Counting matching models…
Imported from thinginverse and slightly modified parts for easier printing. All credits to david_0429 on Thinginverse. Print all parts flat side down and glue everything together. Body needs to be printed in angle with raft or supports. I…
Funnel for Harley Davidson Twin Cam primary oil. Print upright and use brim. Model doesn't need supports. Should print fine with 0.6n nozzle. PET-G is suggested filament. Inspired by original Harley part.
Simple reminder for your coworkers or friends who you share tools with to return the damn tools.
Simple case for storing euro bills. Fits 5, 10, 20 and 50€ bills. Print upright as shown in picture. For Euro Coins see my Euro Coin Holder V3: (2023-10-16) - Made it WIDE to fit a lot of money. Each slot is 25mm wide. - Slots are now…
Simple USB-extension holder I made for my Mini to move USB-port out of of enclosure for easier reach. Modeled using measurements from Fuj:tech estension cable. I used double sided tape to attach base part to enclosure, then slided cable…
This is a remix. Removed tabs , I felt they make attaching too hard as you have to allign props perfecttly so they don't get pinched. Added text to outside, because I'm not gonna tell them apart otherwise.
Version 2 of my basic S-hook. Made clip tighter, but springier. Printed on PET-G, not tested on PLA, might work as well There's versions with different gap size, all of them should snap easily on bar atleast 2-3 times the size of the gap.…
Had some problems with some filaments not sticking to bed, so I made few benchmark shapes and sliced them in 5*C intervals between 180-230*C Some times the temperatures given in box are not the best ones ;) Files are sliced for Prusa…
Simple holder for trash bag roll. Install it with screws or double sided tape. You'll need one L and one R file or one mergerd Both file. Parts have end stoppers, so install these with the roll you're intending to use to get correct…
Remixed Prusa Enclosure parts for 2mm plexiglass It's hard to find 3mm plexi near where I live, so I remixed necessary parts for 2mm plexiglass (which is way cheaper too) Fitment is quite tight, my caliber measured 1.94mm. This might also…
Simple holder for euro coins (5¢ to 2€, since we don't use 1 and 2 cent coins in Finland) You can scale it in Z direction to fit more coins. Denomination order can feel unintuitive, but this version focuses more on space optimization than…
Simple panel for two 22mm switches. Made this for my Lack enclosure. Left one currently controls lights and right one will eventylally control pinter's power via relay. Screw holes are for 4mm screws. 3.3. Added label parts for lights and…
Few simple drawers for empty Clas Ohlson spools. Might also fit other spools, dimensions are as follows: - Inner diameter 100mm - Outter diameter 200mm - Spool inner “height” ~62mm You'll need 2pcs of M3 bolts (choose lenght as you…
Simple hexagon shroud for your Delta-P fan modded MK3S+ 5015 part fan. Had part fan crack slightly when tightening too much and screw head going in the fan hole, so I created should for the fan. Fully support free. Optimized dimensions…
Added mesh in front of fan and cut a hole for easier GPIO access. Use PET-G . PLA will most likely deform under Raspi's temperatures. Bottom parts can be found from the original model of which gcbenlloch's remix is also based. Original…
You are OLD - Cake topper Two versions, one for simple color change and other for MMU etc. See file names. 3mf's are presliced for Prusa Mini+ 0.4n/0.2mm and Prusa i3 MK3S+ w/ MMU2S 0.4n/0.2mm
Skoda V/RS Keychain. MMU and filament swap versions. For MMU part use MMU painting (in PrusaSlicer) or included prepaint 3MF For filament swap version set changes on 2.6, 3.0 and 3.4mm heights (assuming use of 0.2mm layers)
Box for 4 relay card (HL-54) with sliding lid. Holes for input and output. Nothing special, just simple box. Use M3 screws to hold board in place.
Simple sstand for 42mm temp / humidity gauge. Made for these (Type D) china eBay gauges, but should work with any 42mm gauge. Stand is angled a bit for best viewing angle. Print hole down. Mine is printed with 0.6n 0.3mm using PrusaSlicer…
My cars' winter tyres where fitted on Tekno Wheels rims, and the center hole caps were in really bad shape, so I made these. These fit 48mm center hole. Scaling on XY might allow you to fit them on other hole sizes too. STL is just plain…
Never start a print with wrong nozzle again! Needless to say, I've had wrong nozzle on few times. Sizes in this are .25, .4, .6 and .8 There's space for 7 spots if you want to remix and add or remove sizes. Angle between spots is ~51*…
Christmas cap for Clippy . Morea seasonal stuff coming later. 3mf has layer change and supports already in place. Check color change layer after slicing, if you use other than preset 0.6nozzle or layer height. Update 3.1.2023: - Scaled…
Remixed this clip to fit my LowePro Stealth Reporter D300 AW camera bag. Might fit other LowePro's bags too. Print with as many walls as it needs to get the bending parts be walls only. I printed mine with 3 walls (on 0.6n), so for 0.4n 4…
Timelapse trigger holder for d3v-163-1c5 microswitch. I suggest using long arm version of the switch. Will be triggered at X=0, custom G-code needed for timelapse (see below). Print clip side down, as show in print bed image. Clips can…
Needed a stand for my Biltema clock, made a stand for my Biltema clock. Can fit others, is made for: - Diameter: 38cm - Thickness: 37,5mm Pressure fitted, so thickness needs to be quite exact.
Spacer for Filalab spools. Had hard time tightening and loosing gravity spool holder nuts with Filalab spools due their spool shape. This little spacer helps a lot. (See pictures for difference) Spacer sits nicely to spool and stays on…
Simple frame for 42mm round temperature + humidity sensor for 3030 (should fit others too) extrusions (Prusa Mini, but can be fitted to others). Modeled for these chinese gauges (D-type), should work with other ~40mm gauges too. Few…
These are all currently available results.
