting most of what I saw still managed to come up with this. Comes out…
TINY TUBS Tiny tubs for Tiny Stuff! A set of tubs, wall mountable or free standing. Each tub slides easily in and out of the holder and has a clip on lid, the standard tub is 40mm x 40mm x 40mm and the Taller tub is 40mm x 40mm x 85mm.…
A washing Machine Drainage Tray and Key This is something I made a couple of years ago but I have just updated it and decided to upload it. Its a tray that slides under the washing machine drainage hole to catch most of the water when you…
An accessory for the Model Turner / Display . (links below) If you want to change the table top colour without reprinting the whole model, this will come in handy. Just print in the colour of your choice and place over the original model.…
Ipad / Tablet Desk Stand Needed a new desk stand for my ipad so designed this to go with my HEX themed iphone stand. It comes in two parts and rotates for no particular reason. Can be used without the base. No Supports needed. (choice of…
Phone Stand - Tilt Adjustable Updated 29 August 2024 - Now with optional 100mm base and phone retainer with charging hole. Designed a phone stand to match my recent Keyboard and Tablet Stand. Keyboard / Tablet Stand - Adjustable Tilt by…
UPDATE VERSION 5 - Single Arm 10 DEC 2023 - Much Stronger Another option for a filament guide for the Anker Make M5 Printer. Holds Steady due to wedge in between post and Filament holder. Needs supports, but they are easy and quick to…
Model Turner V5 - Rotating Table Just a small update on my earlier Model Turner, making it look a bit nicer, adding some accessory holes and including a lower optional base.
Eye Glasses Holder A simple Eye Glasses Holder to help prevent your glasses getting damaged when not being used.
dB BOOST Mobile Phone Sound Booster and Desk Stand Designed for the iphone 13 pro, the slot size is 80mm x 15mm, so any phone within those dimensions and with the speakers at the base of the phone, should work ok. It does increase the…
Pod carousel 40 - Coffee Pod Holder for 40 Nespresso Pods V3 improved stability and strength, smoother rotation and a locking bolt so it can be lifted and moved easily. Holds 4 columns of 10 pods. Prints in four parts without supports.…
Simple Towel Holder / Hanger for Small Towel.
MAG-DOCK PULSE Bedside Mag Safe Charger Stands for iPhone standby mode. There are currently 4 versions to choose between, depending on the charging puck you currently have. Mag-Dock Pulse - Iphone NEW Puck - for use with the new charging…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
Pod Carousel 20 -Rotating Coffee Pod Holder for Nespresso pods. This is a smaller version of the Pod Carousel 40 and holds 4 columns of 5 pods, it prints in three parts without any supports. Bolt goes through base into tower, tighten till…
A Zen Garden with six golden vases. comes in multiple parts that just slot together. Zen Tree GREEN (slots into the two holes on the right at the back) Zen Moon Marble WHITE (slots into the next hole along to the left of the tree) Zen…
Bathroom Dental Organisers with a HEX Design Small Version without toothbrush holder and a longer version with toothbrush holder Designed to match the Shaving Organiser / Soap Dish and Ornamental Box in my other models. The smaller one…
EDIT 28 Nov 2023 - Improved Clip added to hold the pedestal together much tighter. A DISPLAY COLUMN / PEDESTAL It can be scaled down in the slicer. At 50% smaller scale you can fit a top, a base and the six clips onto the baseplate, which…
UPDATED 18 MAY 2025 After using this for a week away I decided to add a Lid to enable easier access to one days pills. A simple 7 compartment insert for the excellent 7cm x 5cm Container Pod by Squinn, now with Rotating Access Lid,…
Hex Coaster and Holder. New set of coasters for my desk and outside when the sun turns up. Holder takes upto six coasters. Printed in PETG so they can be used outdoors. No supports needed. added a optional clip on base for extra style if…
A Holder for Shaving Foam, Razor, Balm, Aftershave, small comb and scissors. Keep your stuff handy and tidy. SIZE 205mm x 75mm x 45mm : New Design October 2023. A NEW improved version now available : - Shave Organiser by Peter Martin |…
A Set of Trays for the PRUSA MK4 printer. Two Side Bins and two front trays that all fit snuggly around the Prusa MK4. The front trays just slot over the side bins. You will need supports on the front trays.
Two Containers for Cotton Make-Up Pads. 50mm Cotton Pads Tub For 50mm Circular pads (upto 58mm Diameter pads should fit). This design has a lifter to manually raise the pads up to get at them easier. There are two versions one with text…
A Simple Wall holder for the Blink Sync Module 2. Just use a decent 25mm double sided tape to stick it to the wall. Approx 10g of filament at 15% infill - 30 minute print on a Ankermake M5.
Hook & Ladder Fire Station from Ghostbusters Movie - Storage Box A storage box based on the Hook & Ladder Fire Station from Ghostbusters. Why? you ask, 'I couldn't help it, it just popped in there'. RENDERED IMAGE
A Free Standing organiser i made to keep my nuts, bolts and screws handy. It may be what someone else is looking for. Holds 16 x 25mm drawers and 2 x 50mm drawers. Size is 155mm High x 120mm across x 40mm Depth. You can either cut card to…
A Designer Box for Valentines Day. Use as an ornamental or gift box, interior size 92 mm x 92mm x 75mm. All models are in correct orientation for printing with no supports needed. You will need to print : - 1 x Box BODY 1 x Box FRAME 1 x…
A under desk drawer for keeping bits and bobs to hand. Use sticky back felt to line. Sticks to desk with 3M Adhesive pads. New Under Desk Drawer March 2024 Under Desk Drawer by Peter Martin | Download free STL model | Printables.com
A twin Arm version of the AnkerMake M5 Filament Guide. A secure and strong filament guide with a totally unnecessary second arm, but what the heck. I used 25% infill and sliced in the above position using supports. If you want the single…
MT Ascent - Adjustable Height Model Turner / Work Table This is a print in place, Quick Operation Height Adjustable version of my original Model Turner, the adjustment range is 135mm to 200mm , the base can be used with all my other Model…
Nespresso Coffee Sleeve Storage A storage frame to keep your Nespresso Coffee Pod Sleeves in. Makes it easy to stack and access the sleeves. There are 3 sizes to choose from, a 25 Sleeve, a 16 Sleeve and a 9 Sleeve. I have included…
Remote Control Tray We use an all in one remote control but need to keep the original remotes handy, just in case. We store them in a Footstool / Pouffe, so to get at them easy I made this tray to store them. Just in case anyone else has…
TISSUE BOX COVER - 115 x 101 x 122mm A request from my Wife for a Tissue Box cover with circle pattern and matching Tray, nothing fancy, just may be useful. Covers a box that is 115 mm x 101mm x 122mm which seems pretty standard. Printed…
A Desktop Rubbish Bin to keep at the side of your printer for the filament bits etc. Size 80mm bottom to 100mm at the top. Height 110mm. Trash Can prints without supports but the lid need supports. Printed on a AnkerMake M5C.
Wheels for your Prusa MK4, because turning a wheel is more fun than turning a knob . They all just push on over the top of the existing knob, although its better to take the knob off first and push that into the wheel. It works very well…
A One Piece Broom Holder Just thought i'd have a go at devising a single piece broom / tool holder for a standard brush stale. It appears to work ok for a standard uk brush stale (diameter approx 23mm). Not sure how long it will last but…
AAA and AA Western Revolver Styled Battery Dispensers Just messing around in Fusion and made this Revolver style battery holder to keep six AAA batteries to hand. In three pieces, easy to print with no supports needed. Slot the Barrel…
Garden Edge Fencing Now its getting warmer time to tidy the garden. Needed to replace the wooden edging around the grass, so I designed this panel that uses a small clip to join one to another. Its looking good so far but I've run out of…
A Wall Soap Dish and a Bonus Standing version. A multipart Soap Dish that can be stuck to the wall with Strong 3M Adhesive Pads or Tape (room for 110mm x 25mm of adhesive tape). I've included a Long Leg so that it can also be used as a…
SHAVING ORGANISER / TIDY. Keep your bathroom neat and tidy with this Neat Shaving box. Fits Shaving Gel/Foam, Aftershave, Balm , Razor, Small Comb and Small Scissors. Razor hole large enough for a Gillette Heated Razor. Sizes Shaving Foam…
Paint Storage Boxes for Revell and Humbrol , also an empty box version. Simple boxes to store Revell Email Color / Enamel Paint 14ml tins in. There is a box that holds 15 tins and a box that holds 30 tins. Complete with lid. Humbrol Paint…
Rotating Work Table 180 UPDATE : 16 Feb 2025 - added optional Adjustable height Base that goes from 100mm to 200mm. Can be used with other Model Turner variants. Just a simple update to my Model Turner giving it a simpler redesign, making…
A Designer Box with Lid. Japanese style with the word Love in Japanese on one side. Internal Dimensions 94 x 94mm x 80mm high. you need 4 of the LEGS and NUTS. The Text will need to be glued on, but there is engraving on the box to show…
Needed to raise my Katana Soundbar over my monitor stand. Just in case its useful to someone else i've put it on here. Screws in as the originals do. Finish off with felt on the bottom to avoid scratching your desk. Ive also made a set of…
A HEX themed Toilet Roll Holder. Prints without supports. I used Honeycomb infill at 40% for extra strength. Printed with Prusa Galaxy Black PLA. ( Temp 210 : Bed 50 )
A Multi Part Ornamental Box - HEX Design Inside dimensions 94 mm x 94 mm x 74mm Print the Legs and the Nuts with at least 25% infill. No supports are needed.
Inspired by the recent Starship launches, i made this coaster and holder and printed in PETG for use outside. I used PETG Black and then PETG Translucent grey, which turned out nice. I have included a holder for four coasters.
Worx Work Table Peg Riser This is a remix of Mikebald's Worx Table Peg for use with the pegasus work table. I have just made it so you can print a TPU pad and attach to the peg.
Self Cantering Desktop Mini Vice A small self centring vice for your desktop. Designed to look nice on your desk and be at hand whenever you need it. Being self centring keeps the model in the centre of the vice for balance and at only…
TESLA Phone Stand - The Future is sustainable. A Desk Stand that should hold most mobile phones.
KEY WRAP - 2 to 3 Key Holder Recently cut down on the number of keys I needed to carry around, so decided to make a small key wrap to hold upto three keys. You will need a 15mm to 20mm M4 Round Head Nut and Hex Bolt. I have included a few…
A Small Acrylic Paint Stand and because nothing should do only one thing a holder for one paint brush. Just wanted to keep a few colours to hand while painting so designed a holder, fits REEVES 12ml tubes very well. Also holds Hobycraft…
A bathroom tidy to hold an Oral B Toothbrush , Toothpaste , Floss and some toothpicks. Keep your items neat and tidy and to hand.
Desk Snake V3 A complete redesign of my original Cable Snake flexible cable tidy. I have been using an unreleased version of it for several months and it works a lot better. I have since made a few more improvements and this is version 3.…
A stand for the Kindle reader, designed in 2022 using Tinkercad, but only printed recently. Thought it may be useful to someone else.
Three Rulers with handles. 15cm ruler 25cm Ruler 15cm Ruler with Protractor - (draw lines every five degrees.) The rulers in the render below are a Two Colour Print using 3 filament changes. Start Filament - White First swap at Layer 8 to…
FEB 24 : Updated to a HEX Design as I decided I didn't like the first one :) I've left the original one on so there's a choice. Been redoing all my bathroom stuff and decided the Oral b clock needed to match the new colour scheme. The…
ADDITION 24 NOV 2023 A version that is customisable, instead of dice it has sliding clip boards that you can put stickers on or make your own cards to slide in. (2 new files added, Clip Board and Clip Board Cube). Just print the Clip…
The Colosseum Side Bins. Wanted to pimp the Prusa, so went for the Ancient Rome look as I like the Marble Filament. Fits snuggly in place. Prints without supports.
WORX WX027.9 Torch Holder Just a clamp to hold a Worx Torch in place. Its a bit tight but works well.( If you want it a bit looser just scale it an extra couple of percent. I printed with 30% Gyroid infill and 6 walls in PRUSA PETG.…
Gillette Razor Blades Holder Just a simple holder in case its of use to anyone else. Designed to stick on the inside of a bathroom door cabinet, it will hold a pack of 4 Gillette blades.
Play a Festive game of Tic Tac Toe next to the Festive Fire Place. Tic Tac Toe in carry case that holds 5 Santa's and 4 Reindeer. Leave it set up on display during the holiday for a quick game for guests to play. Comes in 4 main parts…
Blink Mini Camera Stand. An adjustable Camera stand for the blink mini. Can be free standing or wall mounted.
'ONE OF THESE TUBS' A set of three containers with lids and a tray / holder. The tray has the following text on it. ' IT'S IN ONE OF THESE TUBS I KNOW IT IS ! ' There is a small and a large tub to choose from. the small tub is 65mm x 65mm…
Servo-T - Profile A simple slide on Servo Tester Case make the cheap servo testers more rigid with this quick and simple slide on case. I have made three other cases for this tester , while I had some spare time, if you are interested let…
A Ice Scraper that holds an AirTag, because why not? Wanted to try something with fixings so thought i'd try an ice scraper while its the current thing. Add a bit of extra security to your car by putting an Airtag in the Ice Scraper and…
Designed a little Bin to go on my Desk. A handy little bin for storage or waste 100mm Tall x 60mm Diameter Interior. available with the Word BIN on it or PLAIN. Printed in Prusa Galaxy Black and Polymaker Marble White.
diymore ESP32 and LCD Development Board cases Not sure if they are of use to anyone else as I don't know how popular these boards are, but I've been having fun making some small desk gadgets and needed cases to hold the electronics. There…
Nesting Tray Set Space is at a premium so I Created a Compact set of nesting trays for holding parts in while I work. There are 9 trays nesting within each other and a Lid , the largest tray is 100 x 100mm x 22mm and the smallest is 40mm…
1980's Sinclair Spectrum Games Character Checkers Set Characters from games on the Sinclair Spectrum back in the 1980's as a Draughts / Checkers Set. Each Draught is 30mm Diameter and 5mm high. An optional storage Box is included. 1 :…
CREATIVE Sound Blaster X Katana Sound Bar FEET 95mm. Needed to raise up my sound bar to fit my new On Desk drawers under, so created these to lift it up 95mm. The sound bar is pretty old its a Feb 2018 model so not sure if the feet will…
Print without supports. Use a 3M sticky pad to fix to wall/skirting and some self adhesive felt on the end to protect the door.
Remote Control Caddy A multi part Remote Control Caddy. comes in 7 parts, The Main Box, An Inner Box, Four Screw In Feet and a Stick on Sign. (requires glue for sign). Forgive the shade change on the black, ran out of filament, had to use…
A Small Desiccant Box SIZE: 40mm x 20mm x 12mm Needed some small desiccant packets but only a large tub of beads, so I made this little one with a clip on lid. Not sure if its of use to anyone but thought I'd share anyways. Only uses 3g…
GATE PROTECT Designed to stop the handle of my gate hitting the wall when opening. Offering a spring back effect that worked a lot better than expected. Printed in PETG, so it will hopefully last a while outside as it takes 5 hours to…
A chunky Keyring with the space x logo on it. I am just starting to learn Fusion 360 and will hopefully have a version that holds a Apple Airtag done soon.
Just needed a Catch to hold the gate open so they don't swing shut and get damaged. A simple two piece latch that slides over the handle to hold it open. The latch is flexible enough to stretch over the wall plate when fitting. Printed in…
Element Crafting Desktop Bin with X Stand. A request from my wife, she wanted a large-ish desktop bin on an angle while she is crafting. So I designed these simple X stands and Bins , the Large is 110mm x 110mm x 120mm and the Small is 75…
KEY WRAP 2.0 Decided to update my key holder (mainly because I wanted to have a go at making a print in place hinge). This model holds upto 3 keys, folds open for easy changing of them and has a built in keyring hole. Requires an M5 x…
Blink Mini Camera Cover Just a simple cover for the blink mini to temporally cover the camera lens.
